American Dynamics SpeedDome Ultra Drone III User Manual

D A T A S H E E T

SpeedDome® Ultra Drone III Fixed Camera

Features That Make a Difference:

Identical in appearance to the full-featured SpeedDome Ultra

Friction bearings hold camera in set position

Powerful visual deterrent

Multiple mounting options

540 line color camera inside

Interchangeable with SpeedDome Ultra (fits standard and I/O board

mounting bases)

Choice of 2.5 - 6 mm, 3.8 - 9.5 mm, or 9 - 22 mm auto iris lenses

Manual focus, zoom and iris adjustments

0.65 lux CF1.2

Camera and eyeball of drone can be manually adjusted after

installation

Compatible with SpeedDome Ultra outdoor housings

The SpeedDome Ultra Drone III is a fixed camera housed inside

the SpeedDome Ultra chassis. This 540 line color camera – with

its choice of 1/3-inch, auto vari-focal lenses – provides a value

driven alternative for users who require fixed camera coverage,

but like the appearance and deterrence of a full-featured dome

camera.

The 370˚ pan and 90˚ tilt mechanism enables the internal

camera and the eyeball to be manually positioned in any

orientation. The friction bearings hold the camera in that fixed

position, pointing at the desired camera view. The manual

lens controls allow for zoom, iris and focus adjustments as

necessary. A dummy model is also available without a camera/

lens assembly.

For maximum flexibility, the drone can accommodate both types

of SpeedDome Ultra mounting bases – the standard mounting

base and the I/O board mounting base. This means that the

drones are interchangeable with SpeedDome Ultra without

the need for any re-cabling. The interchangeability allows you

to install the drones at a facility and then replace them with

programmable domes as budgets and/or needs change. In

addition, you can interchange the drones and the domes as

surveillance requirements change.

S P E C I F I C A T I O N S

Model Numbers

Housing/Eyeball Assemblies

ADSDUDH2506N . . . . . . . . . .Drone Color NTSC, 2.5-6 mm

ADSDUDH2506P . . . . . . . . . .Drone Color PAL, 2.5-6 mm

ADSDUDH3895N . . . . . . . . . .Drone Color NTSC, 3.8-9.5 mm

ADSDUDH3895P . . . . . . . . . .Drone Color PAL, 3.8-9.5 mm

ADSDUDH0922N . . . . . . . . . .Drone Color NTSC, 9-22 mm

ADSDUDH0922P . . . . . . . . . .Drone Color PAL, 9-22 mm

Mounting Bases

ADSDUDPTB . . . . . . . . . . . . .Standard Mounting Base

ADSDUIOB . . . . . . . . . . . . . . .I/O Board base

Pre-Configured Drones/Mounting Bases

ADSDUDH2506PTN . . . . . . . . Drone Color NTSC, 2.5-6 mm with standard base

ADSDUDH2506PTP . . . . . . . .Drone Color PAL, 2.5-6 mm with standard base

ADSDUDH2506ION . . . . . . . .Drone Color NTSC, 2.5-6 mm with I/O base

ADSDUDH2506IOP . . . . . . . .Drone Color PAL, 2.5-6 mm with I/O base

ADSDUDH3895PTN . . . . . . . . Drone Color NTSC, 3.8-9.5 mm with

ADSDUDH3895PTP . . . . . . . .Drone Color PAL, 3.8-9.5 mm with standard base

ADSDUDH3895ION . . . . . . . .Drone Color NTSC, 3.8-9.5 mm with I/O base

ADSDUDH3895IOP . . . . . . . .Drone Color PAL, 3.8-9.5 mm with I/O base

ADSDUDH0922PTN . . . . . . . .Drone Color NTSC, 9-22 mm with standard base

ADSDUDH0922PTP . . . . . . . .Drone Color PAL, 9-22 mm with standard base

ADSDUDH0922ION . . . . . . . .Drone Color NTSC, 9-22 mm with I/O base

ADSDUDH0922IOP . . . . . . . .Drone Color PAL, 9-22 mm with I/O base

standard base

Operational

Pan Travel . . . . . . . . . . . . . . . .370˚ with end stop

Tilt Travel

. . . . . . . . . . . . . . . . .90˚

Camera Synchronization Video Output Connector

. . . .Line-lock

. . . . .Female BNC

Camera

Imager. . . . . . . . . . . . . . . . . . . Interline transfer 1/3 inch CCD array

Scanning System Video Output S/N Ratio Horizontal Resolution Minimum Illumination White Balance NTSC Effective Pixels Scanning Horizontal Vertical PAL Effective Pixels Scanning Horizontal Vertical

. . . . . . . . . .2:1 interlace

. . . . . . . . . . . . .1.0 Vp-p, 75 Ω, composite

. . . . . . . . . . . . . . . .50 dB (typical)

. . . . . . .540 lines at center

. . . . . . .0.65 lux (f1.2 lens)

. . . . . . . . . . . . .AWB

. . . . . . . . . .768 (H) x 494 (V)

