American Dryer Corp SL2020 User Manual

Page 1
SL2020 Parts Manual
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
e-mail: techsupport@amdry.com
www.amdry.com
ADC Part No. 450275
Page 2
Ret ain This Manual
In A Safe Place For Future Reference
This product embodies advanced concepts in
engineering, design, and safety. If this product
is properly maintained, it will provide many years
of safe, efficient, and trouble free operation.
ONLY properly licensed technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment
or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted
near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
We have tried to make this manual as complete as possible and hope you will find it useful. The manufacturer reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
Important
For your convenience, log the following information:
DATE OF PURCHASE ________________________________________________ MODEL NO. _________________
SL2020
RESELLER’S NAME ________________________________________________________________________________
Serial Number(s) ____________________________________________________________________________________
___________________________________________________________________________________________________
___________________________________________________________________________________________________
Page 3
Replacement parts can be obtained from your reseller
or the ADC factory. When ordering replacement parts from
the factory, you can FAX your order to ADC at (508) 678-9447
or telephone your order directly to the ADC Parts Department
at (508) 678-9000. Please specify the dryer model number
and serial number in addition to the description and part number,
so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict
your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the
descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
NOTES _______________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Page 4
Parts Diagram
4 American Dryer Corporation 450275-2
Page 5
Parts List
Illus. No. Part No. Qty. Description
1 818659 1 Outer Top Assembly 2 818807 1 Right Side Panel Assembly 3 818808 1 Left Side Panel Assembly 4 818806 1 Back Guard Assembly
185024 1 Exhaust Bracket
150331 18 #8-18 x 1/2” T20 TORX 5 819392 1 Door Right Hand 6 170233 1 Door Handle 7 8181 15 1 Tumbler Assembly
1 15906 1 Tumbler Felt
401010 1 Adhesive (For Felt) 8 818805 2 Rear Tumbler Support
122200 2 Sail Switch
819188 2 S.A.F.E. Temperature Sensor Harness
819323 2 Phase 8 Hot Surface Ignition Sail Switch Assembly 9 153048 4 Inner Friction Pad
10 318891 2 Backup Washer 2 Screws 11 150445 4 1/4-20 x 3/4” Bolt, Black 12 818728 2 Left Rear Wheel Assembly
818729 2 Right Rear Wheel Assembly
180050 2 Support Wheel
13 100197 1 Belt 14 818655 2 Front Tumbler Support Assembly
819362 2 Front Tumbler Support Assembly with Auto Cycle
819357 2 Moisture Sensor Assembly
15 818713 2 Front Right Wheel Assembly
818714 2 Front Left Wheel Assembly
180050 2 Support Wheel
16 819196 2 Phase 8 Door Switch Assembly 17 818853 1 T op T rim Panel Assembly
154061 16 U-Nut Retainer
183129 16 #10-32 x 1/2” T20 Truss Head
112375 1 Solaris Oval Logo
18 818899 1 Phase 8.4 Coin Control Panel Assembly
819326 1 Phase 8.4 Non-Coin Control Panel Assembly
19 185108 1 Toe Panel with Slots
DETAIL 1
20 181125 2 1/4 hp Reversing 8-Pin Motor 21 153002 4 5/16” Split Lock Washer
