American Dryer Corp SL3131 User Manual

SL3131 Parts Manual

Phase 8

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447

e-mail: techsupport@amdry.com

www.amdry.com

ADC Part No. 450276-3

Retain This Manual

In A Safe Place For Future Reference

This product embodies advanced concepts in

engineering, design, and safety. If this product

is properly maintained, it will provide many years

of safe, efficient, and trouble free operation.

ONLY properly licensed technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment

or specified in the installation manual included with the dryer.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. The manufacturer reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

Important

For your convenience, log the following information:

DATE OF PURCHASE ________________________________________________ MODEL NO. _________________

SL3131

RESELLER’S NAME ________________________________________________________________________________

Serial Number(s) ____________________________________________________________________________________

___________________________________________________________________________________________________

Replacement parts can be obtained from your reseller

or the ADC factory. When ordering replacement parts from

the factory, you can FAX your order to ADC at +1 (508) 678-9447

or telephone your order directly to the ADC Parts Department

at +1 (508) 678-9000. Please specify the dryer model number

and serial number in addition to the description and part number,

so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict

your particular dryer exactly. The illustrations are a composite

of the various dryer models. Be sure to check the

descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

NOTES _______________________________________________________________________

______________________________________________________________________________

Parts Diagram

Illus. No. Part No. Qty. Description

1 319427 1 Upper Back Guard (Gas and Electric)

319426 1 Lower Back Guard (Gas and Electric) 319435 1 Upper Back Guard (Steam) (For models mfd. as of December 7, 2005) 319542 1 Upper Back Guard (Steam) (For models mfd. prior to December 7, 2005) 319436 1 Back Guard Lower (Steam) (For models mfd. as of December 7, 2005) 319543 1 Back Guard Lower (Steam) (For models mfd. prior to December 7, 2005) 319437 1 Back Guard Right (Steam) (For models mfd. as of December 7, 2005) 319544 1 Back Guard Right (Steam) (For models mfd. prior to December 7, 2005) 819449 1 Exhaust Transition Piece for Formed Blower Housing (Gas and Electric) 318927 1 Exhaust Transition Piece for Made In House Blower Housing (Gas and Electric) 819159 1 Exhaust Transition Piece for Formed Blower Housing (Steam)

2 819619 1 Left Side Panel Assembly (For models mfd. as of December 7, 2005)

3 819621 1 Right Side Panel Assembly (For models mfd. as of December 7, 2005)

4 818690 1 Outer Top Panel Assembly

319545 1 Exhaust Transition Piece for Made In House Blower Housing (Steam)

818679 1 Left Side Panel Assembly (For models mfd. prior to December 7, 2005)

818678 1 Right Side Panel Assembly (For models mfd. prior to December 7, 2005)

4 American Dryer Corporation 450276-3

Parts List

Illus. No. Part No. Qty. Description

5 150445 2 1/4-20 x 3/4” Bolt 6 153072 2 Spring Washer 7 318891 1 Backup Washer 8 153048 2 Friction Pad (Gas and Electric)

9 818183 1 Front Right Wheel Assembly (parts breakdown on page 11)

10 819288 1 Lint Screen Assembly (Painted)

11 818815 1 Tumbler Assembly (Galvanized)

12 102407 1 Belt 13 819132 1 Front Panel Assembly (Coin)

14 819301 1 Door Assembly Right Hinge (White)

15 170233 1 Handle 16 819194 1 Rotation Sensor Assembly 17 819190 1 Top Trim Panel Assembly (White)

18 819196 1 Door Switch Assembly 19 819504 1 Phase 8 Control Door Assembly (25¢ Coin)

20 185097 1 Toe Panel (White)

21 884288 1 1/4 hp Motor with Sheave – 60 Hz (For models mfd. as of September 1, 2005)

22 152004 2 5/16-18 Hex Nut 23 153002 2 5/16” Split Lock Washer 24 153018 2 1/4” Flat Washer 25 154266 2 3/8” x 3/8” (5/16-18) Screw 26 318909 1 Motor Sheave – 60 Hz

27 152011 1 1/2-13 Hex Nut

28 153011 1 9/16” ID, 1-3/8” OD Flat Washer 29 150609 1 1/2-13 x 4-1/2” Tap Bolt 30 818213 1 Coin Acceptor Assembly (25¢ Coin)

