American Dryer Corp ML-758 User Manual
ML-758 Parts Manual
Phase 7 / Non-Coin / Dual Timer
with F.S.S. Options
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
www.amdry.com
ADC Part No. 450566-3
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety . If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONL Y qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included
with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to
make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.
POUR VOTRE SÉCURITÉ
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________________________________ MODEL NO. ______________
RESELLER’S NAME _________________________________________________________________________________
Serial Number(s)_____________________________________________________________________________________
ML-758
____________________________________________________________________________________________________
____________________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory . When ordering replacement part s from the
factory , you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department
at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly . The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORT ANT NOTE T O PURCHASER”
Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.
Table of Contents
Phase 7 Non-Coin Microprocessor Control Door Assembly for Models Mfd. as of July 10, 2002..............................4
Dual Timer Non-Coin Control Door Assembly for Models Mfd. as of July 10, 2002 ...................................................5
Phase 7 Non-Coin Microprocessor Control Door Assembly for Models Mfd. prior to July 10, 2002...........................6
Dual Timer Control Door Assembly for Models Mfd. prior to July 10, 2002 ................................................................7
Phase 7 Non-Coin Microprocessor Control Panel Assembly .....................................................................................8
Dual Timer “Tap Touch” Controls................................................................................................................................9
Phase 7 Non-Coin Microprocessor Control Box Assembly ......................................................................................10
Dual Timer Control Box Assembly............................................................................................................................11
37-1/4” Main Door Assembly....................................................................................................................................12
Main Door Switch Assembly.....................................................................................................................................13
Front Panel Assembly ..............................................................................................................................................14
Lint Drawer / Lint Drawer Switch Assembly..............................................................................................................15
Tumbler / Support Assemblies .................................................................................................................................16
Tumbler Bearing Assembly for Models with Setscrew Type Bearings......................................................................17
Tumbler Bearing Assembly for Models with Grip Lock Type Bearings .....................................................................18
Idler Bearing Assembly.............................................................................................................................................19
Non-Reversing Motor Mount Assembly....................................................................................................................20
Reversing T.E.F.C. Motor Mount Assembly ..............................................................................................................22
Sensor Bracket Assemblies .....................................................................................................................................24
Direct Sp ark Ignition Burner Assembly .....................................................................................................................26
Electric Oven Assembly............................................................................................................................................28
Air-Operated Steam Damper Assembly ...................................................................................................................30
Fire Suppression System Assemblies......................................................................................................................31
Single-Phase (1ø) Microprocessor Rear Electric Relay Panel Assembly.................................................................32
208-240V 3-Phase (3ø) Microprocessor Rear Electric Relay Panel Assembly ........................................................33
460-480V Microprocessor Rear Electric Relay Panel Assembly..............................................................................34
208-240V Microprocessor Reversing Rear Electric Relay Panel Assembly.............................................................35
460-480V Microprocessor Reversing Rear Electric Relay Panel Assembly.............................................................36
Single-Phase (1ø) Dual Timer Rear Electric Relay Panel Assembly........................................................................37
460-480V Dual Timer Rear Electric Relay Panel Assembly .....................................................................................38
208-240V Dual Timer Reversing Rear Electric Relay Panel Assembly ....................................................................39
Outer Top / Back Guard Assemblies for Models Mfd. as of January 5, 2003...........................................................40
Outer Top / Back Guard Assemblies for Models Mfd. prior to January 5, 2003........................................................41
Microprocessor Electric Oven Component Application Chart...................................................................................42
Dual Timer Electric Oven Component Application Chart........................................................................... ...............43
Additional Parts Available ......................................................................................................................................... 44
Phase 7 Non-Coin Microprocessor Control Door Assembly
For Models Mfd. as of July 10, 2002
Illus. No. Part No. Qty. Description
1 883576 1 White Non-Coin Control Door
(includes illus. nos. 1 and 3)
2 150321 2 #10-32 x 1/2” Phillips Machine Screw
3 117604 4 Noise Suppression Tape (sold by the foot)
4 150317 2 #10-16 x 3/4” TORX PLUS
150318 1 TORX PLUS® Bit 1/4” (for removal of TORX® head screw)
5 102502 1 Control Door Support Rod
6 154011 2 #10-32 Multi-Thread U-Nut
7 102603 1 Control Door Rod Support Latch
8 102601 1 Control Door Rod Retainer Clip
9 ––––––* 1 Logo ONLY
* Contact reseller for logo.
