American Dryer Corp SL50, SL75 User Manual

SL50 / SL75

Parts Manual

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: (508) 678-9000 / Fax: (508) 678-9447

E-mail: techsupport@amdry.com

www.amdry.com

ADC Part No. 450299-3

Ret ain This Manual

In A Safe Place For Future Reference

This product embodies advanced concepts in

engineering, design, and safety. If this product

is properly maintained, it will provide many years

of safe, efficient, and trouble free operation.

ONLY properly licensed technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment

or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted

near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. The manufacturer reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________________________________ MODEL NO. _____________

RESELLER’S NAME ________________________________________________________________________________

Serial Number(s) ____________________________________________________________________________________

___________________________________________________________________________________________________

Replacement parts can be obtained from your reseller

or the ADC factory. When ordering replacement parts from

the factory, you can FAX your order to ADC at (508) 678-9447

or telephone your order directly to the ADC Parts Department

at (508) 678-9000. Please specify the dryer model number

and serial number in addition to the description and part number,

so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict

your particular dryer exactly. The illustrations are a composite

of the various dryer models. Be sure to check the

descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer .

NOTES ____________________________________________________________________________

___________________________________________________________________________________

Parts Diagram

4 American Dryer Corporation 450299 -3

Illus. No. Part No. Qty. Description

1 851399 1 SL50 / SL75 Back Guard Assembly for Gas and Electric

(for models mfd. as of July 27, 2005)

2 851253 1 SL50 Left Side Panel Assembly

851345 1 SL75 Left Side Panel Assembly

3 851255 1 SL50 Right Side Panel Assembly

851343 1 SL75 Right Side Panel Assembly

4 851268 1 SL50 Top Panel Assembly

851367 1 SL75 Top Panel Assembly 5 153064 2 1/4-20 x 1/2” Socket Cap Screw 6 153072 2 1/4” High Collar Lock Washer 7 185426 1 Dual Screw Backup Washer 8 153048 2 Inner Friction Pad

354217 1 3/4” Plate Spacer … Not Illustrated

185240 1 Extended Tumbler Shaft … Not Illustrated 9 851372 2 Rear Wheel Bracket Assembly (for models without banded tumbler)

851562 2 Rear Wheel Bracket Assembly (for models with banded tumbler)

180060 1 3-1/2” Wheel ONLY 10 819295* 1 Large Lint Drawer Assembly (painted)

851380 1 Large Lint Drawer Assembly (stainless steel) 11 851557 1 SL50 Stainless Steel Tumbler with Band

851555 1 SL75 Stainless Steel Tumbler with Band

851374 1 SL50 Galvanized Tumbler

851376 1 SL75 Galvanized Tumbler 12 102410 1 SL50 / SL75 15 Rib Drive Belt

(for all SL75 and SL50 models mfd. as of February 3, 2006)

102409 1 SL50 12 Rib Drive Belt

(for SL50 models mfd. prior to February 3, 2006)

13 887190 1 SL50 / SL75 Non-Coin Mid Support Panel with Auto (black)

887146 1 SL50 / SL75 Non-Coin Mid Support Panel with Auto (white)

887147 1 SL50 / SL75 Non-Coin Mid Support Panel with Auto (stainless steel)

887121 1 SL50 / SL75 Coin Mid Support Panel (black)

887122 1 SL50 / SL75 Coin Mid Support Panel (white)

887123 1 SL50 / SL75 Coin Mid Support Panel (stainless steel) 14 851274* 1 Main Door Assembly Complete with Handle (painted)

851272 1 Main Door Assembly Complete with Handle (stainless steel)

103067 3 Door Hinge … Not Illustrated 15 170233* 1 Main Door Handle 16 818370 1 Rotation Sensor 17 851384 1 Coin Vault

122002 1 Coin Vault Switch … Not Illustrated 18 125916 1 Coin Box with 2 Keys (Note: each lock keyed different) 19 154061 4 Tinnerman U-Nut Retainer 20 183129 4 #10-32 x 1/2” T20 Truss Head 21 851371 2 Front Wheel Bracket Assembly (for models without banded tumbler)

851530 2 Front Wheel Bracket Assembly (for models with banded tumbler)

180060 1 3-1/2” Wheel ONLY 22 102397 1 SL50 / SL75 Door Gasket 23 131819 1 DPDT Reversing Relay 120V

131818 1 DPDT Reversing Relay 208-240V

Parts List

* Specify color when ordering.

