American Dryer Corp ML-190 User Manual

ML-190

Parts Manual

2001

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: [phone] / Fax: [phone]

E-mail: [e-mail]

www.amdry.com

ADC Part No. 450409- 6

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety . If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONL Y qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included
with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to
make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.

POUR VOTRE SÉCURITÉ

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________________________________ MODEL NO. ______________

RESELLER’S NAME _________________________________________________________________________________

Serial Number(s)_____________________________________________________________________________________

ML-190

____________________________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory . When ordering replacement part s from the
factory , you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department
at [phone]. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly . The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORT ANT NOTE T O PURCHASER”

Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.

Table of Contents

Control Door Assembly .................................................................................................................4

Microprocessor Control Panel Assembly .......................................................................................5

Front Panel / Main Door Assemblies .............................................................................................6

Main Door Switch..........................................................................................................................7

Tumbler Assembly.........................................................................................................................8

Lint Door Assembly .......................................................................................................................9

Lint Drawer / Lint Drawer Switch Box Assemblies........................................................................10

Rear Wheel and Tumbler Support Assembly for Models Mfd. as of March 31, 2000 ..................... 11

Tumbler Bearing / Rotational Sensor Assemblies for Models Mfd. prior to March 31, 2000 ..........12

Idler Shaft Assembly....................................................................................................................13

Drive Shaft Assembly ..................................................................................................................14

Speed Reducer Shaf t Assembly..................................................................................................15

Microprocessor T emperature Sensor Bracket Assembly .............................................................16

T otally Enclosed, Non-V enting Drive Motor Assembly...................................................................17

Blower Motor Mount Assembly ....................................................................................................18

Fan (Squirrel Cage) Shaft Mount Assembly .................................................................................19

Direct Sp ark Ignition Gas Burner Assembly .................................................................................20

Hot Surface Ignition Burner Assembly ..........................................................................................22

Sail Switch Assembly ..................................................................................................................24

Steam Damper Assembly............................................................................................................25

T op Console Assembly................................................................................................................26

Pneumatic V alve Assembly for Gas Models ONLY.......................................................................27

Pneumatic V alve Assembly for Steam Models ONL Y ...................................................................28

Air Jet Assembly .........................................................................................................................29

Microprocessor Reversing Contactor Mounting Panel Assembly .................................................30

Back Guard Assemblies..............................................................................................................32

Control Door Assembly

Illus. No. Part No. Qty . Description

1 882439 1 Control Door Assembly (white)

(includes illus. nos. 1 and 2)

882440 1 Control Door Assembly (coral wrinkle blue)

(includes illus. nos. 1 and 2)
2 882541 2 Spring Turn Latch (2-piece)
3 117603 5 Noise Suppressor Tape (sold by the foot)
4 150309 9 #10-16 x 1/2” Hex Head TEK Crimptite Screw
5 102603 1 Control Door Support Rod Catch
6 102601 1 Control Door Rod Retainer Clip
7 102505 1 Control Door Support Rod
8 112368 1 Logo ONLY

4 American Dryer Corporation 450409 -6

Microprocessor Control Panel Assembly

Illus. No. Part No. Qty . Description

1 112537 1 Phase 6 Non-Coin Keypad

112276 1 Non-Coin Stick-On Label

(English ONLY) … Not Illustrated

112275 1 Non-Coin Stick-On Label

(Spanish, Italian, and Hebrew) … Not Illustrated

112277 1 3-Language Non-Coin Stick-On Label

(English, Spanish, and Hebrew) … Not Illustrated

112278 1 5-Language Non-Coin Stick-On Label

(Italian, Dutch, French, German, and Chinese) … Not Illustrated

2 881635 1 Computer Door Complete

(includes illus. nos. 1 through 10)

881633 1 Computer Door ONLY
3 137124 1 Phase 6 Non-Coin Reversing Microprocessor Controller (with air jet) ONLY
4 150005 2 #6-32 x 1/4” Phillips Round Head Screw
5 153010 2 #6 Star Washer
6 150000 3 #6-32 x 1/4” Slotted Round Head Machine Screw
7 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
8 136048 1 1/8-Amp (Slo-Blo) Fuse ONLY
9 136017 1 3.15-Amp Fuse ONLY
10 136019 1 1-Amp Fuse ONLY

450409 -6 www.amdry.com 5

Front Panel / Main Door Assemblies

Illus. No. Part No. Qty . Description

1 881685 1 Main Door Hinge (white)

882296 1 Main Door Hinge (coral wrinkle blue)

2 881740 6 1/4-20 x 5/8” Carriage Bolt (white)

882339 6 1/4-20 x 5/8” Carriage Bolt (coral wrinkle blue)
3 151012 4 #10-32 Nylon Acorn Nut (white)
4 881688 1 Main Door Handle (white)
5 102214 1 30” Door Glass

