American Dryer Corp UD-80 User Manual

UD-80 Parts Manual

24 VAC Phase 5

1993/1994

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

T elephone: [phone] / Fax: [phone]

E-mail: [e-mail]

www.amdry.com

ADC Part No. 450134

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this

product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONL Y qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's

manual included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline
or other flammable vapors
and liquids in the vicinity of
this or any other appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. The manufacturer
reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors,
and material, and to change or discontinue models. The illustrations included in this manual may not depict your
particular dryer exactly .

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.

IMPORTANT

For your convenience, log the following information:

DATE OF PURCHASE __________________________________________________ MODEL NO. _________________

RESELLER’S NAME _______________________________________________________________________________

UD-80

Serial Number(s) _________________________________________________________________________________

________________________________________________________________________________________________

________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory . When ordering replacement parts from
the factory , you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts
Department at [phone]. Please specify the dryer model number and serial number in addition to the
description and part number, so that your order is processed accurately and promptly.

IMPORTANT NOTE TO PURCHASER

Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These instructions
must be posted in a prominent location near the dryer .

Table of Contents

High Security Control Door Assembly.................................................................................... 2

Lint Drawer/Door Assembly................................................................................................... 3

Lint Drawer/Lint Coop Assembly ........................................................................................... 4

Lint Drawer Switch Assembly ................................................................................................ 5

Phase 5 OPL Microprocessor Control Panel Assembly ......................................................... 6

Phase 5 OPL Microprocessor Control Box Assembly ............................................................ 7

Front Panel Assembly ........................................................................................................... 8

Main Door Switch Housing .................................................................................................... 9

Main Door Assembly ........................................................................................................... 10

Tumbler/Support Assemblies............................................................................................... 11

Tumbler Bearing Assembly............................................................................................ 12, 13

Idler Bearing Assembly.................................................................................................. 14, 15

Reversing T otally Enclosed, Fan-Cooled (T.E.F .C.) Motor Mount Assembly .................... 16, 17

UDG-80 Direct Sp ark Ignition (DSI) Upshot Burner Assembly ........................................ 18, 19

UDS-80 Air Operated Steam Damper Assembly........................................................... 20, 21

Sensor Bracket Assembly ................................................................................................... 22

Sail Switch Assembly .......................................................................................................... 23

Microprocessor Reversing Rear Control Box Assembly....................................................... 24

T op/Back Guard Assemblies ............................................................................................... 25

Additional Parts Available ................................................................................................... 26

High Security Control Door Assembly

Illus. No. Part No. Qty. Description

1 160017 1 Special Dummy Lock ONL Y
2 160016 1 Lock Cam ONLY
3 112312* 1 UniDryer® Logo ONLY

881053* 1 ADC Logo with Tape (for ALL Coin Models Only)
881052* 1 Metal ADC Logo with Tape (for ALL OPL Models Only)
870011 1 Logo Double Tape Kit ONLY

4 800020** 1 High Security Control Door Assembly

(includes illus. nos. 4 through 7)

800144 1 Stainless Steel High Security Control Door Assembly

(includes illus. nos. 4 through 7)
5 180202 1 Top Trim Strip with Lock Hole (38-1/4 length)
6 102307 3 Trim Bumper Gasket (sold by the foot)
7 150201 6 #10-32 x 1/4” Phillips Round Head Machine Screw
8 150300 4 #10 x 1/2” Hex Washer TEK Screw
9 102600 1 Control Door Rod Support Catch
10 102601 1 Control Door Rod Retainer Clip
1 1 102502 1 Control Door Support Rod
12 122116 1 Switch 24 VAC

(for models mfd. as of May 5, 1993)
13 323635 1 Switch Box Cover

(for models mfd. as of May 5, 1993)
14 150300 1 #16 x 1/2” Hex Washer TEK Screw

(for models mfd. prior to May 5, 1993)

* Logo tape kit is not included and must be ordered separately.
** Specify color when ordering.