450299-3 www.amdry.com 5

Parts Diagram

6 American Dryer Corporation 450299 -3

Illus. No. Part No. Qty. Description

1 851522 1 Phase 8 Coin Control Panel Assembly Complete

851518 1 Phase 8 Non-Coin Control Panel Assembly Complete

851521 1 Phase 8 Coin Control Panel (panel Only)

851517 1 Phase 8 Non-Coin Control Panel (panel Only) 2 185121* 1 Lower Panel (painted)

185122 1 Lower Panel (stainless steel) 3 160040 1 XX4451 Lock

160140 2 XX4451 Key

122200 1 Microswitch

160066 1 Offset Cam for Lock

154004 1 Twin Speed Nut 4 112587 1 Phase 8 Coin Keypad

112586 1 Phase 8 Non-Coin Keypad 5 818213 1 25¢ Coin Acceptor Assembly with Optic Switch

819264 1 Programmable Euro / UK Coin Acceptor

887041 1 Optic Switch ONLY (for 25¢ coin acceptor) 6 819508 1 Control Mount Assembly 7 887092 1 Phase 8 Microprocessor without Fire Suppression System

887093 1 Phase 8 Microprocessor with Fire Suppression System 8 350250 1 Computer Board Cover 9 350203 2 Strain Relief Door Guide Strip 10 350204 2 Strain Relief Cabinet Guide Strip 11 154220 4 Button Head Pop Rivet 12 150313 2 #10-16 x 5 TORX 13 819196 1 Main Door Switch Assembly

813411 1 Door Switch Extension Harness … Not Illustrated 14 154061 4 Tinnerman U-Nut Retainer 15 183129 4 #10-32 x 1/2” T20 Truss Head

®

Screw

Parts List

* Specify color when ordering.

450299-3 www.amdry.com 7

Parts Diagram

8 American Dryer Corporation 450299 -3

Illus. No. Part No. Qty. Description

1* 140877 2 SL50 #29 Orifice Natural Gas

140880 2 SL75 #22 Orifice Natural Gas

140881 2 SL50 #47 Orifice Liquid Propane

140905 2 SL75 #44 Orifice Liquid Propane

884248 1 SL50 Liquid Propane Conversion Kit

884249 1 SL75 Liquid Propane Conversion Kit 2 183137 2 3/8” Close Nipple Black Iron 3 154355 1 U-Bolt with Nuts for 1/2” Black Pipe 4 143344 1 SL50 1/2” x 26” Black Pipe ONLY

142636 1 SL75 1/2” x 36” Black Pipe ONLY 5 350226 1 Rear Gas Pipe Support 6 851387 1 Burner Funnel Transition Assembly 7 154200 14 5/32 Pop Rivet 8 130500 2 Radiant Heat Sensor 9 350217 1 Burner Funnel Top Lip Bracket 10 128910 2 Hot Surface Ignitor 11 851386 1 SL50 60 Hz Natural Gas Dual Burner Assembly

851389 1 SL50 50 Hz Natural Gas Dual Burner Assembly

851390 1 SL75 60 Hz Natural Gas Dual Burner Assembly

851391 1 SL75 60 Hz Natural Gas Dual Burner Assembly

350219 2 SL50 Round Gas Burner Funnel

350223 2 SL75 Round Gas Burner Funnel 12 152014 4 1/4-20 Free Spin Nut 13 350221 1 Dual Round Gas Burner Support Bracket 14 150331 19 #8-18 x 1/2” Pan Head TORX 15 350253 1 Front Gas Pipe Bracket 16 881367 1 Gas Shutoff Assembly 17 142820 1 1/2” x 1/2” x 1/2” Black Iron Tee 18 142703 1 1/2” x 4” Black Iron Pipe 19 142500 1 1/2 - 90° Elbow 20 142953 2 3/8” x 1/2” Steel Bushing 21 128944 2 25M Gas Valve 120 VAC 60 Hz

128907 2 25M Gas Valve 120 VAC 50 Hz 22 350220 1 Dual Gas Valve Bracket 23 183144 2 In-Shot Tube 24 185063 2 Ignitor Bracket 25 183145 2 Hot Surface Ignitor Mounting Screw

®

Screw

Parts List

* Consult factory for elevation over 2,000 feet for correct burner orifice size.

450299-3 www.amdry.com 9

Parts Diagram

10 American Dryer Corporation 450299 -3

Drive Motor Assembly

Illus. No. Part No. Qty. Description

1 851570 1 SL75 Motor Assembly with Mount (for all 60 Hz models except 208 volt)

851544 1 SL75 Motor Assembly with Mount (for 208 volt 60 Hz)

851545 1 SL75 Motor Assembly with Mount (for all 50 Hz models)

851570 1 SL50 Motor Assembly with Mount (for 60 Hz models mfd. as of February 3, 2006)

851545 1 SL50 Motor Assembly with Mount (for 50 Hz models mfd. as of February 3, 2006)

851286 1 SL50 Motor Assembly with Mount (for 60 Hz models mfd. prior to February 3, 2006)

851315 1 SL50 Motor Assembly with Mount (for 50 Hz models mfd. prior to February 3, 2006)

181122 1 Drive Motor (for all models except SL75 208 volt 60 Hz)

181127 1 Drive Motor (for SL75 208 volt 60 Hz) 2 851543 1 Motor Mount Plate Assembly

(for models mfd. as of August 2, 2006)

851285 1 Motor Mount Clinch Nut Assembly

(for models mfd. prior to August 2, 2006)

3 185420 1 SL50 / SL75 15 Rib 60 Hz Motor Sheave

(for all SL75 and SL50 models mfd. as of February 3, 2006)

185462 1 SL50 / SL75 15 Rib 50 Hz Motor Sheave

(for all SL75 and SL50 models mfd. as of February 3, 2006)

