Page 1
Indoor and Outdoor
Dome Housing
Vandal Resistant
Indoor and Outdoor
Dome Housing
DATA SHEET
VideoEdge IP SpeedDome
Indoor and Outdoor Dome Housings
Features That Make a Difference:
Precision-crafted bubbles maintain the integrity of light and image
Reinforced high impact design with vandal resistant option
Four alarm inputs, one output
Surge and lightning protection of video, data, alarm input and
output, and power
Plug and play connectors enable easy servicing of environmental
board
Ceiling, pole, roof, wall, and corner mounts available
OUTDOOR HOUSING-SPECIFIC FEATURES
Temperature-controlled interior environment
Automatic defog and defrost heater cycle modes
Thermostatically controlled heater and blower prevent excessive
buildup of ice and removes any that does accumulate in one hour
On-demand menu through the web interface displays housing
temperature and humidity
Meets IP66/NEMA 4 specifications
The VideoEdge IP SpeedDome indoor and outdoor
housings allow the IP Dome to be installed in virtually
any environment. The superior optics within the bubble
have been designed to maintain the integrity of light,
producing images that are optically correct.
The housings have been designed to provide maximum
protection to the internal camera in various conditions.
In extreme temperatures, the outdoor housing’s built-in
thermostatically controlled heater and blower prevent
excessive ice from forming on the outside bubble.
Both indoor and outdoor housings are constructed with a
reinforced fiberglass high impact polycarbonate material along
with a UV stabilized sun shade, trim ring, and top cover. The
bubble assembly is affixed to the top via tamper-proof screws.
For applications where vandalism is a concern, a vandal
resistant model is available which includes an aluminum
sunshield cover and a high impact bubble which meets
ANSI-87.1 impact safety standards. For additional
protection, a steel bubble cage is also provided.
The housings are equipped with four alarm inputs and one
alarm output and surge protection is provided to all video
and external lines. The housings are available with your
choice of a clear or smoked bubble and a variety of mounts
make it easy for you to install it in nearly any application.
An optional end cap assembly is ideal for cable interconnection.
Page 2
features
Outdoor Housings
Model Numbers
ADVESDHOC ............ Housing with Clear Bubble (ƒ0)
ADVESDHOS ............ Housing with Smoked Bubble (ƒ1.0)
ADVESDHOVRC .......... Vandal Resistant Housing with High
Impact Clear Bubble (ƒ0)
ADVESDHOVRS .......... Vandal Resistant Housing with High
Impact Smoked Bubble (ƒ1.0)
Electrical (for heater blower)
Input Voltage ............. 24 VAC @ 50/60 Hz, NEC Class 2,
Certified Limited Power Source
Design Tolerance..........20 to 30 VAC @ 50/60 Hz,
Power Consumption .......60W Max: 2.5A @ 24VAC
Surge Protection .......... Power Line TVS rated at 60V, 1.5 joules;
Gas discharge tube rated at 8/20 us
Impulse Discharge Current: 5kA
Environmental
Weatherproof Standard .....NEMA 4, IP66
Operating Temperature .....-40° to 50°C (-40° to 122°F)
Storage Temperature.......-10° to 50°C (14° to 122°F)
Humidity ................0% to 95% RH (noncondensing)
Mechanical
Height ..................32.1 cm (12.5 in)
Diameter ................24.4 cm (9.6 in))
Weight (ADVESDHOC, ADVESDHOS)
Without dome ...........2.22 kg (4.89 lbs)
With dome .............3.38 kg (7.45 lbs)
Weight (ADVESDHOVRC, ADVESDHOVRS),
Without dome ...........2.82 kg (6.21 lbs)
With dome .............3.98 kg (8.77 lbs)
Regulatory
Safety
US and Canada ......... UL 60950-1/CSA C22.2 No. 60950 and
UL50 (Type 4)
European Union .........EN60950 -1 and EN60529 IP 66 EMC
US ...................FCC Part 15 Class A
Canada................ICES-003/NMB-003 Class A
Europe ................EN55022 Class A, EN50130-4
Australia/New Zealand ....AS/NZS CISPR22 Class A
Maximum Distances from Power Source
Dome and housing to be connected to a Class 2 LPS, 24 VAC, 80 VA
power source (do not exceed maximum outdoor Class 2 ratings of 30
VAC, 100 VA).
