American Dynamics IPT05-B29-BNDA3 Specsheet

Security | Access | Video | Intrusion | Cloud

Tyco Illustra Pro 5MP Thermal EST Camera
Elevated Skin Temperature Scanning Solution

Data Sheet

Key Features

• Dual Image Sensor with
thermal detector

• Up to 5MP resolution 2592 x 1944
with visible camera, 384 x 288
resolution with thermal camera

• True day / night

• Built in IR and white light illuminator

• True WDR, up to 120dB

• Smart facial temperature detection

• Alarm trigger by temperature anomaly

• High accuracy with blackbody
calibration to ±0.2°C (±0.4°F)
in Single Face usage mode

• Customizable sound-light alarm

• 1-CH audio input; 1-CH built-in speaker

• PoE or 12VDC powered

• IP66 rating for outdoor application

• NDAA Compliant

What is the Smart Temperature Scanning Solution?

Johnson Controls smart elevated skin temperature scanning solution
comprises of a dual sensor, one Thermal the other Color, camera
and a temperature calibration device known as a Blackbody.

Using advanced face detection technology and in conjunction with
the dual sensors, the camera will measure the temperature of a person’s
forehead whilst the blackbody provides the constant temperature
reference point. Should someone in the field of view be detected with
a skin temperature above a predetermined level, an operator can be
alerted to this fact through a variety of possible methods ranging from
alerts in the VMS, events in a Access Control system, via a connected
light/sounder to the camera, or even through a web browser connection.

The International Electrotechnical Commision (IEC) standards for the basic safety and essential performance of screening thermographs
for human febrile temperature screening are at the heart of the development of the Johnson Controls smart elevated skin temperature
scanning solution, tested by UL for accuracy, drift, stability and uniformity of the IEC 80601-2-59:2017 standard. High accuracy brings with
it the benefit of reducing false alarms to a minimum, which in turn results in fewer disruptions and increased flow of staff and visitors.

Contactless and Accurate

Complying with the U.S. Food & Drug Administration’s COVID-19 Enforcement Policy criteria released in April 2020, the The Tyco Illustra
Pro Thermal EST Camera, being contactless and therefore non-invasive, is ideal for deployment at controlled entrances to areas and
facilities where initial skin temperature measurement is needed for staff and visitors. With ±0.2°C (±0.4°F) accuracy tolerance at an
effective distance of 1~2 meters (3.3~6.6 feet), this elevated skin temperature scanning solution provides a high degree of flexibility to
meet the individual situational awareness requirements of a wide variety of installations.

Specifications

Dual imager camera

Thermal camera

Detector type Amorphous-silicon Bolometers
Pixel pitch
Infrared spectral range 8~14μm
Effective pixels 384 × 288
Noise equivalent temperature difference <35mK
Thermal response time ≈40ms
Lens type Fixed
Focal length 12mm @ F1.0
Field of view Horizontal 29.7°, Vertical 22.5°

Visible camera

Imager 1 / 2.7" 5MP Progressive CMOS
Effective pixels 2592 x 1944

Minimum illumination

Shutter speed 1/30 s ~ 1 / 10,0000 s
S/N ratio ≥52 dB
Lens type Fixed
Focal length 8mm
Field of view Horizontal 38°, Vertical 27.5°
Lens mount M12

Color 0.012 Lux @ F2.0

B/W 0.0012 Lux @ F2.0, 0 Lux with IR

Video

Video compression H.264 / H.265 / MJPEG
H.264 Compression standard Base Line / Main Profile / High Profile
H.265 Compression standard Main Profile @ Level 4.1 High Tier

5MP (2592x1944), 4MP (2592×1520), 2560x1440, 3MP (2304×1296), 1080P (1920×1080),

Resolution

Maximum frame rate Visible: 30 fps @ all resolution. Thermal: 30 fps @ 704x576 (Upscaled)

720P (1280×720), D1 (720x576), 480x240, CIF (352x240)

704x576 (Upscaled from 384x288)

17μm

Visible

Thermal

Video bit rate 64 Kbps ~ 5 Mbps
Multiple streaming Triple stream

Visible

Main stream

Second stream

Third stream

Bitrate control VBR / CBR
Quality control 5 levels under VBR; Freely adjustable under CBR
Image setting ROI, Saturation, Brightness, Chroma, Contrast, Wide Dynamic, Sharpen, NR

2592x1944, 2592x1520, 2304x1296, 1920x1080, 1280x720

Thermal

704x576 (Upscaled from 384x288)

Visible

1280x720, 704x480, 352x240

Visible

704x576, 480x240, 352x288

Audio

Audio communication 1-CH audio input; 1-CH built-in speaker
Audio compression format G .711A, G.711U
Audio bit rate 128 Kbps

Operational

Day and night True Day/Night with Auto IR Cut Filter
Backlight compensation BLC/HLC
Wide dynamic range True WDR, 120dB
Effective ir distance 20 metres (65.6 feet)
Digital noise reduction 2D/3D DNR
Digital zoom Yes
Video privacy 4 zones video mask
Smart codec 8 zones ROI
Display mode Visible only, Picture-in-picture, Dual Window

