American Dryer Corp ML-95 User Manual

Page 1
ML-95 Parts Manual
1996 Thru February 1999
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
www.amdry.com
Page 2
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.
The following “FOR YOUR SAFETY ” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
ML-95 Phase 6
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Page 3
Table of Contents
Control Door Assembly .......................................................................................................................... 2
Phase 6 Microprocessor Panel Assembly for models mfd. as of February 11, 1998.................................. 3
Phase 6 Microprocessor Panel Assembly for models mfd. prior to February 11, 1998.............................. 4
Sensor Bracket Assembly ....................................................................................................................... 5
Front Panel/Main Door Assemblies for models mfd. as of October 24, 1997 ....................................... 6, 7
Front Panel/Main Door Assemblies for models mfd. prior to October 24, 1997 ................................... 8, 9
Main Door Switch for models mfd. as of October 24, 1997 .................................................................. 10
Main Door Switch for models mfd. prior to October 24, 1997 ...............................................................11
Lint Door Assembly ........................................................................................................................ 12, 13
Basket (Tumbler) Assembly .................................................................................................................. 14
Front Thruster Wheel Assembly for models mfd. between September 15, 1997 and April 6, 1998 ......... 15
Front Thruster Wheel Assembly for models mfd. prior to September 15, 1997....................................... 16
Rear Thruster Wheel Assembly for models mfd. between September 15, 1997 and April 6, 1998 .......... 17
Rear Thruster Wheel Assembly for models mfd. prior to September 15, 1997........................................ 18
Front Thruster Wheel Assembly for models mfd. as of April 6, 1998 ...................................................... 19
Rear Thruster Wheel Assembly for models mfd. as of April 6, 1998 ....................................................... 20
Idler Shaft Assembly for models mfd. as of December 15, 1997 ............................................................ 21
Idler Shaft Assembly for models mfd. prior to December 15, 1997 ........................................................ 22
Drive Shaft Assembly for models mfd. as of December 15, 1997 ........................................................... 23
Drive Shaft Assembly for models mfd. prior to December 15, 1997 ....................................................... 24
Drive Motor Assembly.......................................................................................................................... 25
Blower (Fan/Impellor) Motor Assembly ................................................................................................ 26
Sail Switch Assembly ............................................................................................................................ 27
Blower (Fan/Impellor) Wheel Assembly (with Air Jet) for models mfd. as of July 1, 1998 ................. 28, 29
Blower (Fan/Impellor) Wheel Assembly (without Air Jet) for models mfd. prior to July 1, 1998 ........ 30, 31
Burner Assembly ............................................................................................................................ 32, 33
Reversing Relay Panel Assembly for 208/230/240/380/416 Volt Models Only ................................. 34, 35
Reversing Relay Panel Assembly for 460/480 Volt Models Only ............................................................ 36
Transition Piece Assembly with Damper for models mfd. as of September 12, 1997 ............................... 37
Exhaust Adapter Assembly for models mfd. prior to September 12, 1997 .............................................. 38
Pneumatic Valve Assembly for models mfd. as of July 1, 1998 ............................................................... 39
Page 4
2
Control Door Assembly
Illus. No. Part No. Qty. Description
1 882093 1 White Control Door Assembly (As of February 11, 1998)
882092 1 Blue Control Door Assembly (As of February 11, 1998) 881732 1 White Control Door Assembly ONLY (Prior to February 11, 1998)
881731 1 Blue Control Door Assembly ONLY (Prior to February 11, 1998) 2 112368 1 Milnor Logo ONLY 3 160005 2 Spring Turn Latch (2-piece) 4 150309 9 #10-16 x 1/2” Hex Head TEK Crimptite Screw 5 102505 1 Control Door Support Rod 6 102601 1 Control Door Retainer Clip 7 102600 1 Control Door Rod Catch
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 5
Phase 6 Microprocessor Panel Assembly
As of February 11, 1998
3
Illus. No. Part No. Qty. Description
1 112537 1 Phase 6 OPL Keyboard (touch pad)
112276 1 OPL Stick-On Labels
(English Only) Not Illustrated
112275 1 3 Language OPL Stick-On Labels
(Spanish, Italian, and Hebrew) Not Illustrated
112277 1 3 Language OPL Stick-On Labels
(English, Spanish, and Hebrew) Not Illustrated
112278 1 5 Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese) Not Illustrated 2 824480 1 Phase 6 Microprocessor Controller (computer) Panel ONLY 3 137124 1 Phase 6 Reversing Microprocessor Controller (computer) with Air Jet
(As of June 26, 1998)
137122* 1 Phase 6 Reversing Microprocessor Controller (computer) without Air Jet
(For models mfd. between February 11, 1998 and June 26, 1998) 4 150005 6 #6-32 x 3/4” Phillips Round Head Machine Screw 5 153010 6 #6 Star Washer 6 136048 1 1/8-Amp (Slo Blo) Fuse 7 136017 1 3.5-Amp (Fast Acting) Fuse 8 136019 1 1-Amp (Fast Acting) Fuse
* For dryers manufactured between February 11, 1998 and June 26, 1998 with air jet added, use Part No.