4 American Dryer Corporation 450566- 3
®
Dual Timer Non-Coin Control Door Assembly
For Models Mfd. as of July 10, 2002
Illus. No. Part No. Qty. Description
1 883616 1 White Non-Coin Control Door
(includes illus. nos. 1 and 3)
2 150321 2 #10-32 x 1/2” Phillips Machine Screw
3 117604 4 Noise Suppression Tape (sold by the foot)
4 150317 2 #10-16 x 3/4” TORX PLUS
150318 1 TORX PLUS® Bit 1/4” (for removal of TORX® head screw)
5 102502 1 Control Door Support Rod
6 154011 2 #10-32 Multi-Thread U-Nut
7 102603 1 Control Door Rod Support Latch
8 102601 1 Control Door Rod Retainer Clip
9 ––––––* 1 Logo ONLY
* Contact reseller for logo.
450566-3 www.amdry.com 5
®
Phase 7 Non-Coin Microprocessor Control Door Assembly
For Models Mfd. prior to July 10, 2002
Illus. No. Part No. Qty. Description
1 824254 1 Phase 7 Control Door without Hinge
2 117604 2 Noise Suppression Tape (sold by the foot)
3 150314 4 #10-32 x 1/2” TORX
150318 1 TORX PLUS
4 154011 4 #10-32 Multi-Thread U-Nut
5 112366 1 Milnor Logo
6 American Dryer Corporation 450566- 3
®
®
Bit 1/4” (for removal of TORX® head screw)
Screw
Dual Timer Control Door Assembly
For Models Mfd. prior to July 10, 2002
Illus. No. Part No. Qty. Description
1 ––––––* 1 Logo ONLY
2 883733 1 White Control Door Assembly
(includes illus. nos. 2, 3, and 8)
3 117604 4 Noise Suppression Tape (sold by the foot)
4 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw
5 102603 1 Control Door Rod Support Catch
6 102601 1 Control Door Rod Retainer Clip
7 102502 1 Control Door Support Rod
8 882541 2 Spring Turn Latch (2-piece)
* Contact reseller for logo.
450566-3 www.amdry.com 7
Phase 7 Non-Coin Microprocessor Control Panel Assembly
Illus. No. Part No. Qty. Description
1 112577 1 Phase 7 Non-Coin Keypad
2 850984 1 Phase 7 Non-Coin Microprocessor Controller (computer) Panel ONLY
3 887004 1 Phase 7.2.2 Board with Fire Suppression System and H
887001 Phase 7.2.2 Board with Fire Suppression System and no H
O (pressure) Switch
2
O (pressure) Switch
2
887024 Phase 7.2.2 Board without Fire Suppression System
4 150005 2 #6-32 x 3/4” Phillips Round Head Machine Screw
5 153010 2 #6 Star Washer
6 136097 1 500 mA Fuse
7 136016 1 5-Amp Fuse
8 American Dryer Corporation 450566- 3
Dual Timer “Tap Touch” Controls
Illus. No. Part No. Qty. Description
1 124030 1 15 Minute Timer – 24 VAC
2 124025 1 60 Minute Timer – 24 VAC
3 824175 1 Red Pilot Light – 24 VAC
4 122301 1 “Tap Touch” Switch
5 131932 3 Relay SPST 24v
6 120730 1 30-Position Terminal Block
7 151000 6 #6-32 Pal Nut
8 882903 1 Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
850392 — Dual Timer Panel ONLY
9 153010 2 #6 Star Washer
10 152000 3 #6-32 Hex Nut
11 150207 2 #10-24 x 1/2” Phillips Pan Head Machine Screw
12 150110 4 #8-32 x 1/2” Phillips Round Head Machine Screw
13 112563 1 Dual Timer Panel Overlay
14 124104 1 Pure Touch Knob with Red Pointer
15 124105 1 Pure Touch Knob with Blue Pointer
450566-3 www.amdry.com 9
Phase 7 Non-Coin Microprocessor Control Box Assembly
Illus. No. Part No. Qty. Description
1 122681 1 10-Pin Connector
2 122676 1 8-Pin Connector
3 122646 1 2-Pin Connector
4 122683 1 6-Pin Connector
5 122640 1 9-Pin Connector
6 122706 * #20-16 Socket
7 122669 * Female Crimp Terminal
* As needed.