Visible Camera

Line crossing direction, Object Abandoned / Removed,

Intelligent video analytics

Alarm triggers Alarm in, Intelligent video analytics, Network disconnect, SD card full, SD card error
Backfilling iAPI3

Enter an area, Motion detection

Thermal Camera

Elevated Skin Temperature Detection

Temperature detection

Detection mode Multiple point forehead skin temperature detection
Detection preset Single Face (in accordance with IEC standards) *
Effective distance 1~2M (3.3 ~ 6.6 feet) in Single Face usage mode
Temperature alarm Over temperature / Temperature anomaly
Response time Less than 50ms
Calibration Automatic calibration with blackbody
Accuracy ±0.2°C (±0.4°F) in Single Face usage mode with blackbody calibration

Network

Network protocol TCP / IP, UDP, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, FTP, SNMP, UPnP, Unicast, Multicast
Cyber security HTTPS / IP Filter / IEEE 802.1X / Firewall / account security
Online connection Support simultaneous monitoring for up to 10 users
API ONVIF, iAPI3

Interface

Network RJ45
Audio 1-CH audio input; 1-CH built-in speaker
Alarm Alarm in/out, Built-in sound-light alarm, Customizable voice alarm
Hardware reset Supported

Environmental

Operating temperature 0°C ~ 35°C (32°F ~ 95°F)
Operating humidity 10% ~ 90% relative humidity
Ingress protection IP66

General

Power supply DC12V / PoE

Power consumption <9W
Dimensions (LxWxH) 10.94 inches (278mm) x 3.78 inches (96mm) x 3.50 inches (89mm)
Net weight 2.6lbs, 1.2Kg
Installation Wall mounting, Ceiling mounting, Tripod mounting
Certification Certification testing is pending for major markets, including North America and the European Union.

Dimensions

95. 9 mm

3.78 in

3.72 in

94. 4 mm

3.50 in

88. 9 mm

8.27 in

5.12 in 4.33 in

Blackbody

Blackbody Calibrator

Temperature range 20.0°C to 70.0°C (68°F to 158°F)
Emissive area 100mm x 100mm
Display resolution 0.01°C (0.0018°F)
Radiance temperature

expanded uncertainty
Stability ± 0.05°C (± 0.09°F)

Emissivity ratio 0.96
Power supply 120 - 240 VAC compatible 50/60 Hz
Net weight 2kg (4.4lbs)
Calibration certificate 24 months from manufacturing

± 0.25°C between 33°C and 40°C

(± 0.45°F between 91.4°F and 104°F)

277 .6 mm

10.93 in

262 .8 mm

10.35 in

Ordering Information

Model Description

IPT05-B29-BNDA3

Dual imager temperature detection camera, Visible/Thermal, 5MP/384*288, 8mm/12mm, 20M IR, sound-light alarm,
Alarm/Audio, Micro SD, DC/PoE, IP66, 110V Blackbody calibration device included

Accessories

Model Description

IATR-ISTR Tyco Illustra Pro Thermal EST Camera or Black Body Tripod Mount - 1/4”-20

IBJB-TIS-WB-A Tyco Illustra Pro Thermal EST Back Box Mount

IBJB-TIS-WB-B Tyco Illustra Pro Thermal EST Back Box With Side Conduit Opening

IBPN-TIS-WB

IBPM-TIS-0

IBCM-TIS-0

Important Notice: Elevated body temperatures identified by the Tyco Illustra Pro Thermal EST should be confirmed with secondary evaluation
methods, such as contact thermometers. Temperature measurements should not be solely or primarily relied upon to diagnose or exclude a diagnosis
of COVID-19, or any other disease. The Tyco Illustra Pro Thermal EST does not cause and cannot eliminate or prevent occurrences of the events that it
is intended to detect or avert. This product is not intended to diagnose or monitor any medical condition or illness and should not be used as such. The
product is supplied as a first-line filter for organisations that wish to identify those entering premises who may have an elevated body temperature. It is
then for the organisation to determine how that information is used, and the appropriate reaction to that information. Competent medical advice should
be sought if there are concerns around illness, and further checks will be required.

Tyco Illustra Pro Thermal EST Ceiling Pendant Mount
(Requires a Back Box IBJB-TIS-WB-A or IBJB-TIS-WB-B)

Tyco Illustra Pro Thermal EST Pole Mounting Box with Straps
(Requires a Back Box IBJB-TIS-WB-A or IBJB-TIS-WB-B)

Tyco Illustra Pro Thermal EST Corner Mount
(Requires a Back Box IBJB-TIS-WB-A or IBJB-TIS-WB-B)

About Johnson Controls

Johnson Controls is a global diversified technology and multi-industrial leader serving a wide range of customers

in more than 150 countries. Our 120,000 employees create intelligent buildings, efficient energy solutions, integrated

infrastructure and next generation transportation systems that work seamlessly together to deliver on the promise

of smart cities and communities. Our commitment to sustainability dates back to our roots in 1885, with the invention

of the first electric room thermostat.

For additional information, please visit www.illustracameras.com or follow Illustra on LinkedIn, Twitter, and Facebook.

© 2020 Johnson Controls. All rights reserved. Product offerings and specifications are
subject to change without notice. Actual products may vary from photos. Not all products
include all features. Availability varies by region; contact your sales representative.

IL0106-DS-202005-R01-A4-EN