•
Integral 22x optical zoom (11x digital) and 470 lines
horizontal resolution provide a quality, high-resolution
picture.
•
Advanced third generation Digital Signal Processing
(DSP) CCD camera delivers sharp, detailed images.
•
Zoom Adjusted Program (ZAP) automatically adjusts pan
and tilt speeds in proportion to zoom position, even at
22x magnification.
•
Automatic white balance allows the camera to
automatically adjust the white balance of the image,
providing optimal image quality.
•
The automatic focus provides clear images without the
need for manual adjustments.
•
The auto iris provides visible scenes without the user
having to manually compensate for diverse lighting
conditions.
•
The dome’s endcap or flying lead connection method
makes the dome easy to install and service – as little as
15 minutes from box-to-ceiling.
•
The dome is available in both indoor and outdoor
versions.
•
The dome supports up to 96 user-definable presets and
three user-definable patterns.
•
Unshielded Twisted Pair (UTP) wiring video transmission
enabled as standard saves on wiring and installation
costs.
•
The dome incorporates an automatic flip feature. This
feature enables the dome to automatically turn 180°
when the camera tilts to its lower limits and stays in that
position for a brief speed-proportional delay.
•
Vertical sync phase adjustment is provided to help
compensate for different phases of power when line-lock
is enabled, making it ideal for single and multi-phase
power installations.
•
Surge protection.
•
Alarms are processed externally by the controller, and can
automatically call a preset, run a pattern, or activate an
auxiliary output when the alarm is activated.
•
The dome contains a series of diagnostic LEDs for power,
communication, network type and failure mode.
•
The fully isolated power supply helps eliminate ground
loops.
•
Sensing of 50/60 Hz line is automatic and does not require
manual adjustment.
•
Allows daisy chain configuration of control wiring.
– For RS-422/RS-485: 10 domes at a maximum distance of
1 km (3,000 ft) on two 22 AWG shielded twisted pairs
(STP).
– For SensorNet: 32 devices at a maximum distance of
1 km (3,000 ft) on one 22 AWG unshielded twisted pair
(UTP).
– For Manchester: 3 domes at a maximum distance of
1.5 km (5,000 ft) on one 18 AWG shielded twisted pair
(STP).
•
Selectable (on/off) home position.
Two Housing Options
The integral housing model, which is constructed of ABS
plastic, is suitable for both indoor and outdoor applications.
This model incorporates a flying lead connection for
mechanical and electrical cabling. The outdoor version of the
integral housing model is weather and tamper-proof, and
contains a heater/blower that protects the dome. In extreme
temperatures, the housing’s built-in fan prevents the dome
from overheating, and the built-in thermostat and heater
prevent ice from forming on the outside bubble.
The in-ceiling model is designed with an integrated
aluminum top hat enclosure and plenum cap with swing-out
tabs that grasp ceiling material, ensuring a secure and easy
installation. This model utilizes a endcap connection for
mechanical and electrical cabling. The in-ceiling model is for
indoor applications only.