10 American Dryer Corporation 450566- 3
Dual Timer Control Box Assembly
Illus. No. Part No. Qty. Description
1 122641 1 15-Pin Connector
2 122706 15 Socket Terminal
122801 1 Pin / Socket Extraction Tool
3 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
4 884252 1 Reversing Timer 24 Volt (for reversing dual timer models Only)
450566-3 www.amdry.com 11
37-1/4” Main Door Assembly
Illus. No. Part No. Qty. Description
1 835128 1 Main Door Hinge
(for models mfd. as of February 18, 2005)
881685 1 Main Door Hinge
(for models mfd. prior to February 18, 2005)
2 314729* 1 Main Door Handle
3 102357 1 Door Gasket
170731 1 Black Adhesive (10.3 oz. cartridge)
170830 1 White Adhesive (10.3 oz. cartridge)
4 102221 1 Door Glass
170731 1 Black Adhesive (10.3 oz. cartridge)
170730 1 White Adhesive (10.3 oz. cartridge)
5 152014 6 1/4-20 Free Spin Wash Nut
6 150683 6 1/4-20 x 5/8” Carriage Bolt
7 801600 1 Main Door Assembly Complete
(for models mfd. as of September 11, 2006)
835003 1 Main Door Assembly Complete
(for models mfd. between February 18, 2005 and September 11, 2006)
881689 1 Main Door Assembly Complete
(for models mfd. prior to February 18, 2005)
8 185522 2 Main Door Magnet Bracket
(for models mfd. as of September 11, 2006)
* Specify color when ordering.
12 American Dryer Corporation 450566- 3
Main Door Switch Assembly
Illus. No. Part No. Qty. Description
1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Single-Pole Door Switch
5 150445 4 1/4-20 x 3/4” Cap Screw
6 882866 1 Main Door Switch Housing (black)
881687 1 Main Door Switch Housing (white)
883338 1 Main Door Switch with Housing Assembly (black)
(includes illus. nos. 1 through 4 and 6)
881702 1 Main Door Switch with Housing Assembly (white)
(includes illus. nos. 1 through 4 and 6)
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
8 881151 1 Bottom Hinge Block (black)
(includes illus. nos. 5, 8, and 10)
881441 1 Bottom Hinge Block (white)
(includes illus. nos. 5, 8, and 10)
9 881152 1 Top Hinge Block (black)
(includes illus. nos. 5 and 9)
881440 1 Top Hinge Block (white)
(includes illus. nos. 5 and 9)
10 153031 1 Nylon Washer
450566-3 www.amdry.com 13
Front Panel Assembly
Illus. No. Part No. Qty. Description
1* 801604 1 Front Panel Assembly
(for models mfd. as of September 11, 2006)
(includes illus. nos. 1, 7, and 8)
883703 1 Front Panel Assembly
(for models mfd. prior to September 11, 2006)
(includes illus. nos. 1, 5, and 6)
2 150313 11 #10-16 x 1/2” TORX PLUS
®
150318 1 25 IP TORX PLUS® Bit 1/4 Hex (for removal of TORX® head screw)
3 –––––– 1 Main Door Hinge Block Assembly
(refer to Main Door Switch Assembly on page 13)
4 –––––– 1 Lint Drawer Switch
(refer to Lint Drawer / Lint Drawer Switch Assembly on page 15)
5 881987 1 Friction Door Latch Kit
(includes illus. nos. 5 and 6)
6 154215 2 5/32” Pop Rivet
7 102004 2 0.750 Round Door Magnet
8 152223 2 1/2” TORX
* Specify color when ordering.
®
Head Screw
14 American Dryer Corporation 450566- 3
Loading...