350266 1 SL50 12 Rib 60 Hz Motor Sheave

(for models mfd. prior to February 3, 2006)

350267 1 SL50 12 Rib 50 Hz Motor Sheave

(for models mfd. prior to February 3, 2006) 154321 1 5/16-24 x 3/8” Setscrew 170733 1 Loctite … Not Illustrated

4 150501 7 5/16-18 x 3/4” Hex Head Bolt 5 150609 1 1/2”-13 x 4-1/2” Bolt

(for models mfd. as of August 2, 2006) 150616 1 1/2”-13 x 5-1/2” Bolt

(for models mfd. prior to August 2, 2006) 152011 3 1/2”-13 Hex Nut 153033 2 1/2” x 1-3/8” Flat Washer

6 152004 2 5/16-18 Hex Nut 7 154266 2 5/16-18 Shoulder Bolt 8 152014 5 Free Spin Wash Nut 9 153001 7 Flat Washer 10 153002 9 Split Lock Washer 11 350301 1 Motor Mount Base Assembly

(for models mfd. as of August 2, 2006) 851284 1 Motor Mount Base Assembly

(for models mfd. prior to August 2, 2006)

12 153018 2 1/4” Flat Washer 13 851510 1 Idler Arm

(for models mfd. prior to August 2, 2006)

14 150634 1 3/8” x 2-3/4” Hex Cap Screw

(for models mfd. prior to August 2, 2006) 153004 1 1” Flat Washer

(for models mfd. prior to August 2, 2006) 153005 1 3/8” Lock Washer

(for models mfd. prior to August 2, 2006)

15 100281 1 Idler Wheel

(for models mfd. prior to August 2, 2006)

Parts List

450299-3 www.amdry.com 11

Parts Diagram

12 American Dryer Corporation 450299 -3

Illus. No. Part No. Qty. Description

1 851395 1 SL50 Electric Oven Assembly 200-415v

851396 1 SL75 Electric Oven Assembly 200-415v

2 119996 1 SL50 16 kW Element

119997 1 SL75 22 kW Element

3 350230 1 Electric Oven Support Bracket 4 152014 2 Free Spin Wash Nut 5 131322 1 208/240v 30A Contactor 50/60 Hz

131323 1 120v 40A Contactor 50/60 Hz 131324 1 208/240v 40A Contactor 50/60 Hz 131325 1 120v 50A Contactor 50/60 Hz 131329 1 120v 75A Contactor 50/60 Hz 131330 1 208/240v 75A Contactor 50/60 Hz

6 132029 1 Auto Transformer 7 165067 1 Copper Steam Coil 8 813415 1 Steam Solenoid Phase 8 Assembly 120v

813416 1 Steam Solenoid Phase 8 Assembly 220-240v

Parts List

450299-3 www.amdry.com 13

Parts Diagram

14 American Dryer Corporation 450299 -3

Lint and Blower Assembly Illus. No. Part No. Qty. Description

1 819299 1 Large Lint Box Assembly

(includes illus. nos. 3 through 5)

2 819295 1 Large Cold Rolled Steel Lint Drawer Assembly 3 818369 1 Exhaust Temperature Probe Assembly 4 130119 1 190° Exhaust Hi-Limit Sensor 5 122002 1 Lint Drawer Switch 6 851242 1 115v Impellor and Capacitor Assembly

851243 1 230v Impellor and Capacitor Assembly 150691 4 Impellor Mounting Screw … Not Illustrated 153007 4 Lock Washer for Impellor Mounting Screw … Not Illustrated

7 100618 1 Capacitor for 115v Blower Impellor

100670 1 Capacitor for 230v Blower Impellor

8 851292 1 SL50 Blower Housing Complete Assembly

851365 1 SL75 Blower Housing Complete Assembly

Parts List

Rear Tumbler Support Panel Assembly Illus. No. Part No. Qty. Description

1 851263 1 Gas and Electric Rear Tumbler Support Panel Assembly

851401 1 Steam Rear Tumbler Support Assembly with Steam Coil

2 851372 2 SL50 / SL75 Rear Wheel Bracket Assembly

851562 2 SL50 / SL75 Rear Wheel Bracket Assembly for Banded 180060 1 3-1/2” Wheel ONLY

3 121010 2 Terminal Lug 4 851258 1 Axial Probe Assembly 5 818570 1 Sail Switch Assembly Complete

122200 1 Sail Switch ONLY

6 183112 1 205° Hi-Limit Sensor 7 851262 1 Heat Duct 8 152014 13 1/4-20 Free Spin Nut 9 350237 1 Rear Electric Box

350238 1 Rear Electric Box Cover

10 350228 1 Thrust Bearing Box 11 318691 1 Cover Plate (for models without a fire suppression system) 12 851514 1 Fire Suppression System Assembly (for US and Canada)

851515 1 Fire Suppression System Assembly (for export) 819855 1 Cold Weather Package for Fire Suppression System … Not Illustrated

450299-3 www.amdry.com 15

ADC Part No. 450299 3 - 07/02/08 - 0

American Dryer Corp SL50, SL75 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual