American Dynamics RHIUCM Specsheet

Page 1

FEATURES

Dome Mounts

American Dynamics’ family of programmable domes is complimented by a comprehensive line of mounts to accommodate any indoor or outdoor mounting requirement. These mounts

are compatible with the SpeedDome Series, and the SpeedDome Optima Series of programmable domes.

Choose from a variety of wall mounts, corner mounts, pole mounts, ceiling mounts, pendant mounts and over-the-roof mounts for both indoor and outdoor applications. Depending upon the requirements of the application, indoor mounts can be used with or without an

Ultra

Complete line of indoor

•

and outdoor mounts to suit any mounting requirement

Compatible with

•

SpeedDome Ultra, SpeedDome Ultra Drone, and SpeedDome Optima Series of programmable domes

Lightweight, aesthetic

•

design Meets IP66/NEMA 4

•

(outdoor mounts) and IP40 (indoor mounts) standards

Tamper-resistant

•

Corrosion-resistant,

•

waterproof design Choose from different

•

varieties of ceiling, wall, pendant, corner, pole, and over-the-roof mounts

Ground-level assembly of

•

dome/housing/end cap for quick, safe and efficient installations

optional bubble. The mounts’ innovative end cap and pendant cap design enable the mount and housing to be assembled on the ground, allowing for a safe, quick and efficient installation.

www.americandynamics.net

Page 2

RHIUTH

op Hat Housing with

Trim Ring

RHIUIB

I-Beam Clamp

RHIUHC

Hard Ceiling Bracket

RHIUFB

Fixed Bracket

RHIUAB

Adjustable Bracket

RHIU2X2M

2’ x 2’ Tile Mount

RHIU2X2P

2’ x 2’ Tile Pendant

Mount

RH2X2

2’ x 2’ Tile Mount Plate

RHIUIBM

I-Beam Mount Assembly

This Top Hat housing with trim ring and plastic base mounts directly to a ceiling or to an indoor mounting structure. It is a metal enclosure that houses the dome. The trim ring is slightly larger so that it completely covers the Top Hat’s met

al rim. The RHIUTH is plenum rated.

This bracket enables the Top Hat housing to be recessed in the ceiling (requires RHIUTH Top Hat). The bracket is mounted to the Top Hat and installed in a hole cut in the ceiling - perfect for sheet rock, plaster or solid ceilings. The hard ceiling bracket can be installed entirely from below the ceiling; the installer will not have to access the area above the ceiling to install it.

This bracket enables the Top Hat housing to be recessed in the ceiling or in a 2-foot drop ceiling tile (requires RHIUTH Top Hat). The bracket is mounted to the Top Hat housing and installed in a hole cut in the ceiling. The bracket distributes the weight of the dome and Top Hat housing across the T-bar framework of the ceiling. It is also very useful for sheet rock, plaster, or solid ceilings.

This bracket enables the Top Hat housing to be recessed in drop ceiling that utilize other than 2-foot grids (requires RHIUTH Top Hat). The bracket distributes the weight of the dome and the Top Hat housing across the T-bar framework of the ceiling, and is adjustable from 632-1219 mm (24-48 in).

This mount enables the Top Hat housing to be recessed in a 2’ x 2’ drop tile ceiling. The ceiling tile is removed and the white tile mount is simply dropped in its place. A Top Hat housing and plastic base are included in the kit.

This mount enables the pendant mount to be installed in a 2’ x 2’ drop tile ceiling. The Top Hat housing/dome assembly also mounts to the structure. The mounting kit includes a 2x2 plate and pendant hardware. The plate attaches to a 1.25” pipe, provided by the customer, then affixes to the Top Hat housing/dome assembly. If mounting a SpeedDome Optima with this model, a RHOPN ceiling pendant mount kit is required.

This mount enables the dome to be recessed in a 2’ x 2’ drop tile ceiling. The ceiling tile is removed and the tile mount is simply dropped in its place.

This assembly enables the dome to suspend from an I-beam; it includes the clamp, pipe tee, nipple, and flange. The clamp attaches to a 1.25” pipe, provided by the customer, then affixes to the pendant hardware. The Top Hat housing/dome assembly also mounts to the structure.

SpeedDome Ultra Series SpeedDome Optima

157 x 175 x 175 mm

(6 x 7 x 7 in)

6.7 x 293 x 127 mm (.29 x 12 x 5 in)

212 x 179 x 56 mm

(8 x 7 x 2 in)

180 x 632 x 100 mm

(7 x 24 x 4 in)

180 x 1219 x 100 mm

(7 x 48 x 4 in)

190 x 607 x 607 mm

(7 x 24 x 24 in)

47 x 605 x 605 mm

(2 x 23 x 23 in)

47 x 605 x 605 mm

(2 x 23 x 23 in)

6 m (max.) x 293 x

127 mm

(20 ft (max.) x 12 x

5 in)

Galvanized steel

Steel

Galvanized steel

Aluminum, cold rolled steel, ABS

plastic

Aluminum, cold rolled steel, ABS

plastic

Painted 

aluminum

Steel and

galvanized

steel

2.9 kg

(6.4 lbs)

This clamp enables the dome to suspend from an I-beam. The I-beam clamp is installed in combination with the RHOPN Ceiling Pendant Mount to affix the Top Hat housing/dome assembly in I-beam installations. This clamp is also included with each RHIUIBM.