137124 Phase 6 reversing microprocessor controller (computer) with air jet.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 6
4
Phase 6 Microprocessor Panel Assembly
Prior to February 11, 1998
Illus. No. Part No. Qty. Description
1 112537 1 Phase 6 OPL Keyboard (touch pad)
112276 1 OPL Stick-On Labels
(English Only) Not Illustrated
112275 1 3 Language OPL Stick-On Labels
(Spanish, Italian, and Hebrew) Not Illustrated
112277 1 3 Language OPL Stick-On Labels
(English, Spanish, and Hebrew) Not Illustrated
112278 1 5 Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese) Not Illustrated 2 137116 1 Phase 6 Microprocessor Controller (computer) 3 137118 1 Phase 6 OPL Input/Output (I/O) Board, Reversing 4 137121 1 12” Ribbon Cable Assembly 5 150005 6 #6-32 x 3/4” Phillips Round Head Machine Screw 6 153010 6 #6 Star Washer 7 881730 1 Microprocessor Controller (computer) Panel ONLY
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 7
Sensor Bracket Assembly
5
Illus. No. Part No. Qty. Description
1 880251 1 1/4” Temperature Sensor Probe Assembly Complete
(includes illus. nos. 1 and 5 through 8) 2 130103 1 225º Large Automatic Thermostat ONLY 3 153010 2 #6 Star Washer 4 152000 2 #6-32 Hex Nut 5 121028 2 Insulated Terminal ONLY 6 122701 4 Socket Terminal ONLY 7 122605 1 4-Pin Socket Connector ONLY 8 154007 2 1/4” Tinnerman Push-on Fastener 9 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw 10 881710 1 Sensor Mounting Bracket Assembly Complete
(includes illus. nos. 1 through 10)
390121 1 Universal Sensor Bracket ONLY 11 122604 1 4-Pin Connector ONLY 12 122700 4 Pin Terminal ONLY 13 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 8
6
Front Panel/Main Door Assemblies
As of October 24, 1997
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 9
Front Panel/Main Door Assemblies
As of October 24, 1997
Illus. No. Part No. Qty. Description
1 881804 1 White Front Panel Assembly
(includes illus. nos. 1, 15, and 16) For models mfd. as of December 3, 1997
881696 1 White Front Panel Assembly
(includes illus. nos. 1, 15, and 16) For models mfd. prior to December 3, 1997
881805 1 Blue Front Panel Assembly
(includes illus. nos. 1, 15, and 16) For models mfd. as of December 3, 1997
881762 1 Blue Front Panel Assembly
(includes illus. nos. 1, 15, and 16) For models mfd. prior to December 3, 1997
2 102214 1 29-7/8” Door Glass
170730 1 Door Glass Adhesive (10.3 oz. cartridge) 3 102357 1 Main Door Gasket 4 881689 1 White Main Door Assembly Complete
(includes illus. nos. 2 through 10)
881761 1 Blue Main Door Assembly Complete
(includes illus. nos. 2 through 10) 881684 1 White Main Door Ring 881756 1 Blue Main Door Ring
5 881806 6 1/4-20 Free Spin Wash Nut (White)
881807 6 1/4-20 Free Spin Wash Nut (Blue)
6 881740 6 1/4-20 x 5/8” (White) Carriage Bolt
881739 6 1/4-20 x 5/8” (Blue) Carriage Bolt
7 881688 1 White Main Door Handle
881737 1 Blue Main Door Handle
8 881685 1 White Main Door Hinge
881757 1 Blue Main Door Hinge
9 150120 1 Main Door Latch Screw
(#10-32 Dome Hex Head Screw)
10 151010 1 #10-32 Acorn Nut 11 122351 1 “EMERGENCY STOP” Push-Pull Button 12 122419 1 “EMERGENCY STOP” Nameplate 13 132387 1 Normally Closed (N.C.) Contact Block 14 132395 1 Normally Closed (N.C.) Contact Block with Base 15 170330 1 Friction Door Latch 16 154215 2 5/32” Pop Rivet
7
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 10
8
Front Panel/Main Door Assemblies