2 American Dryer Corp. 450134-7

Lint Drawer/Door Assembly

Illus. No. Part No. Qty. Description

1* 880826 1 Lint Door Assembly

(includes illus. nos. 1 and 3 through 5)
2* 880840 1 Lint Drawer Assembly
3 150201 6 #10-32 x 1/4” Phillips TEK Screw
4 102307 3 Trim Bumper Gasket
5 180212 1 Mid Trim Kick Plate
6 117604 6 Neoprene Sponge Tape (sold by the foot)
7 150309 6 #10-16 x 1/2” Hex Head TEK Crimptite Screw

* Specify color when ordering.

450134-7 www.amdry.com 3

Lint Drawer/Lint Coop Assembly

Illus. No. Part No. Qty. Description

1 881017 1 Lint Back Cover
2 881018 1 Felt Stiffener
3 881019 1 Felt Retainer
4 881020 1 Wrapper Middle Support
5 115993 1 Lint Drawer Felt
6 154200 4 5/32” Pop Rivet
7 881021 1 Right Side Lint W all
8 150300 5 #10 x 1/2” Hex Washer TEK Screw
9 323626 1 Temperature Sensor Bracket ONLY

(refer to Sensor Bracket Assembly on page 22)

10 121405 1 Large Rubber Grommet Only
1 1 881022 1 Middle Side Lint Wall
12 802163 1 Left Side Lint W all
13 150300 5 #10 x 1/2” Hex Washer TEK Screw
14 154200 4 5/32” Pop Rivet

4 American Dryer Corp. 450134-7

Lint Drawer Switch Assembly

Illus. No. Part No. Qty. Description

1 323635 1 Lint Drawer Switch Cover
2 122116 1 Lint Drawer Switch
3 151001 2 #8-32 Pal Nut
4 121405 1 Large Rubber Grommet

450134-7 www.amdry.com 5

Phase 5 OPL Micr opr ocessor Contr ol Panel Assembly

Illus. No. Part No. Qty. Description

1 112535 1 O PL English Keyboard Label Assembly

112276 1 OPL Stick-on Labels (English Only) ... Not Illustrated
112275 1 OPL Stick-on Labels

(Spanish, Italian, and Hebrew) ... Not Illustrated

112277 1 3-Language OPL Stick-on Labels

(English, Spanish and Hebrew) ... Not Illustrated

112278 1 5-Language OPL Stick-on Labels

(Italian, Dutch, French, German and Chinese) ... Not Illustrated

2 801255 1 Phase 5 Microprocessor Control Panel ONLY

801256 1 Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
801207 1 Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete

(includes illus. nos. 1 through 6)

824459 1 Phase 5 OPL Reversing Microprocessor Control Panel Assembly

with Battery Option Complete
(includes illus. nos. 1 though 6)

3 137231 1 Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY

824998 1 Phase 5 Battery Clip
4 153010 2 #6 S tar Washer
5 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
6 160005 1 Spring Turn Latch (2-piece)
7 136048 1 1/8-Amp Fuse ONLY

IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).

6 American Dryer Corp. 450134-7

Phase 5 OPL Micr opr ocessor Contr ol Box Assembly

Illus. No. Part No. Qty. Description

1 141403 1 24 VAC Transformer (for 60 Hz models Only)

132023 1 24 VAC Transformer (for 50 Hz models Only)
2 150300 2 #10 x 1/2” Hex Washer TEK Screw
3 120715 1 30-Position Terminal Block
4 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
5 151000 2 #6-32 Pal Nut
6 136057 * 1/2-Amp (Slo-Blo) Fuse ONL Y
7 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw
8 136008 * Fuse Block and Strip Only
9 122641 1 15-Pin Microprocessor Connector
10 122706 * Mate-N-Lock Socket

* As required.

450134-7 www.amdry.com 7

Fr ont Panel Assembly

Illus. No. Part No. Qty. Description

1 880817 1 Right Hand Insulated Front Panel Assembly Complete

(includes illus. nos. 1, 2 and 3)

880816 1 Left Hand Insulated Front Panel Assembly Complete

(includes illus. nos. 1, 2 and 3)
2 154215 2 5/32” x 1/4” Pop Rivet
3 170330 1 Friction Door Latch
4 150309 9 #10-16 x 1/2” Hex Head TEK Crimptite Screw
5 121405 1 Rubber Grommet

* Specify color when ordering.