.77 kg

(1.7 lbs)

1.5 kg

(3.3 lbs)

.70 kg

(1.6 lbs)

1.8 kg

(4.0 lbs)

2.3 kg

(5.0 lbs)

2.7 kg

(6.0 lbs)

5.4 kg

(12.0 lbs)

1.7 kg

(3.8 lbs)

Product

Description

*Dome

Weight

Dimensions

Construction

Safety

Compatibility

(HxWxD)

This mount allows an outdoor dome housing to be suspended from an outdoor ceiling or horizontal surface. It can be installed using either 1.25'' NPT threaded pipe or rigid conduit, either new or existing, up to 3 meters  (10 feet) in length.

SpeedDome Ultra Series

SpeedDome Optima

1.8 kg

(4.0 lbs)

115 x 120 x 120 mm

(4.5 x 5 x 5 in)

Powder coated

aluminum and 

ABS plastic

RHOPN

Indoor Pendant Mount

Indoor Mounting Options

Page 3

RHIU3X3

3.5” x 3.5” Mounting Plate

RHIU4X4

4” x 4” Mounting Plate

RHIUCM

Wall/Corner Mount

RHIULWM

Long .6 m (24 in)

Wall/Corner  Mount

RHOSW

Short Wall Mount with End Cap Assembly

RHOLW

Long Wall Mount with End Cap Assembly

RHOWCA

Corner Bracket Adapter

RHOWPA

Pole Strap Adapter

RHSDA

Ceiling Pendant Mount

This mounting plate enables the dome to mount to a standard 3.5” x 3.5” duplex electrical box that is installed in the ceiling. The Top Hat housing/dome assembly also mounts to the structure.

This mounting plate enables the dome to mount to a standard 4” x 4” duplex electrical box that is installed in the ceiling. The Top Hat housing/dome assembly also mounts to the structure.

This mount positions the dome away from the wall, enabling it to see over furniture, shelving, and displays. The mounting structure attaches directly to a flat wall, inside corner, or outside corner. The Top Hat housing/dome assembly also mounts to this structure.

This mounting structure attaches directly to a flat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter, this short wall mount can be affixed to corners as well as poles. This mount’s compact design with mounting cover hides the mounting plate to provide a clean and aesthetically pleasing appearance.

This mount positions the dome away from the wall, enabling it to see over furniture, shelving, and displays. This mounting structure attaches directly to a flat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter, this long wall mount can be affixed to corners as well as poles. This mount’s compact design with mounting cover hides the mounting plate to provide a clean and aesthetically pleasing appearance.

This adapter bracket enables the long and short wall mounts (RHOSW and RHOLW) to affix to outside corners. Its powder coated aluminum construction ensures an extremely sturdy installation.

This adapter bracket enables the long and short wall mounts (RHOSW and RHOLW) to affix to outside corners. This option contains stainless steel straps that can be daisy chained to accommodate any size pole. The kit also includes all the necessary mounting hardware. Its powder coated aluminum construction ensures an extremely sturdy installation.

2 x 90 x 90 mm

(.08 x 3 x 3 in)

2 x 105 x 105 mm

(.08 x 4 x 4 in)

With dome installed 224 x 101 x 201 mm

(9 x 4 x 8 in)

With dome installed 413 x 123 x 772 mm

(17 x 5 x 31 in)

With dome installed 366 x 218 x 282 mm

(14 x 9 x 22 in)

With dome installed 366 x 218 x 587 mm

(14 x 9 x 23 in)

185 x 210 x 125 mm

(7 x 8 x 5 in)

138 x 79 x 27 mm

(5 x 3 x 1 in)

Straps support

53 to 951 mm

(2 to 38 in)

pole diameter

106 x 205 x 250 mm

(4 x 8 x 10 in)

.09 kg (.2 lbs)

.14 kg (.3 lbs)

1.8 kg

(4.0 lbs)

2.7 kg

(6.0 lbs)

1.3 kg

(3.0 lbs)

1.7 kg

(3.9 lbs)

.79 kg

(1.75 lbs)

.5 kg

(1.1 lbs)

1.4 kg

(3.0 lbs)

SpeedDome Ultra Series SpeedDome Optima

Galvanized steel

Painted steel

Powder coated

aluminum, ABS

plastic, and fiber

filled PVC

Powder coated

aluminum, ABS

plastic, and fiber

filled PVC

Powder coated

aluminum

Powder coated aluminum and

stainless steel

Anodized

aluminum

This mounting structure attaches directly to a flat wall, inside corner, or outside corner. The Top Hat housing/ dome assembly mounts to the structure for a quick and easy installation.