Prior to October 24, 1997
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 11
Front Panel/Main Door Assemblies
Prior to October 24, 1997
Illus. No. Part No. Qty. Description
1 881741 1 White Main Door Handle
881760 1 Blue Main Door Handle
2 151011 3 5/16-18 Acorn Nut 3 881817 1 White Front Panel/Main Door Assemblies with “EMERGENCY STOP”
Button (includes illus. nos. 1 through 12) 881822 1 Blue Front Panel/Main Door Assemblies with “EMERGENCY STOP”
Button (includes illus. nos. 1 through 12) 881815 1 White Front Panel/Main Door Assemblies without “EMERGENCY STOP”
Button (includes illus. nos. 1 through 8) 881819 1 Blue Front Panel/Main Door Assemblies without “EMERGENCY STOP”
Button (includes illus. nos. 1 through 8)
4 151011 9 5/16-18 Acorn Nut 5 102210 1 20-7/16” Door Glass
170730 1 Door Glass Adhesive (10.3 oz. cartridge)
6 102112 2 Door Magnet (5/16” x 1/4” x 34-3/4”) 7 102356 1 Main Door Gasket (13-1/6” x 1-3/8” x 97-1/2”) 8 881729 1 White Front Panel ONLY for “EMERGENCY STOP”
881824 1 Blue Front Panel ONLY for “EMERGENCY STOP” 881728 1 White Front Panel ONLY 881821 1 Blue Front Panel ONLY
9 122351 1 “EMERGENCY STOP” Push-Pull Button 10 122419 1 “EMERGENCY STOP” Nameplate 11 132387 1 Normally Closed (N.C.) Contact Block 12 132395 1 Normally Closed (N.C.) Contact Block with Base
9
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 12
10
Main Door Switch
As of October 24, 1997
Illus. No. Part No. Qty. Description
1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw 2 152013 2 #6-32 Hex Nut 3 153010 2 #6 Star Washer 4 137005 1 Single Pole Door Switch 5 150443 4 1/4-20 x 3/4” Stainless Steel Cap Screw 6 881687 1 White Main Door Switch Housing ONLY
881695 1 Blue Main Door Switch Housing ONLY 881702 1 White Main Door Switch with Housing Assembly
(includes illus. nos. 1 through 4 and 6)
881700 1 Blue Main Door Switch with Housing Assembly
(includes illus. nos. 1 through 4 and 6) 7 150443 2 1/4-20 x 3/4” Stainless Steel Cap Screw 8 881441 1 White Bottom Hinge Block
881735 1 Blue Bottom Hinge Block
9 881440 1 White Top Hinge Block
881736 1 Blue Top Hinge Block
10 153031 1 Nylon Washer
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 13
Main Door Switch
Prior to October 24, 1997
11
Illus. No. Part No. Qty. Description
1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw 2 152013 2 #6-32 Hex Nut 3 153010 2 #6 Star Washer 4 137005 1 Single Pole Door Switch 5 150443 4 1/4-20 x 3/4” Stainless Steel Cap Screw 6 881726 1 White Main Door Switch Housing ONLY
881727 1 Blue Main Door Switch Housing ONLY 881698 1 White Main Door Switch with Housing Assembly
(includes illus. nos. 1 through 4 and 6)
881699 1 Blue Main Door Switch with Housing Assembly
(includes illus. nos. 1 through 4 and 6) 7 150443 2 1/4-20 x 3/4” Stainless Steel Cap Screw 8 881441 1 White Bottom Hinge Block
881735 1 Blue Bottom Hinge Block
9 881440 1 White Top Hinge Block
881736 1 Blue Top Hinge Block
10 153031 1 Nylon Washer
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 14
12
Lint Door Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 15
Lint Door Assembly
Illus. No. Part No. Qty. Description
1 882115 1 White Lint Door Assembly ONLY
(includes illus. nos. 1 and 2)
881724 1 White Lint Door and Panel Assembly for models with Knob Latch
(includes illus. nos. 1, 2, and 6)
882114 1 Blue Lint Door Assembly ONLY
(includes illus. nos. 1 and 2)