31 112587 2 Keypad (Coin)

32 318930 1 Control Panel Right Hinge 33 319337 1 Phase 8 Control Cover 34 887102 1 Phase 8 Computer

35 819196 1 Door Switch Assembly 36 318929 1 Control Panel Left Hinge 37 122200 1 Program Switch (For models mfd. prior to February 28, 2007) 38 154004 1 Twin Speed Nut (For models mfd. prior to February 28, 2007) 39 160066 1 1-1/8” Long Cam (For models mfd. prior to February 28, 2007) 40 160071 1 Lock (For models mfd. as of February 28, 2007)

102373 2 Friction Pad (Steam)

818184 1 Front Left Wheel Assembly (parts breakdown on page 11)

819315 1 Lint Screen Assembly (Stainless Steel)

819398 1 Tumbler Assembly (Stainless Steel)

819359 1 Front Panel Assembly (Non-Coin [OPL]) 102004 2 Magnet 102005 2 Magnet Blank 152224 4 Magnet Screw 400563 1 Magnet Removal Bit

819388 1 Door Assembly Right Hinge (Stainless Steel) 819700 1 Door Assembly Left Hinge (White) 819387 1 Door Assembly Left Hinge (Stainless Steel) 102396 1 Door Gasket 103067 2 Door Hinge

819192 1 Top Trim Panel Assembly (Stainless Steel)

819625 1 Phase 8 Control Door Assembly (Programmable – Euro) 819608 1 Phase 8 Control Door Assembly (Non-Coin [OPL]) 154061 8 U-Nut Retainer 183129 8 T-20 Truss Head Machine Screw

185048 1 Toe Panel (Stainless Steel)

887030 1 1/4 hp Motor with Sheave – 50 Hz (For models mfd. as of September 1, 2005) 818485 1 Motor Assembly (For models mfd. prior to September 1, 2005)

185067 1 Motor Sheave – 50 Hz

152028 1 1/2-13 Nylon Insert Locknut

819264 1 Coin Acceptor (Programmable – Euro)

112586 2 Keypad (Non-Coin [OPL])

887103 1 Phase 8 Computer with “S.A.F.E.” System Option

160038 1 Lock (For models mfd. prior to February 28, 2007) 160140 1 Key

450276-3 www.amdry.com 5

Parts Diagram

6 American Dryer Corporation 450276-3

Parts List

Illus. No. Part No. Qty. Description

1 819450 1 Lint Box / Blower Assembly Complete 120V

819193 1 Lint Box / Blower Assembly Complete 120V

819233 1 Lint Box / Blower Assembly Complete 200-240V

819455 1 Lint Box / Blower Assembly Complete 200-240V

819193 1 Lint Box / Blower Assembly Complete 208-240V with Transformer

2 851242 1 Blower Motor Assembly 120V

819185 1 Blower Motor Assembly 120V

819232 1 Blower Motor Assembly 200-240V

851243 1 Blower Motor Assembly 200-240V

819185 1 Blower Motor Assembly 200-240V with Transformer

3 100618 1 20 MFD Capacitor 120V

100639 1 32 MFD Capacitor 120V

100638 1 8 MFD Capacitor 200-240V

100670 1 5 MFD Capacitor 200-240V

100639 1 32 MFD Capacitor 200-240V with Transformer

4 130119 1 L190 Automatic Thermostat 5 185084 1 Blower Housing Formed with Back Draft Damper

818545 1 Blower Housing Made In-House 6 818986 1 Exhaust Temperature Sensor Assembly 7 122003 1 Lint Door Switch 8 318993 1 Rear Electrical Box (Gas and Steam)

319327 1 Rear Electrical Box (Electric)

318727 1 Rear Electrical Box Cover 9 153021 1 1/4” Shakeproof Washer

10 121010 1 Terminal Lug 11 152002 1 1/4-20 Hex Nut 12 819188 1 Axial Temperature Sensor Assembly 13 152015 1 #8-32 Hex Nut 14 120728 1 Quick-Connect Terminal Block 15 153073 2 #8-32 KEPS Nut 16 122200 2 Sail Switch 17 150025 2 #4-40 x 1” Phillips Screw 18 154004 1 Twin Speed Nut 19 153073 14 #8-32 KEPS Nut 20 819113 1 Heat Duct with Sail Switch Assembly 21 818109 1 Front Left / Rear Right Wheel (Parts Breakdown on page 11) 22 818110 1 Front Right / Rear Left Wheel (Parts Breakdown on page 11)