18 AWG 16 AWG 14 AWG
Low Line Voltage
102/204 VAC 60 m (200 ft) 100 m (320 ft) 160 m (520 ft)
Low Line Voltage
90/180 VAC 30 m (100 ft) 50 m (160 ft) 80 m (260 ft)
ADSPOT Features and Specifications
• Single Position Outdoor Power Supply
• Supports both 120 VAC and 230
VAC
• Small, compact design
• Weatherproof design: NEMA 4 and
IP66 rated
• Euro-style terminal blocks for quick
and simple installation
Mechanical
Dimensions (H x W x D)..... 75 x 125 x 75 mm (6.9 x 4.9 x 3.0 in)
Weight..................3.7 kg (8.2 lbs)
Enclosure Material .........Impact-resistant polycarbonate
Color ...................Light gray
Wall Mounting Options .....Concrete, wood or sheet rock
Mounting Area (H x W) .....281 x 200 mm (11.1 x 7.9 in)
Cover Fasteners ..........Four captive screws
Cable Access Knockouts ... Eight 21 mm or 15.5 mm (0.83 in or 0.61 in)
Four 29 mm or 23 mm (1.14 in or 0.91 in)
Electrical
Power Source . . . . . . . . . . . . 100-120 VAC or 200-240 VAC @ 50/60 Hz
Operational Limits .........90-135 VAC or 180-265 VAC @ 50/60 Hz
Input Current .............1.0 A/0.5 A
Output..................4 VAC, 2.5 A max.
UL Listed Class 2
Certified Limited Power Source
Environmental
Weatherproof Standard .....NEMA 4, IP66
Operating Temperature .....-40° to 50°C (-40° to 122°F)
Storage Temperature ......-40° to 50°C (-40° to 122°F)
Humidity ................0% to 95% RH (noncondensing)
Regulatory
Safety .................. UL 60950
CSA C22.2 No. 60950
EN60950
IEC 60950
Indoor Housings
Model Numbers
ADVESDHIC .............Indoor Housing with Clear Bubble (ƒ0)
ADVESDHIS ............. Indoor Housing with Smoked Bubble (ƒ0)
ADVESDHICVR ........... Indoor Vandal Resistant Housing with
High Impact Clear Bubble (ƒ0)
ADVESDHISVR ........... Indoor Vandal Resistant Housing with
High Impact Smoked Bubble (ƒ1.0)
Environmental
Operating Temperature .....-10°C to 50°C (14°F to 122°F)
Storage Temperature.......-10°C to 50°C (14°F to 122°F)
Humidity ................0% to 95% RH (noncondensing)
Mechanical
Height ..................32.1 cm (12.5 in)
Diameter ................24.4 cm (9.6 in))
Weight (ADVESDHIC, ADVESDHIS)
Without dome ...........1.7 kg (3.75 lbs)
With dome .............2.86 kg (6.3 lbs))
Weight (ADVESDHICVR, ADVESDHISVR)
Without dome ...........2.3 kg (5.07 lbs)
With dome .............3.46 kg (7.63 lbs)
Regulatory
Safety
US and Canada ......... UL 60950-1/CSA C22.2 No. 60950
European Union .........EN60950 -1
ADVESDHRDCLGC, ADVESDHRDCLGS
Features and Specifications
Ceiling mounts used to mount the American Dynamics VideoEdge IP
SpeedDome to 2x2 suspended ceilings or tile ceilings. For installations
in a 2’x2’ drop tile ceiling also order RH2x2.
ADVESDBASE Features and Specifications
Ceiling mount used to install an American Dynamics VideoEdge IP
SpeedDome to a ceiling, a 3x3 (RHIU3x3) or 4x4 (RHIU4x4) electrical
box, or in conjunction with wall/corner mounts (ADSDICM), 2x2 tile
pendant mounts (RHIU2x2P), indoor pendant mount (RHOPN), I-Beam
Mount (RHIUIBM). The mount makes PoE installation easy.
Page 3
mounts and accessories
Mounting Options
Mount
Description Construction Dimensions Weight
RHOSW:
Short Wall
Mount with
End Cap
Assembly
RHOLW:
Long Wall
Mount
with End Cap
Assembly
RHOPN:
Outdoor
Pendant
Mount
RHOTR:
Over-the-Roof
Mount with
End Cap
Assembly
Adapter Description Construction Dimensions Weight
RHOWCA:
Corner
Bracket
Adapter
This mounting structure attaches directly to a flat wall.
When used with the RHOWCA corner bracket adapter or
RHOWPA pole strap adapter it can be affixed to corners as well
as poles. A mounting cover conceals the mounting plate for a
more attractive appearance
This mount attaches directly to a flat wall, positioning the dome
away from the wall, so that it can see over furniture, shelving and
displays. When used with the RHOWCA corner bracket adapter
or RHOWPA pole strap adapter it can be affixed to corners as
well as poles. A mounting cover conceals the mounting plate for a
more attractive appearance.
This mount suspends an outdoor dome housing from an outdoor
ceiling or horizontal surface. It can be installed using either new
or existing 1.25’’ NPT threaded pipe or rigid conduit up to
10 feet (3 meters) in length.
This mount affixes directly to any wall, rooftop wall or parapet,
positioning the dome away from the wall, so that it can see over
awnings, soffits and landscaping. Opposing wing brackets secure
installation to the roof surface, while allowing the pole to be
repositioned for easy service access.
Adapter Options
This adapter attaches the long and short wall mounts (RHOSW
& RHOLW) to affix to outside corners. Powder-coated aluminum
construction ensures an extremely sturdy installation.
Powder-coated
aluminum, ABS
plastic and
fiber-filled PVC
Powder-coated
aluminum, ABS
plastic and
fiber-filled PVC
Powder-coated
aluminum, ABS
plastic
Powder-coated
aluminum, ABS
plastic and
fiber-filled PVC
Powder-coated
aluminum
With dome installed
366 x 218 x 282 mm
(14 x 9 x 11 in)
With dome installed
366 x 218 x 587 mm
(14 x 9 x 23 in )
115 x 120 x 120 mm
(4.5 x 5 x 5 in)
1098 x 243 x 473
mm
(43 x 10 x 19 in)
185 x 210 x 125 mm
(7 x 8 x 5 in)
1.3 kg
(3 lbs)
1.7 kg
(3.9 lbs)
1.8 kg
(4 lbs)
5.7 kg
(12.7 lbs)
.79 kg
(1.75 lbs)
RHOWPA:
Pole Strap
Adapter
ROTRF:
Floor Adapter
for RHOTR
ROENDC:
End Cap
Assembly
RHIUIBM:
Indoor I-beam
Clamp
Assembly
Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features.
Availability varies by region; contact your sales representative. Certain product names mentioned herein may be trade names and/or registered
trademarks of other companies.
© 2010 Tyco International Ltd. and its respective companies. All rights reserved. AD0158-DS-201002-R01-A4-EN
This adapter attaches the long and short wall mounts (RHOSW &
RHOLW) to outside corners. This kit contains stainless steel straps
that can be daisy-chained to accommodate any size pole and all
the necessary mounting hardware.
This adapter installs the RHOTR over-the-roof mount on
horizontal and vertical roof/parapet surfaces. Multiple fastening
positions provide versatility for mounting on any combination of
surfaces and angles.
This mounting assembly retrofits any existing outdoor SpeedDome
wall, pole, corner, or over-the-roof mount to accommodate newer
outdoor housings. A modular design lets you mount the housing
to the end cap on the ground, before installing it on the mounting
pole, making the process safe and easy.
This assembly allows the dome to be suspended from an I-beam;
and includes a clamp, pipe tee nipple and flange. The clamp
attaches to a 1.25” pipe, provided by the customer, then affixes
to the pendant hardware. The housing or dome assembly also
mounts to the structure.
Powder-coated
aluminum and
stainless steel
Powder-coated
aluminum
Fiber-filled PVC
Steel and
Galvanized steel
www.americandynamics.net
138 x 79 x 27 mm
(5 x 3 x 1 in)
Straps support
53 to 951 mm
(2 to 30 in)
pole diameter
369 x 240 x 240 mm
(15 x 10 x 10 in)
64 x 103 x 194 mm
(3 x 4 x 8 in)
N/A
.5 kg
(1.1 lbs)
2.59 kg
(5.75 lbs)
.32 kg
(.7 lbs)
2.9 kg
(6.4lbs)
Loading...