881811 1 Blue Lint Door and Panel Assembly for models with Knob Latch
(includes illus. nos. 1, 2, and 6)
881725 1 White Lint Door Assembly for models with Door Lock
(includes illus. nos. 1, 2, and 6)
881812 1 Blue Lint Door Assembly for models with Door Lock
(includes illus. nos. 1, 2, and 6) 2 117605 6 1/4” Noise Suppressor Tape (sold by the foot) 3 800150 1 Knob Latch Kit
(includes illus. nos. 3 and 4) 4 160009 1 Lock Cam ONLY 5 160001 1 Lint Door Lock with Key 6 881723 1 White Lint Door Front Panel
881810 1 Blue Lint Door Front Panel 7 150309 11 #10-16 x 1/2” Hex Head TEK Crimptite Screw 8 122116 1 Normally Open (N.O.) Lint Door Switch - 24 VAC 9 300400 1 Lint Door Switch Bracket 10 390136 1 Lint Door Switch Bracket Cover 11 150301 2 #8 x 7/16” Phillips Pan Head TEK Screw 12 --------- 1 Sensor Bracket
(refer to Sensor Bracket Assembly on page 5)
13 824807 1 Rotational Sensor Assembly 14 881734 1 Lint Screen (15-7/8” x 37”) with foam gasket
For models mfd. as of August 22, 1997
881733 1 Lint Screen (16-3/8” x 37”) with foam gasket
For models mfd. prior to August 22, 1997 15 115900 3 Drive Wheel Felt 16 152000 12 Pop Rivet 17 102358 1 Wrapper Gasket
13
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 16
14
Basket (Tumbler) Assembly
Illus. No. Part No. Qty. Description
1 882100 4 Basket (Tumbler) Side
170068 4 Stainless Steel Basket (Tumbler) Side
2 881722 1 Basket (Tumbler) Assembly
(includes illus. nos. 1 through 3)
881703 1 Basket (Tumbler)
(includes illus. nos. 2, 4, and 5)
881721 1 Stainless Steel Basket (Tumbler) Assembly
(includes illus. nos. 1 through 3)
881767 1 Stainless Steel Basket (Tumbler)
(includes illus. nos. 2, 4, and 5) 3 150123 40 1/4-20 x 1/4” Socket Button Head Screw 4 102102 1 Rotational Sensor Magnet 5 154200 1 5/32” Pop Rivet
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 17
Front Thruster Wheel Assembly
Between September 15, 1997 and April 6, 1998
15
Illus. No. Part No. Qty. Description
1 150220 2 3/8-24 Hex Nut
(for models with 3/8” Hardware)
152004 2 5/16” Hex Nut
(for models with 5/16” Hardware) 2 150501 2 5/16-18 x 3/4” Hex Head Machine Bolt 3 882096 2 Front Thruster Wheel Bracket 4 -------- 2 Front Thruster Wheel Assembly Complete (discontinued)
Use wheel assembly on page 19
-------- 2 Front Thruster Wheel with hardware (includes illus. nos. 1, 4, and 5)
Use wheel assembly on page 19 5 153001 2 5/16” Flat Washer 6 154277 2 5/16” x 3/8” Shoulder Bolt
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 18
16
Front Thruster Wheel Assembly
Prior to September 15, 1997
Illus. No. Part No. Qty. Description
1 152004 1 5/16” Hex Nut 2 150501 2 5/16-18 x 3/4” Hex Head Machine Bolt 3 882097 1 Front Thruster Wheel Bracket 4 881758 1 Front Thruster Wheel Assembly
180046 1 Front Thruster Wheel ONLY
5 153001 1 5/16” Flat Washer
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 19
Rear Thruster Wheel Assembly
Between September 15, 1997 and April 6, 1998
17
Illus. No. Part No. Qty. Description
1 154277 1 5/16” x 3/8” Shoulder Bolt 2 -------- 1 Rear Thruster Wheel with hardware (use wheel assembly on page 20) 3 153001 2 5/16” Flat Washer 4 150220 2 3/8-24 Hex Nut
(for models with 3/8” Hardware)
152004 2 5/16” Hex Nut
(for models with 5/16” Hardware)
5 881752 1 White Rear Thruster Wheel Cover
881753 1 Blue Rear Thruster Wheel Cover
6 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 20
18
Rear Thruster Wheel Assembly