22 152004 4 5/16-18 Hex Nut 23 153001 4 5/16” Flat Washer 24 185001 2 60 Hz 4-Pole Motor Sheave
25 318548 2 Motor Base
DETAIL 2
26 818213 1 Phase 8 Coin Acceptor Assembly 27 819308 1 Phase 8 Display Mount Stud Assembly
28 137280 1 Computer Board
29 319187 1 Cover 30 318929 1 Control Panel Hinge (Left)
31 818899 1 Coin Control Panel Assembly 32 883978 1 Lock with Cam (No Key)
33 1 12586 2 Non-Coin Membrane Keypad
819304 2 Drive Motor Assembly
154321 2 Allen Setscrew
818661 1 Coin Vault Assembly
136116 1 3-Amp Fast-Acting Fuse
136054 2 15-Amp / 250V / 3ab Slo-Blo Fuse
318930 1 Control Panel Hinge (Right)
154200 4 5/32” Rivet for 1/8-5/16”
160140 1 X4451 Key
1 12587 2 Coin Membrane Keypad
450275-2 www.amdry.com 5
Page 6
Parts Diagram
6 American Dryer Corporation 450275-2
Page 7
Parts List
Illus. No. Part No. Qty. Description DETAIL 3
34 143025 1 3/8” x 3/4” N.P.T. Nylon Hose Adaptor 35 143155 2 3/8” Brass Street Elbow 36 143152 2 1/4” Comp x 1/8” M.P.T. Straight Connection 37 319231 2 S.A.F.E. Valve Bracket 38 150331 2 #8-18 x 1/2” T20 TORX 39 165120 2 S.A.F.E. Valve 24V DC 40 319231 2 S.A.F.E. Valve Bracket 41 143581 2 S.A.F.E. 3/8” N.P.T. Spray Nozzle 42 143155 1 3/8” Brass Street Elbow 43 143183 1 7/16-20 x 3/8” N.P.T. Adaptor Brass 44 143236 1 3/8” Brass Pipe Cross
143099 1 3/8” Copper Tubing
143303 1 3/8” N.P.T. Brass Locknut
136987 1 Water Pressure Switch
819337 1 Phase 8 Deltrol S.A.F.E. Assembly
DETAIL 4
45 185023 2 Gas Pipe Bracket 46 154356 2 U-Bolt with Nuts 47 185179 2 Hot Surface Ignition Gas Pipe 48 130500 2 Radiant Control Sensor 49 183145 2 #8-32 x 7/8” Hex Conical 50 318979 2 Gas Train Support Bracket
51* 140873 2 #30 Burner Orifice (Natural Gas)
140874 2 #49 Burner Orifice (Liquid Propane Gas)
52 185061 2 Hot Surface Ignition Burner Base 53 143318 2 Brass Adaptor 54 128944 2 25m Gas Valve 120 VAC 60 Hz
* 884253 2 ‘M’ Valve 80k Btu Liquid Propane Kit
55 183144 2 Inshot Burner Tube Hot Surface Ignition 56 185063 2 Hot Surface Ignition Ignitor Bracket 57 128910 2 Hot Surface Ignitor 80V 58 183112 2 Thermostat 59 150331 16 #8-18 x 1/2” T20 TORX 60 185066 2 Burner Cone
818891 2 120V 60 Hz Gas Train Assembly
132029 2 350VA Autotransformer (208-240)
DETAIL 5
61 819347 2 Lint Box Top Stud Assembly 62 130112 2 Thermostat 225º Automatic 63 122002 2 Door Switch 64 818804 2 Lint Coop Blower Assembly 65 318866 2 4 Circuit Connection Plate 66 150331 2 #8-18 x 1/2” T20 TORX 67 318224 2 Blower Housing Rear Support Bracket 68 818725 2 Blower Housing
181 139 Blower Housing
(for models mfd. as of April 2006)
319904 Blower Housing Mount
(for models mfd. as of April 2006) 818975 120V Blower Motor Assembly 819277 2 230V Blower Motor Assembly (Phase 8)
69 153049 4 Washer 70 153024 4 #10 Split Lock Washer 71 152008 8 #10-32 Hex Nut 72 100623 2 25MFD Capacitor 440 VAC 50-60 Hz 73 117604 20 1/8” Thick x 3/8” Wide Neoprene Sponge Tape 74 818803 2 Lint Box Assembly 75 818986 2 Phase 8 Exhaust Temperature Sensor Assembly 76 154007 4 1/4” Push-On Fastener 77 117604 2 1/8” Thick x 3/8” Wide Neoprene Sponge Tape
DETAIL 6
78 130123 2 300º F Temperature Sensor 79 120089 2 5.4 kW/240V 8.1 kW/416V Element 80 –––––– Oven Contactor 81 318361 2 Electric Oven Bracket 82 819345 4 Cold Rolled Steel Lint Drawer Assembly
819287 4 Lint Drawer Handle Plate Assembly
* Contact factory for elevations above 2,000 feet.
450275-2 www.amdry.com 7
Page 8
ADC Part No. 450275 2 - 05/03/06 - 0
Loading...