This adapter allows a SpeedDome Ultra to be retrofitted into an existing SpeedDome housing via the housing's snap-hinge mounts, making installation fast and easy. A shirt assembly is included with this SpeedDome Housing adapter kit to compensate for the smaller dimensions of the SpeedDome Ultra.

Product

Description

*Dome

Weight

Dimensions

Construction

Safety

Compatibility

(HxWxD)

Indoor Mounting Options

Page 4

AMERICAN DYNAMICS DOME MOUNTS

This mounting structure att

aches directly to a flat wall. When used with the RHOWCA corner bracket adapter or RHO

WPA pole strap adapter, this short wall mount can be

fixed to corners as well as poles. This mount’s compact design with mounting cover hides the mounting plate to pro

vide a clean and aesthetically pleasing appearance.

This mount positions the dome a

way from the wall,

enabling it to see o

ver awnings, soffits and landscaping. This mounting structure attaches directly to a flat wall. When used with the RHO

WCA corner bracket adapter or

RHO

WPA pole strap adapter, this long wall mount can be affixed to corners as well as poles. This mount’s compact design with mounting co

ver hides the mounting plate to

pro

vide a clean and aesthetically pleasing appearance.

This adap

ter bracket enables the long and short wall mounts (RHOSW and RHOLW) to affix to outside corners. Its powder coated aluminum construction ensures an extremely stur

dy installation.

This adapter bracke

t enables the long and short wall

mounts (RHOSW and RHOLW) to af

fix to outside corners.

This option contains st

ainless steel straps that can be daisy chained to accommodate any size pole. The kit also includes all the necessary mounting hardware. Its po

wder coated aluminum construction ensures an extremely sturdy installation.

(10 feet) in length.

This mount affixes directly to any vertical roof wall or parapet. This mount positions the dome away from the wall, enabling it to see over awnings, soffits and landscaping. Its opposing wing brackets ensure a secure installation to the roof surface, while allowing the pole to be repositioned for easy service access.

This adapter enables the RHOTR over-the-roof mount to be installed on horizontal and vertical roof/parapet surfaces. Multiple fastening positions ensure versatility for mounting on any combination of surfaces and angles.

This mounting assembly allows existing outdoor installations containing any SpeedDome wall, pole, corner, or over-the-roof mount to be retrofitted to accommodate newer outdoor dome/housings. The assembly’s modular design allows an installer to mount the housing to the end cap on the ground, before affixing the housing/end cap assembly to the mounting pole; this ensures a safe and easy installation.

SpeedDome Ultra Series SpeedDome Op

tima

SpeedDome Ultra Series SpeedDome Op

tima

SpeedDome Ultra Series SpeedDome Optima

.3 kg

(3 lbs)

1.7 kg

(3.9 lbs)

.79 kg

(1.75 lbs)

.5 kg

(1.

1 lbs)

1.8 kg

(4.0 lbs)

5.7 kg

(12.7 lbs)

2.59 kg

(5.75 lbs)

.32 kg

(.70 lbs)

With dome inst

alled

366 x 218 x 282 mm

(14 x 9 x 11 in)

With dome installed 366 x 218 x 587 mm

(14 x 9 x 23 in)

185 x 210 x 125 mm

(7 x 8 x 5 in)

138 x 79 x 27 mm

(5 x 3 x 1 in) Straps support 53 to 951 mm

(2 to 38 in)

pole diameter

115 x 120 x 120 mm

(4.5 x 5 x 5 in)

1098 x 243 x 473 mm

(43 x 10 x 19 in)

369 x 240 x 240 mm

(15 x 10 x 10 in)

64 x 103 x 194 mm

(3 x 4 x 8 in)

wder coated

aluminum, ABS

plastic, and f

iber

illed PVC

Powder coated

aluminum, ABS

plastic, and f

iber

filled PVC

wder coated

aluminum

Powder coated

aluminum and

stainless steel

Powder coated

aluminum and 

ABS plastic

Powder coated

aluminum, 

stainless steel, ABS

plastic, and fiber 

filled PVC

Powder coated

aluminum

Fiber filled PVC

RHOSW

Short Wall Mount with End Cap Assembly

RHOLW

Long Wall Mount with End Cap Assembly

RHOWCA

Corner Bracket Adapter

RHOWPA

Pole Strap Adapter

RHOPN

Outdoor Pendant Mount

RHOTR

Over-The-Roof

Mount with  End Cap Assembly

OTRF

Floor Adaptor for RHOTR

ROENDC

End Cap Assembly

Product

Description

*Dome

Weight

Dimensions

Construction

Safety

Compatibility

(HxWxD)

Outdoor Mounting Options

Product specifications and availability subject to change without notice. Certain product names mentioned herein may be trade names and/or registered trademarks of other companies.

VS233-03 08/04 L