Prior to September 15, 1997
Illus. No. Part No. Qty. Description
1 152004 1 5/16” Hex Nut 2 153001 1 5/16” Flat Washer 3 180046 1 Rear Thruster Wheel ONLY 4 881752 1 White Rear Thruster Wheel Cover
881753 1 Blue Rear Thruster Wheel Cover
5 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 21
Front Thruster Wheel Assembly
As of April 6, 1998
19
Illus. No. Part No. Qty. Description
1 150220 1 3/8-24 Hex Nut 2 150501 2 5/16-18 x 3/4” Hex Head Machine Bolt 3 882096 1 Front Thruster Wheel Bracket 4 881720 1 Front Thruster Wheel Assembly (includes illus. nos. 1 and 3 through 5)
881988 1 Front Thruster Wheel ONLY (includes illus. nos. 1, 4, and 5)
5 153001 1 5/16” Flat Washer
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 22
20
Rear Thruster Wheel Assembly
As of April 6, 1998
Illus. No. Part No. Qty. Description
1 150220 1 3/8-24 Hex Nut 2 153001 1 5/16” Flat Washer 3 881988 1 Front Thruster Wheel ONLY (includes illus. nos. 1 through 3) 4 881752 1 White Rear Thruster Wheel Cover
881753 2 Blue rear Thruster Wheel Cover 5 150301 4 #8-18 x 7/16” Phillips Pan Head Screw 6 150501 2 5/16-18 x 3/4” Hex Head Machine Bolt 7 882096 2 Front Thruster Wheel Bracket
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 23
Idler Shaft Assembly
As of December 15, 1997
21
Illus. No. Part No. Qty. Description
1 881825 1 Idler Shaft Assembly Complete
(includes illus. nos. 1 through 7) For models mfd. as of December 15, 1997
390134 1 Drive Shaft ONLY 2 180037 2 6” Drive Wheel 3 180038 2 1” Taperlock 4 880205 2 1” Pillow Block Bearing 5 152004 4 5/16-18 Hex Nut 6 153002 4 5/16” Lock Washer 7 153001 4 5/16” Flat Washer 8 859008 2 Bearing Bolt Plate Assembly 9 100704 2 1/4” x 1/4” x 1 3/4” Key
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 24
22
Idler Shaft Assembly
Prior to December 15, 1997
Illus. No. Part No. Qty. Description
1 881718 1 Idler Shaft Assembly Complete
(includes illus. nos. 1 through 7) For models mfd. prior to December 15, 1997
390009 1 Idler Shaft ONLY 2 180039 2 6” Wheel 3 180006 2 1” Trantorque 4 100205 2 1” Pillow Block Bearing 5 152004 4 5/16” Hex Nut 6 153002 4 5/16” Lock Washer 7 153001 4 5/16” Flat Washer
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 25
Drive Shaft Assembly
As of December 15, 1997
23
Illus. No. Part No. Qty. Description
1 881826 1 Drive Shaft Assembly Complete (includes illus. nos. 1 through 11)
390154 1 Drive Shaft ONLY 2 180037 2 6” Drive Wheel 3 180038 2 1” Taperlock 4 880205 2 1” Pillow Block Bearing 5 152004 4 5/16”-18 Hex Nut 6 153002 4 5/16” Lock Washer 7 153001 4 5/16” Flat Washer 8 859008 2 Bearing Bolt Plate Assembly 9 100700 1 1/4” x 1/4” x 1 1/16” Key 10 101209 1 9” Pulley 11 100704 2 1/4” x 1/4” x 1 3/4” Key
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 26
24
Drive Shaft Assembly
Prior to December 15, 1997
Illus. No. Part No. Qty. Description
1 881717 1 Drive Shaft Assembly Complete
(includes illus. nos. 1 through 9) For models mfd. prior to December 15, 1997
390008 1 Drive Shaft ONLY 2 180039 2 6” Wheel 3 180006 2 1” Trantorque 4 880205 2 1” Pillow Block Bearing 5 152004 4 5/16” Hex Nut 6 153002 4 5/16” Lock Washer 7 153001 4 5/16” Flat Washer 8 100700 1 1/4” x 1/4” x 1-1/16” Key 9 101209 1 9” Pulley
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 27
Drive Motor Assembly
25
Illus. No. Part No. Qty. Description
1 881715 1 Drive Motor Assembly Complete - 60 Hz