. . . . . . . . . . . . . . .540 lines, 60 fields, 30 frames

. . . . . . . . . . . . . .15.734 kHz

. . . . . . . . . . . . . . . .59.9 Hz

. . . . . . . . . .752 (H) x 582 (V ) pixels

. . . . . . . . . . . . . . .540 lines, 50 fields, 25 frames

. . . . . . . . . . . . . .15.625 kHz

. . . . . . . . . . . . . . . .50 Hz

Lens

Design. . . . . . . . . . . . . . . . . . .Vari-focal

Focal Length

Aperture . . . . . . . . . . . . . . . . .f1:1.4

Mount . . . . . . . . . . . . . . . . . . .CS

Viewing angle

2.5-6 mm

3.8-9.5 mm

9-22 . . . . . . . . . . . . . . . . . . . .30.7˚ x 22.7˚ (wide) & 14.1˚ x 10.6˚ (tele)

Field of View Formulas Horizontal View = (4.4 x A)/B Vertical View = (3.3 x A)/B A = distance from camera (mm) B = lens focal length (mm)

. . . . . . . . . . . . . .2.5 to 6 mm, 3.8 - 9.5 mm, 9 - 22 mm

. . . . . . . . . . . . . . . .108.2˚ x 80.4˚ (wide) & 47.6˚ x 35.6˚ (tele)

. . . . . . . . . . . . . . .74.2˚ x 54.0˚ (wide) & 30.0˚ x 22.4˚ (tele)

Electrical

Input Voltage. . . . . . . . . . . . . .24 VAC, 50/60 Hz, Class 2 LPS

Design Tolerance

Power . . . . . . . . . . . . . . . . . . .7.5 watts, maximum

. . . . . . . . . .16 to 36 VAC, 50/60 Hz

Mechanical

Height . . . . . . . . . . . . . . . . . . .205 mm (8 in)

Eyeball Diameter Weight Chassis and Camera Standard Base I/O Board Base RDULTRA Shipping Weight

. . . . . . . . . . .120 mm (4.7 in)

. . . . . .0.85 kg (2.2 lbs)

. . . . . . . . . .0.06 kg (0.14 lbs)

. . . . . . . . . .0.16 kg (0.36 lbs)

. . . . . . . . . . . . . .0.66 kg (1.45 lbs)

. . . . . . . . .1.7 kg (3.74 lbs)

Environmental

Operating Temperature. . . . . .-10˚ to 50˚ C (14˚ to 122˚ F)

Humidity . . . . . . . . . . . . . . . . .0% to 95% RH (non-condensing)

Storage Conditions

. . . . . . . . .-20˚ to 65˚ C (-4˚ to 149˚ F)

Regulatory

Emissions . . . . . . . . . . . . . . . . FCC: 47 CFR Part 15, Subpar t B Class B

Immunity . . . . . . . . . . . . . . . . .CE: EN50130-4

Safety . . . . . . . . . . . . . . . . . . . UL1950

CE: EN55022 Class B AS/NZS 3548, Class B CISPR22, Class B ICES-003

CSA22.2 No. 950 EN60950-1 IEC 60950-1

Accessories

Optional Bubbles* for Top Hat Mount

RUCLR RUSLV RUSMK RUGLD

Installation and Removal Accessory

RHIRT

Mounts and Adapters

RHIUTH RHIUHC RHIUFB RHIUAB RHOPN RHIU3X3 RHIU4X4 RHIU2X2 RHIUIB RHIUCM RHIULWM RHSDA

* Bubble diameter and depth 176 x 86.5 mm (6.93 x 3.4 in), weight with trim ring

. . . . . . . . . . . . . . . .Clear Bubble (f0)

. . . . . . . . . . . . . . . . .Silver Bubble (f2.0)

. . . . . . . . . . . . . . . .Smoked Bubble (f1.0)

. . . . . . . . . . . . . . . .Gold Bubble (f2.0)

. . . . . . . . . . . . . . . . .Installation and Removal Tool

. . . . . . . . . . . . . . . .Top Hat with trim ring

. . . . . . . . . . . . . . . Hard ceiling bracket (requires RHIUTH )

. . . . . . . . . . . . . . . .Fixed bracket (requires RHIUTH)

. . . . . . . . . . . . . . . . Adjustable bracket (requires RHIUTH)

. . . . . . . . . . . . . . . .Pendant Mount

. . . . . . . . . . . . . . .3 x 3 in mounting plate

. . . . . . . . . . . . . . .4 x 4 in mounting plate

. . . . . . . . . . . . . . . 2 x 2 ft tile mount (special Top Hat included)

. . . . . . . . . . . . . . . . I-Beam mount with I-Beam adapter

. . . . . . . . . . . . . . .Wall mount with corner adapter

. . . . . . . . . . . . . .Long 0.6 m (24 in) wall mount

. . . . . . . . . . . . . . . . SpeedDome snap-hinge housing adapter

0.13 kg (4.4 oz)

Product o fferings and s pecif icatio ns are sub ject to ch ange without notice. Actual produ cts may var y from photos. Not all p roduct s includ e all feat ures. Availab ility varies by region; co ntact you r sales r eprese ntative. Certain product name s mentio ned her ein may be tr ade nam es and/or re gister ed tradem arks of oth er compa nies.

www.americandynamics.net