(For models mfd. as of September 1, 2006)

(For models mfd. prior to September 1, 2006)

(For models mfd. prior to June 14, 2006 and as of December 20, 2006)

(For models mfd. between June 14, 2006 and October 24, 2006)

(For models mfd. between October 25, 2006 and December 20, 2006)

(For models mfd. as of September 1, 2006)

(For models mfd. prior to September 1, 2006)

(For models mfd. prior to June 14, 2006 and as of December 21, 2006)

(For models mfd. between June 14, 2006 and October 24, 2006)

(For models mfd. between October 25, 2006 and December 20, 2006)

(For models mfd. as of September 1, 2006)

(For models mfd. prior to September 1, 2006)

(For models mfd. prior to June 14, 2006 and as of December 21, 2006)

(For models mfd. between June 14, 2006 and October 24, 2006)

(For models mfd. between October 25, 2006 and December 20, 2006)

450276-3 www.amdry.com 7

Parts Diagram

8 American Dryer Corporation 450276-3

Parts List

Illus. No. Part No. Qty. Description

1 819314 1 Burner Assembly

2 183112 1 Thermostat, Gas High-Limit 3 183144 1 Inshot Burner Tube, Hot Surface Ignition 4 128944 1 Gas Valve 120 VAC 60 Hz

5 141318 1 3/8” 90º Union Shutoff 6 140880 1 Natural Gas #22 Burner Orifice

7 128910 1 Globar 8 183145 1 #8-32 x 7/8” Hex Screw with Washer 9 130500 1 Radiant Control

10 185096 1 3/8” N.P.T. Male 90º Gas Pipe

11 819579 1 Steam Valve Assembly 120V 12 165066 1 Copper Steam Coil 13 183112 1 High-Limit Thermostat 14 119995 1 Electric Element 15 819712 1 120V to 24V Transformer

16 131352 1 40-amp 24V Contactor

819313 1 Burner Chamber

128907 1 Gas Valve 120 VAC 50 Hz 884254 1 Liquid Propane Conversion Kit

140905 1 Liquid Propane Gas #44 Burner Orifice

142953 1 1/2” x 3/8” Reducer

819251 1 208V to 24V Transformer 819267 1 240V to 24V Transformer 132029 1 208-240V to 120V Transformer

131357 1 50-amp 24V Contactor 131321 1 30-amp 120V Contactor 131325 1 50-amp 120V Contactor 131324 1 40-amp 208-240V Contactor

®

450276-3 www.amdry.com 9

S.A.F.E. System Assembly Parts Diagram / List

Illus. No. Part No. Qty. Description

1 143025 1 Nylon Hose Adaptor 2 136987 1 Pressure Switch 3 165120 1 Water Valve 4 143236 1 3/8” Brass Cross 5 143251 1 3/8” Plug 6 318422 1 S.A.F.E. Bracket 7 143581 1 Spray Nozzle 8 143208 1 3/8” Brass Connector 9 143099 1 3/8” OD Copper Tubing

10 American Dryer Corporation 450276-3

Wheel Assembly Parts Diagram / List

Illus. No. Part No. Qty. Description

1 150510 3 1/4-20 x 3/4” Hex Head Machine Bolt 2 153007 3 1/4” Lock Washer 3 154267 1 M10 x 25mm Shoulder Screw 4 153002 1 5/16” Lock Washer 5 154013 1 M8 Hex Nut 6 154284 1 Tumbler Wheel Spacer 7 318233 1 Rear Right Roller Wheel Bracket

8 153564 3 1/4-20” Clinch Nut 9 153018 3 1/4” Flat Washer

10 180050 1 Wheel

450276-3 www.amdry.com 11

318232 1 Rear Left Roller Wheel Bracket ... Not Illustrated 318532 1 Front Right Wheel Bracket ... Not Illustrated 318531 1 Front Left Wheel Bracket ... Not Illustrated

ADC Part No. 450276 3 - 05/22/07 - 0