(includes illus. nos. 1 through 7 and 9)
881716 1 Drive Motor Assembly Complete - 50 Hz
(includes illus. nos. 1 through 7 and 9)
859012 1 Drive Motor Mount Assembly ONLY 2 150501 7 5/16-18 x 3/4” Hex Head Machine Bolt 3 153002 11 5/16” Lock Washer 4 153001 11 5/16” Flat Washer 5 181106 1 1/2 HP / 3ø / 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor 6 152004 4 5/16” Hex Nut 7 101132 1 5/8” Bore x 2” Pulley - 60 Hz
101130 1 5/8” Bore x 2-1/2” Pulley - 50 Hz 8 100174 1 AX-53 Cogged Belt - 60 Hz
(for models mfd. as of August 8, 1997)
100151 1 AX-54 Cogged Belt - 60 Hz
(for models mfd. prior to August 8, 1997)
100174 1 AX-54 Cogged Belt - 50 Hz
(for models mfd. as of May 13, 1998)
100175 1 AX-55 Cogged Belt - 50 Hz
(for models mfd. prior to May 13, 1998)
9 150523 1 1/4-20 x 3/4” Hex Washer TEK Screw
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 28
26
Blower (Fan/Impellor) Motor Assembly
Illus. No. Part No. Qty. Description
1 881713 1 Blower (Fan/Impellor) Motor Assembly Complete - 60 Hz
(includes illus. nos. 1 through 9)
881714 1 Blower (Fan/Impellor) Motor Assembly Complete - 50 Hz
(includes illus. nos. 1 through 9)
859039 1 Blower (Fan/Impellor) Motor Slide Assembly ONLY 2 181105 1 3 HP / 3ø / 50/60 Hz Totally Enclosed, Non-Vent (T.E.N.V.) Motor 3 150504 4 5/18-18 x 1” Hex Head Machine Bolt 4 153002 8 5/16” Lock Washer 5 153001 8 5/16” Flat Washer 6 152004 6 5/16” Hex Nut 7 150514 2 5/16-18 X 2-1/4” Hex Bolt 8 101135 1 2B x 5.4 Pulley - 60 Hz
101185 1 2B x 6.2 Pulley - 50 Hz 9 101194 1 1-3/8” x SDS Bushing
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 29
Sail Switch Assembly
27
Illus. No. Part No. Qty. Description
1 319203 1 Sail Switch Mounting Bracket 2 319202 1 Sail Switch Damper (flat) 3 319201 1 Sail Switch Box Cover 4 319200 1 Sail Switch Box 5 154004 1 Twin Speed Nut 6 154002 1 1/8” Push-on Fastener 7 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw 8 150303 2 #4 x 3/4” Pan Head “A” Machine Screw 9 122200 1 Sail Switch ONLY
881706 1 Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 10)
10 105500 1 Sail Switch Actuator Rod
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 30
28
Blower (Fan/Impellor) Wheel Assembly (with Air Jet)
As of July 1, 1998
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 31
Blower (Fan/Impellor) Wheel Assembly (with Air Jet)
As of July 1, 1998
Illus. No. Part No. Qty. Description
1 101215 1 5/8” x SH Bushing 2 101216 1 2B x 4.2 Pulley - 50/60 Hz 3 100240 2 1” Flange Bearing 4 100701 2 3/16” x 3/16” x 1” Key 5 859014 1 Idler Mount - Top 6 390053 1 Impellor (Fan/Blower) Shaft 7 152004 8 5/16-18 Hex Nut 8 859013 1 Impellor (Fan/Blower) Cover 9 153001 12 5/16” Flat Washer 10 153002 12 5/16” Lock Washer 11 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt 12 100615 1 9-15/16” x 5” Squirrel Cage Fan (Impellor/Blower)
881711 1 Blower (Fan/Impellor) Wheel Assembly Complete - 60 Hz
(includes illus. nos. 1 through 14)
881712 1 Blower (Fan/Impellor) Wheel Assembly Complete - 50 Hz
(includes illus. nos. 1 through 14) 13 153050 1 1/2” Flat Washer 14 152012 2 1/2-20 Hex Nut 15* 100149 2 BX-44 Cogged Belt - 60 Hz
100176 2 BX-46 Cogged Belt - 50 Hz 16 143100 2.5” 1/4” Aluminum Tubing 17 143287 1 Tee Fitting 18 143259 2 Bulkhead Fitting 19 143110 9’ 1/4” Poly Flo Tubing 20 882101 1 Air Jet Mounting Plate 21 150309 2 #10-16 x 1/2 Hex Head Crimptite Screw
29
* Replace in matched sets (both belts).