8 American Dryer Corp. 450134-7

Main Door Switch Housing

Illus. No. Part No. Qty. Description

1 152013 2 #6-32 Hex Nut
2 153008 2 #6 Lock Washer
3 137005 1 Singe-Pole Door Switch ONLY
4 121028 2 Insulated Female T erminal
5 154281 2 3/8” Standard Nylon Spacer
6 800448 1 12-1/2” Stainless Steel Main Door Hinge Assembly

(includes illus. nos. 6 and 7)
7 153565 2 #6-32 x 1” Self Clinching Stud
8 313218 1 Main Door Switch Housing ONLY
9 150201 2 #10-32 x 1/4” Phillips Pan Head TEK Screw
10 121405 1 Rubber Grommet

450134-7 www.amdry.com 9

Main Door Assembly

Illus. No. Part No. Qty. Description

1 881421 1 Gray Plastic Main Door Assembly Complete with Mechanical Fasteners

(includes illus. nos. 1 and 5 through 9)
2 800448 4 12-1/2” Stainless Steel Main Door Hinge Assembly
3 150410 4 #10-24 x 3/8” Phillips Pan Head Taptite Screw
4 152014 1 1/4-20 Free Spin Wash Nut
5 102353 1 Main Door Gasket
6 102212 1 20-7/16” Door Glass with (4) Holes

170730 1 Main Door Glass Adhesive (10.3 oz. cartridge)
7 150448 4 1/2” Stainless Steel Flat Head Allen Screw
8 170319 4 Door Glass (Nylon) Spacer
9 150431 1 Main Door Latch Screw

(#10 x 7/16” Dome Hex Head)

10 American Dryer Corp. 450134-7

T umbler/Support Assemblies

Illus. No. Part No. Qty. Description

1 880818* 1 Tumbler ONLY without Felt Collar

(includes illus. nos. 1, 2, and 3)

880827 1 Reversing Tumbler and Support Assembly Complete

(includes illus. nos. 1 through 11)
2 154210 40 5/32” x 3/16” Pop Rivet
3 301308 4 Tumbler Rib ONL Y
4 150500 1 5/16-18 x 3/4” Socket Button Head Screw
5 100905 4 3/8-16 x 37 Tie Rod
6 153004 4 3/8” Flat Washer
7 800615 1 Reversing Tumbler Support ONLY
8 152005 4 3/8” Hex Nut
9 153005 4 3/8” Lock Washer
10 153004 4 3/8” Flat Washer
11 116000 1 Felt Collar ONLY

-- 401010 1 #847 Adhesive (5 oz. tube)

* Felt collar is not included and must be ordered separately.

450134-7 www.amdry.com 11

T umbler Bearing Assembly

12 American Dryer Corp. 450134-7

T umbler Bearing Assembly

Illus. No. Part No. Qty. Description

1 880220 1 1-3/4” Flange Bearing ONLY
2 153025 4 9/16” Lock Washer
3 152050 4 9/16-12 Hex Nut
4 150508 2 3/8-16 x 3/4” Hex Head Machine Bolt
5 153005 2 3/8” Lock Washer
6 152005 2 3/8-16 Hex Nut
7 150600 2 3/8-16 x 1-1/2” Hex Head Machine Bolt
8 153004 * 3/8” Flat Washer
9 153005 2 3/8” Lock Washer
10 152005 2 3/8-16 Hex Nut
1 1 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
12 153002 4 5/16” Lock Washer
13 153001 4 5/16” Flat Washer
14 150621 2 5/16-18 x 1-1/2” Hex Head Machine Bolt
15 152004 2 5/16-18 Hex Nut
16 8 0 11 0 1 1 1-3/8” Bearing Box Assembly Complete

(includes illus. nos. 4 through 20)

For models without Rotation Sensor Option

801103 1 1-3/8” Bearing Box and Support ONLY

(includes illus. nos. 4, 5, 6, 16, and 17)

801105 1 1-3/8” Bearing Box ONLY
17 8 0 1 1 04 1 Pillow Block Bearing Support ONLY
18 880779 1 1-3/8” Pillow Block Bearing Assembly with Magnet

(for models mfd. as of April 5, 1993)

880202 1 1-3/8” Pillow Block Bearing ONL Y

(for models mfd. as of April 5, 1993)
19 152004 2 5/16-18 Hex Nut
20 150610 2 5/16-18 x 1-1/2” Allen Setscrew
21 1 01 1 1 8 1 18-3/4” Pulley
22 10 1119 1 1-3/8” Taper Lock Hub (key not included)
23 154301 2 5/16-18 x 5/16” Allen Setscrew
24 100735 1 Shaft Key (for taper lock hub)
25 100106 1 5L-690 V-Belt (to idler assembly)
26 824807 1 Rotational Sensor Assembly

(for models mfd. as of April 5, 1993)

* As required.

450134-7 www.amdry.com 13

Idler Bearing Assembly

14 American Dryer Corp. 450134-7

Idler Bearing Assembly

Illus. No. Part No. Qty. Description

1 100106 1 5L-690 V -Belt (idler to tumbler)
2 1 011 4 0 1 14” x 3” Compound Pulley
3 100114 1 4L-630 V -Belt (idler to motor)
4 154301 2 5/16-18 x 5/16” Allen Setscrew
5 100705 1 3/16” x 3/16” x 1-3/8” Key
6 301850 1 5/8” x 3/4” Idler Shaft
7 152002 3 1/4-20 Hex Nut
8 153007 3 1/4” Lock Washer
9 100214 2 5/8” Flange Bearing
10 150521 3 1/4-20 x 2” Carriage Bolt
1 1 801007 1 Idler Bearing Assembly Complete

(includes illus. nos. 5 through 17)
12 150617 2 3/8-16 x 1” Hex Head Machine Bolt
13 153005 2 3/8” Lock Washer
14 153004 2 3/8” Flat Washer
15 801009 1 Idler Square Washer
16 152004 1 5/16-18 Hex Nut
17 150509 1 5/16-18 x 3” Hex Head Machine Bolt

450134-7 www.amdry.com 15

Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

16 American Dryer Corp. 450134-7

Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

Illus. No. Part No. Qty. Description

1 100114 1 4L-630 V -Belt (motor to idler)
2 100701 1 3/16” x 3/16” x 1” Key
3 1 0 11 3 0 1 5/8” x 2-1/2” Motor Pulley (for 60 Hz models Only)

10 11 3 9 1 5/8” x 2-3/4” Motor Pulley (for 50 Hz models Only)
4 120200 1 3/8” x 90° Connector
5 181003 1 1/2 hp 208/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor (56Z frame)
6 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
7 153002 4 5/16” Lock Washer
8 153001 4 5/16” Flat Washer
9* 100023 1 3 hp 220/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor

with 3/4” Shaft (56Z frame)
10 120200 1 3/8” x 90° Connector
1 1 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
12 153002 4 5/16” Lock Washer
13 153001 4 5/16” Flat Washer
14 154000 8 5/16” Tinnerman Nut
15 152004 7 5/16” Hex Nut
16 153002 7 5/16” Lock Washer
17 153001 7 5/16” Flat Washer
18 800920 1 Reversing Motor Mount ONLY (56Z frame)

803959 1 60 Hz Reversing T.E.F.C. Motor Mount Assembly Complete

(includes illus. nos. 2 through 14 and 18 through 24)

803964 1 50 Hz Reversing T.E.F.C. Motor Mount Assembly Complete

(includes illus. nos. 2 through 14 and 18 through 24)
19 117604 5 Neoprene Sponge Tape (sold by the foot)
20 153051 1 3/4” S.A.E. Flat Washer
21 100705 1 3/16” x 3/16” x 1-3/8” Key
22 100605 1 13” Impellor with 5/8” Bore
23 153050 ** 1/2” S.A.E. Flat Washer
24 152006 2 1/2-20 Left Hand Jam Nut

* Check part number on motor data label to verify correct motor.
** As required.

450134-7 www.amdry.com 17

UDG-80 Direct Spark Ignition (DSI) Upshot Burner Assembly

Illus. No. Part No. Qty. Description

1 150300 19 #10 x 1/2” Hex Washer TEK Screw
2 130401 1 330° Hi-Limit Thermostat ONLY
3 323643 1 Oven Top Cover
4 323641 1 Burner Front
5 323644 1 Oven Inlet Cover
6 140838* 2 #3 (Natural Gas) Burner Orifice

(for 60 Hz models mfd. as of August 20, 1992)

140840* 2 #1 (Natural Gas) Burner Orifice

(for 60 Hz models mfd. prior to August 20, 1992)

140819* 2 #30 (Liquid Propane Gas) Burner Orifice

(for 60 Hz models mfd. as of April 1, 1993)

140821* 2 #28 (Liquid Propane Gas) Burner Orifice

(for 60 Hz models mfd. prior to April 1, 1993)

140840* 2 #1 (Natural Gas) Burner Orifice

(for 50/60 Hz models mfd. as of August 20, 1992)

140821* 2 #28 (Liquid Propane Gas) Burner Orifice

(for 50/60 Hz models mfd. as of August 20, 1992)

140832* 1 #4 (Natural Gas) Burner Orifice

(for 50 Hz models mfd. as of August 20, 1992)

140834* 1 #5 (Natural Gas) Burner Orifice

(for 50 Hz models mfd. as of August 20, 1992)

140819* 1 #30 (Liquid Propane Gas) Burner Orifice

(for 50 Hz models mfd. as of August 20, 1992)

140818* 1 #31 (Liquid Propane Gas) Burner Orifice

(for 50 Hz models mfd. as of August 20, 1992)

18 American Dryer Corp. 450134-7

UDG-80 Direct Spark Ignition (DSI) Upshot Burner Assembly (continued)

Illus. No. Part No. Qty. Description

7 141247 1 1/2” 2-Port Swage Manifold

(for models mfd. as of August 20, 1992)

141246 1 1/2” 2-Port Manifold

(for models mfd. prior to August 20, 1992)
8 323642 1 Gas Valve Support Bracket

880822** 1 Gas V alve (Natural Gas) Manifold Assembly

(includes illus. nos. 7 through 15, 17, 18 and 29)

880823** 1 Gas V alve (Natural Gas) Manifold Assembly

(includes illus. nos. 7 through 15, 17, 18 and 29)
9 332119 1 1-3/8” Hole Pipe Bracket
10 128928 1 1/2” 24 VAC Redundant (Natural Gas) Gas Valve

(for models mfd. as of August 20, 1992)

881052 1 1/2” DSI (Liquid Propane Gas) Gas Valve Assembly
140411 1 1/2” 24 VAC Gas V alve (Liquid Propane Gas) Conversion Kit

(for models mfd. as of August 20, 1992)

140017 1 1” 24 VAC Redundant (Natural Gas) Gas V alve

(for models mfd. prior to August 20, 1992)

140018 1 1” 24 VAC Redundant (Liquid Propane Gas) Gas Valve

(for models mfd. prior to August 20, 1992)
1 1 142715 1 1/2” x 1/2” Nipple
12 142923 1 1” x 1/2” Reducing Elbow
13 142808 2 1” x 3” Nipple
14 142602 1 1” Black Union
15 318317 1 7/8” Hole Pipe Bracket
16 319712 1 Burner Hi-Limit Bracket
17 141302 1 1” Shutoff Valve
18 331291 1 1-1/8” Hole Pipe Bracket
19 121492 2 3/16” Nylon Clamp
20 880824** 1 UDG-80 Burner Assembly Complete (for

(includes illus. nos. 1 through 4, 16 and 23 through 28)

880824** 1 UDG-80 Burner Assembly Complete (for

(includes illus. nos. 1 through 4, 16 and 23 through 28)
21 150299 4 #10 x 1” Hex Washer TEK Screw
22 880815 1 ADC DSI (Direct Spark Ignition) Module ONLY (50/60 Hz)
23 141110 2 Burner Tube
24 323600 1 Manifold Retainer
25 323598 1 Burner Tube Holder
26 128915 1 Ignitor and Flame-Probe Assembly

