American Fibertek ECR-16-PoE+ Specsheet
ECR-16-
PoE+
SERIES
FEATURES:
Transmits up to distances of 3280ft (1km)
Supports mega-pixel technology
Supports PoE 802.3af & 802.3at &
Power Over Coax PoC
Connects up to 16 ECT-1-PoE+ units and IP
cameras
Supports 10/100 over RG59 cables
Easy installation
LED indicators for link status and power
SPECIFICATIONS:
Ethernet:
Speed…………………..…10/100/1000Base-T
PoE…………………….…802.3af (15.4 Watts)
PoE…………………….……802.3at (30 Watts)
Connector..............................................RJ45
Cable Type……………………..Cat5 or above
Max Distance (Cat5)............... . 328ft (100 m)
Coax Interface:
Impedance………………………………….75Ω
Connector………………….……........(16) BNC
Distance(RG-59/U)……………..2625ft/(800m)
Downstream Data Rate…………..… 40 Mbps
Upstream Data Rate………..……… 10 Mbps
Power:
Input Voltage..…………………….100-240VAC
PoC/PoE Voltage...............................48 VDC
Power (without PoE/PoC load).............. 32W
Power (with PoE/PoC load) ......... 500max W
Power (with PoE+/PoC load) ..... 1000max W
Environmental:
Operating Temp.........................0 °C to 50 °C
Storage Temp........................ -40 °C to 85 °C
Humidity..................................... 5 % to 95 %
MTBF...........................................>100,000 hr
Size:
Rack-Mount 1RU………….…19” x 11.8” x 1.7”
483 x 300 x 44 mm
ORDERING INFORMATION:
ECT-1-PoE+ EoC Transmitter
ECR-16-PoE+ 16 Port EoC Receiver
1/2015 JPK
Ethernet over Coax (EoC) 16 Port Receiver
with PoE+ and PoC
The American Fibertek Series ECR-16-PoE+ solution allows for the
utilization of existing coax cable infrastructure to support bi-directional
data from 16 ECT-1-P transmitters and IP cameras or other network
devices. The AFI Series ECR-16-PoE+ receiver power supply provides
Power Over the Coax (PoC) to power to 16 ECT-1-PoE+ transmitters
which also provides PoE+ to the IP cameras. The PoE power supply is
ordered separately.
The AFI Series ECR-16-PoE+ link is a system containing a transmitter
and a receiver that requires very little installation and no set up or
configuration. The system can quickly turn any ordinary RG59/U coax
cable into an IP network communication path.
The units packaging are constructed of black anodized aluminum with
corrosion resistant finish. LED indicators show the status and activity of
network communications.
The AFI Series ECR-16-PoE+ system is designed to be completely
transparent to the network. Simply connect your network devices to the
networking ports on the transmitter and receiver and, using with existing
coaxial cable infrastructure, the system begins communicating.
Up to
16 IP
Cameras
ECR-16-
PoE+
Network
Switch
COAX
PoC
PoE
Up to 16
ECT-1-
PoE+
Trans-
mitters
Loading...