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 32
30
Blower (Fan/Impellor) Wheel Assembly (without Air Jet)
Prior to July 1, 1998
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 33
Blower (Fan/Impellor) Wheel Assembly (without Air Jet)
Prior to July 1, 1998
Illus. No. Part No. Qty. Description
1 101215 1 5/8” x SH Bushing 2 101216 1 2B x 4.2 Pulley - 50/60 Hz 3 100240 2 1” Flange Bearing 4 100701 2 3/16” x 3/16” x 1” Key 5 859014 1 Idler Mount - Top 6 390053 1 Impellor (Fan/Blower) Shaft 7 152004 8 5/16-18 Hex Nut 8 859013 1 Impellor (Fan/Blower) Cover 9 153001 12 5/16” Flat Washer 10 153002 12 5/16” Lock Washer 11 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt 12 100615 1 9-15/16” x 5” Squirrel Cage Fan (Impellor/Blower)
881711 1 Blower (Fan/Impellor) Wheel Assembly Complete - 60 Hz
(includes illus. nos. 1 through 14)
881712 1 Blower (Fan/Impellor) Wheel Assembly Complete - 50 Hz
(includes illus. nos. 1 through 14) 13 153050 1 1/2” Flat Washer 14 152012 2 1/2-20 Hex Nut 15* 100149 2 BX-44 Cogged Belt - 60 Hz
100176 2 BX-46 Cogged Belt - 50 Hz
31
* Replace in matched sets (both belts).
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 34
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
32
Burner Assembly
Page 35
Burner Assembly
Illus. No. Part No. Qty. Description
1 142924 1 1” to 3/4” Reducing Coupling 2 331291 1 Pipe Bracket 3 150309 20 #10-16 x 1/2” Hex Head TEK Crimptite Screw 4 142829 1 3/4” x 20” Nipple 5 141300 1 3/4” Union Shut-off 6 142701 1 3/4” Closed Nipple 7 142601 1 3/4” Union 8 142710 1 3/4” x 4” Nipple 9 142504 1 3/4” x 90º Elbow 10 142734 1 3/4” x 5-1/2” Nipple 11 390125 1 Pipe Bracket 12 140026 1 3/4” 24 VAC Redundant (natural gas) Gas Valve
882098 1 3/4” x 24” VAC Redundant (liquid propane [L.P.] gas) Gas Valves
140411 1 24 VAC Gas Valve Liquid Propane (L.P.) Conversion Kit 13 331291 1 Pipe Bracket 14 141208 1 3-Port Manifold 15* 140836 3 #10 Burner Orifice (natural gas) ONLY
140855 3 #33 Burner Orifice (liquid propane [L.P.] gas) ONLY 16 141123 3 Burner Tube ONLY 17 390124 1 Burner Tube Support ONLY 18 --------- 1 Sail Switch
(refer to Sail Switch Assembly on page 27)
19 390098 1 Burner Box Cover Plate ONLY 20 881597 1 Hot Surface Ignition (HSI) Ignitor 21 128921 1 Hot Surface Ignition (HSI) Flame Sensor 22 150001 2 #6-32 x 1/2” Phillips Round Head Machine Screw 23 151000 2 #6-32 Pal Nut 24 130401 1 330º Hi-Limit ONLY 25 319703 1 Hi-Limit Bracket 26 881709** 1 Natural Gas Burner Assembly Complete
(includes illus. nos. 1 through 14 and 16 through 29) For models mfd. with Natural Gas ONLY
881708** 1 Liquid Propane (L.P.) Gas Burner Assembly Complete
(includes illus. nos. 1 through 14 and 16 through 29)
For models mfd. with Liquid Propane (L.P.) Gas ONLY 881707 1 Burner Box ONLY 881498* 1 Hot Surface Ignition (HSI) L.P. Conversion Kit
27 335031 1 Hot Surface Ignition (HSI) Module Mounting Bracket/Manifold Rest 28 151001 2 #8-32 Pal Nut 29 881797 1 Hot Surface Ignition (HSI) Module II
33
* Consult factory for elevations over 2,000 feet. ** Burner assemblies DO NOT include burner orifices, which must be ordered separately.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 36
34
Reversing Relay Panel Assembly
For 208/230/240/380/416 Volt Models ONLY
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 37
Reversing Relay Panel Assembly
For 208/230/240/380/416 Volt Models ONLY
Illus. No. Part No. Qty. Description
1 132467 1 9-13-Amp Blower Overload (for 208/230/240 volt models Only)
132468 1 4-6-Amp Blower Overload (for 380/416 volt models Only)