305412 1 Ignitor Gap Feeler Gauge ... Not Illustrated
27 323599 1 Burner Side Cover
28 323594 1 Burner Louver (for

2 Burner Louver (for
29 150300 6 #10 x 1/2” Hex Washer TEK Screw
30 --------- – Sail Switch Assembly

(refer to Sail Switch Assembly on

--- 880777* 1 UDG-80 Liquid Propane Conversion Kit with Orifices

(for 60 Hz models mfd. as of August 20, 1992)

--- 880778* 1 UDG-80 Liquid Propane Conversion Kit with Orifices

(for 50 Hz models mfd. prior to August 20, 1992)

--- 880763* 1 UDG-80 Liquid Propane Conversion Kit with Orifice

(for models mfd. with the 1” Robershaw Gas Valve prior to August 20, 1992)

60 Hz models ONLY)
50 Hz models ONLY)

60 Hz models ONLY)
50 Hz models ONLY)

page 23)

* Consult factory for elevations over 2,000 feet.
** Burner orifice is not included and must be ordered separately.

450134-7 www.amdry.com 19

UDS-80 Air Operated S team Damper Assembly

20 American Dryer Corp. 450134-7

UDS-80 Air Operated S team Damper Assembly

Illus. No. Part No. Qty. Description

1 165009 1 UDS-80 Steam Coil
2 153002 6 5/16” Lock Washer
3 152004 6 5/16-18 Hex Nut
4 152002 4 1/4-20 Hex Nut
5 153007 4 1/4” Lock Washer
6 820321 2 UDS-80 Steam Damper Hinge Assembly ONLY
7 803415 1 UDS-80 Steam Damper Assembly

(includes illus. nos. 7, 10 and 11)
8 153007 4 1/4” Lock Washer
9 152002 4 1/4-20 Hex Nut
10 115995 108 Steam Damper Gasket (sold by the inch)
1 1 102350 1 Steam Damper Foam (68-1/2” length)
12 151007 1 7/16-20 Stainless Steel Acorn Nut
13 152007 1 7/16-20 Hex Nut
14 100497 1 1-1/4” Bore x 3” Stroke Piston
15 100492 1 Piston Support Bracket
16 152002 4 1/4-20 Hex Nut
17 153007 4 1/4” Lock Washer
18 100472 1 1/4” x 1/8” Connector
19 143110 1 1/4” Tubing (sold by the foot)
20 100470 1 1/4” x 1/8” Connector
21 100496 1 1/8” Needle Valve
22 143238 1 1/8” Close Nipple
23 100498 1 3-W ay Micro Valve – 24 VAC
24 150002 2 #6-32 x 1” Slotted Head Machine Screw
25 153010 2 #6 Star Washer
26 152000 1 #6-32 Hex Nut
27 330987 1 Micro Valve Support Bracket
28 152002 2 1/4-20 Hex Nut
29 153007 2 1/4” Lock Washer
30 100520 1 1/8” N.P.T. Silencer (muffler)

450134-7 www.amdry.com 21

Sensor Bracket Assembly

Illus. No. Part No. Qty. Description

1 880251 1 1/4” Temperature Sensor Probe Assembly

(includes illus. nos. 1 through 4)
2 122605 1 4-Pin Socket Connector ONLY
3 122701 4 Socket Terminal ONLY

122801 1 Pin/Socket Extraction T ool
4 154007 2 1/4” Tinnerman Push-on Fastener
5 150000 2 #6-32 x 1/4” Right Hand Machine Screw
6 802174 1 Sensor Bracket Assembly Complete

(includes illus. nos. 1 through 9)

323626 1 Temperature Sensor Bracket ONLY
7 130103 1 225° Large Automatic Thermostat
8 153010 2 #6 S tar Washer
9 152000 2 #6-32 Hex Nut
10 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
11 122604 1 4-Pin Connector ONLY
12 122700 4 Pin T erminal ONLY