2 132445 1 12-Amp 3ø Contactor - 24 VAC 3 150300 2 #10 x 1/2” Hex Washer TEK Screw 4 150008 2 #6-32 x 1-1/4” Phillips Round Head Machine Screw 5 120701 1 4-Position Terminal Block 6 132448 1 Reversing Contactor - 24 VAC 7 132070 1 208-230/240 Volt Transformer ONLY
132082 1 380/416 Volt Transformer ONLY 881763 1 ML Transformer Termination Kit
8 137060 1 Arc Suppressor (A.S.) Board 9 137013 4 Nylon Standoff 10 151000 2 #6-32 Pal Nut 11 152004 1 5/16-18 Hex Nut 12 121012 1 Ground Lug 13 153002 1 5/16” Lock Washer 14 136008 1 Fuse Holder ONLY 15 136057 1 1/2-Amp (Slo Blo) Fuse (for 208/230/240 volt models Only)
136057 2 1/2-Amp (Slo Blo) Fuse (for 380/416 volt models Only)
16 881992 1 Reversing Relay Panel Assembly Complete
(includes illus. nos. 1 through 18)
For 208 volt models ONLY 881991 1 Reversing Relay Panel Assembly Complete
(includes illus. nos. 1 through 18)
For 230/240 volt models ONLY 881701 1 Reversing Relay Panel Assembly Complete
(includes illus. nos. 1 through 18)
For 380/416 volt Models ONLY 323743 1 Relay Panel ONLY
17 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw 18 132457 1 2.6-3.7-Amp Drive Motor Overload (for 208 volt models Only)
132456 1 1.8-2.6-Amp Drive Motor Overload (for 230/240 volt models Only) 132454 1 1.2-1.8-Amp Drive Motor Overload
For 380/416 volt - 50 Hz Models ONLY
For 460 volt - 60 Hz Models ONLY
35
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 38
36
Reversing Relay Panel Assembly
For 460/480 Volt Models ONLY
Illus. No. Part No. Qty. Description
1 132468 1 4-6-Amp Blower Overload (for 460/480 volt models Only) 2 132445 1 12-Amp 3ø Contactor - 24 VAC 3 150300 2 #10 x 1/2” Hex Washer TEK Screw 4 150008 2 #6-32 x 1-1/4” Phillips Round Head Machine Screw 5 120701 1 4-Position Terminal Block 6 132448 1 Reversing Contactor - 24 VAC 7 132067 1 460/480 Volt Transformer 8 137060 1 Arc Suppressor (A.S.) Board 9 137013 4 Nylon Standoff 10 152004 1 5/16-18 Hex Nut 11 121012 1 Ground Lug 12 153002 1 5/16” Lock Washer 13 881615 1 Reversing Relay Panel Assembly Complete
(includes illus. nos. 1 through 17) 881763 1 ML Transformer Termination Kit 323743 1 Relay Panel ONLY
14 151000 2 #6-32 Pal Nut 15 120768 2 Din Rail (sold by the inch) 16 135501 1 1-Amp Double Pole Circuit Breaker 17 132454 1 1.2-1.8-Amp Drive Motor Overload (for 460 volt Models Only)
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 39
Transition Piece Assembly with Damper
As of September 12, 1997
37
Illus. No. Part No. Qty. Description
1 881705 1 White Transition Piece Assembly with Damper Complete
881809 1 Blue Transition Piece Assembly with Damper Complete
2 152014 8 1/4-20 Free Spin Wash Nut
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 40
38
Exhaust Adapter Assembly
Prior to September 12, 1997
Illus. No. Part No. Qty. Description
1 881704 1 White Exhaust Adapter Assembly without Damper
881808 1 Blue Exhaust Adapter Assembly without Damper
2 152014 8 1/4-20 Free Spin Wash Nut
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 41
Pneumatic Valve Assembly
As of July 1, 1998
39
Illus. No. Part No. Qty. Description
1 330987 1 Micro Valve Bracket 2 836002 1 Air Jet Solenoid 3 150111 2 1/4-20 Phillips Machine Screw 4 152014 2 1/4-20 Free Spin Wash Nut 5 151000 2 #6-32 Pal Nut 6 100472 1 1/4” x 1/8” Male Connector 7 150002 2 #6-32 x 1” Phillips Machine Screw 8 100520 1 1/8” N.P.T. Silencer 9 143268 1 1/8” 90º Brass Straight Elbow 10 100472 1 1/4” x 1/8” Male Connector 11 143110 9’ 1/4” Poly Flo Tubing
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 42
ADC 450155 1 - 12/16/97-50 2* 01/15/98-50 3 *05/21/98-50
4 *08/12/98-50 5* 12/23/98-50 6 *03/02/00-50 7 *02/26/02-25
Loading...