22 American Dryer Corp. 450134-7

Sail Switch Assembly

Illus. No. Part No. Qty. Description

1 105500 1 Sail Switch Actuator Rod
2 319202 1 Sail Switch Damper (flat)
3 154002 1 1/8” Push-On Fastener
4 802800 1 Sail Switch Box with Cover and Bracket ONLY

802801 1 Sail Switch Box Assembly Complete

(includes illus. nos. 1 through 4 and 6 through 10)
5 150300 2 #10 x 1/2” Hex Washer TEK Screw
6 150303 2 #4 x 3 /4 ” Pan Head “A” Machine Screw
7 122200 1 Sail Switch ONL Y
8 802799 1 Sail Switch Box Cover and Bracket ONLY
9 150309 2 #10-16 x 1/4” Hex Head TEK Crimptite Screw
10 154004 1 Twin Speed Nut

450134-7 www.amdry.com 23

Micropr ocessor Reversing Rear Contr ol Box Assembly

Illus. No. Part No. Qty. Description

1 322812 1 Back Electrical Box Component Plate
2 137060 1 Arc Suppressor Board ONLY
3 137013 2 Nylon Standoff
4 132431 1 Reversing Contactor (208/230/240v , 50/60 Hz) – 24 VAC

132432 1 Reversing Contactor Replacement Coil (208/230/240v , 50/60 Hz) – 24 VAC
5 150103 2 #8-32 x 3/4” Phillips Round Head Machine Screw
6 151001 2 #8-32 Pal Nut
7 153002 1 5/16” Lock Washer
8 152004 1 5/16-18 Hex Nut
9 132445 1 3 hp Contactor ONLY
10 150103 2 #8-32 x 3/4” Phillips Round Head Machine Screw
1 1 151001 2 #8-32 Pal Nut
12 120701 1 4-Position T erminal Block
13 150008 2 #6-32 x 1-1/4” Slotted Round Head Machine Screw
14 151000 2 #6-32 Pal Nut
15 121300 3 Open and Close Bushing

--- 322809 1 Black Electrical Box Cover ... Not Illustrated

--- 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated

24 American Dryer Corp. 450134-7

Top/Back Guar d Assemblies

Illus. No. Part No. Qty. Description

1 312527 1 Outer Top Assembly (for Gas Models Only)
2 150301 8 #8-18 x 7/16” Phillips Pan Head TEK Screw
3 314510 1 Top Back Guard
4 150301 8 #8-18 x 7/16” Phillips Pan Head TEK Screw
5 322809 1 Rear Electrical Box Cover
6 150301 8 #8-18 x 7/16” Phillips Pan Head TEK Screw
7 314511 1 Lower Back Guard
8 150301 8 #8-18 x 7/16” Phillips Pan Head TEK Screw
9 103500 4 Adjustable Leveling Leg
10 880939 1 10” Damper Assembly (for Gas Models Only)

104005 1 12” Damper Assembly (for Steam Models Only)

1 1 112519 1 “Routine Maintenance Schedule” Label ONLY

450134-7 www.amdry.com 25

Part No. Description

112039 “Black/White/Green Ground” Label
112280 “Clean Lint Screen” Label
112534 “Phase 5 OPL Program Location Summary” Label
114001 “CAUTION – Exhausted/Lint Screen” Label
114006 “ WARNING – Fire Hazards” Label
120802 Red Butt Connector
120902 #74B Wire Nut
120903 Crimp-on Wire Nut
121006 #10 Insulated Ring T erminal
121014 1/4” Insulated (female) T erminal
121026 Tab Receptacle Combination
121499 5-1/2” Harness Tie
121500 8” Harness Tie
121503 Harness Tie Mounting Clip
122804 Manometer (Hydro Gauge) for measuring Gas Pressure
404500 Almond Brush-In-Cap Bottle T ouch-Up Paint
404502 White-Brush-In-Cap Bottle T ouch-Up
404506 Beige Brush-In-Cap Bottle Touch-Up Paint
404507 Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
880200 Electrical T erminal (assortment) Kit

Additional Parts Available

26 American Dryer Corp. 450134-7

Notes

450134-7 www.amdry.com 27

ADC Part No. 450134 7 - 12/27/05 - 0