170730 1 Door Glass Adhesive (10.3 oz. cartridge)
6 881806 6 1/4-20 Free Spin Wash Nut (white)

882293 6 1/4-20 x 5/8” Free Spin Wash Nut (coral wrinkle blue)
7 150120 1 Main Door Latch Screw (#10-32 dome hex head screw)
8 151010 1 #10-32 Acorn Nut
9 881968 1 Main Door Assembly Complete (white)

(includes illus. nos. 2 through 10)

882292 1 Cold Rolled Steel Main Door Assembly (coral wrinkle blue)

(includes illus. nos. 2 through 10)
881966 1 Main Door Ring (white)
882305 1 Cold Rolled Steel Large Main Door Ring (coral wrinkle blue)

10 102357 1 Extruded Steel Door Gasket
11 882437 1 Front Panel Assembly (white)

(includes illus. nos. 1, 12, and 13)
882438 1 Front Panel Assembly (coral wrinkle blue)

(includes illus. nos. 1, 12, and 13)

12 170330 1 Friction Door Latch
13 154215 2 5/32” Pop Rivet
14 122351 1 “EMERGENCY STOP” (E-Stop) Push-Pull Button
15 122419 1 “EMERGENCY STOP” (E-Stop) Nameplate
16 132387 1 Normally Closed (N.C.) Contact Block
17 132395 1 Normally Closed (N.C.) Contact Block with Base

6 American Dryer Corporation 450409 -6

Main Door Switch

Illus. No. Part No. Qty . Description

1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Single-Pole Door Switch
5 150443 4 1/4-20 x 3/4” Stainless Steel Cap Screw
6 881687 1 Main Door Switch Housing ONLY (white)

882291 1 Main Door Switch Housing ONLY (coral wrinkle blue)
881702 1 Main Door Switch with Housing Assembly (white)

(includes illus. nos. 1 through 4 and 6)

882298 1 Main Door Switch with Housing Assembly (coral wrinkle blue)

(includes illus. nos. 1 through 4 and 6)
7 150201 2 #10-32 x 1/4” Phillips Pan Head Tap Zinc
8 881441 1 Bottom Hinge Block (white)

882283 1 Bottom Hinge Block (coral wrinkle blue)

9 881440 1 Top Hinge Block (white)

882284 1 Top Hinge Block (coral wrinkle blue)

10 153031 1 Nylon Washer

450409 -6 www.amdry.com 7

Tumbler Assembly

Illus. No. Part No. Qty . Description

1 819042 1 Tumbler Assembly

(includes illus. nos. 1 through 3)
2 170156 4 Tumbler Perforated Side
3 150123 48 1/4-20 x 1/4” Socket Button Head Cap Screw
4 881619 1 Rotational Sensor Magnet

8 American Dryer Corporation 450409 -6

Lint Door Assembly

Illus. No. Part No. Qty . Description

1 882443 1 Lint Door Assembly (white)

(includes illus. nos. 1, 2, and 4)

882444 1 Lint Door Assembly (coral wrinkle blue)

(includes illus. nos. 1, 2, and 4)
2 117605 5 Neoprene Sponge Tape (sold by the foot)
3 150309 5 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 117604 9 Neoprene Sponge Tape (sold by the foot)

450409 -6 www.amdry.com 9

Lint Drawer / Lint Drawer Switch Box Assemblies

Illus. No. Part No. Qty . Description

1 882449 1 Lint Drawer Assembly Complete (white)

882450 1 Lint Drawer Assembly Complete (coral wrinkle blue)
2 820925 1 Lint Screen Assembly ONLY
3 122116 1 Lint Drawer Switch ONLY
4 122605 2 4-Pin Socket Connector
5 122701 8 Socket Terminal ONLY

122801 1 Pin / Socket Extraction Tool
6 835310 1 Lint Drawer Switch Box Assembly Complete

(includes illus. nos. 3 through 6)
7 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
8 122700 8 Pin Terminal ONLY
9 122604 2 4-Pin Connector
10 150300 2 #10-16 x 1/2” Hex Washer TEK
11 319076 1 Right Hand Divider Panel
12 319077 1 Left Hand Divider Panel
13 150300 14 #10-16 x 1/2” Hex Washer TEK

10 American Dryer Corporation 450409 -6

Rear Wheel and Tumbler Support Assembly

For Models Mfd. as of March 31, 2000

Illus. No. Part No. Qty . Description

1 835339 1 Tumbler Shaft Support Bracket
2 102394 2 1/8” Thick VHMW Polyethylene
3 153005 6 3/8” Split Lock Washer
4 150600 2 3/8” 16 x 1.5 hhmb
5 153004 8 3/8” x 100 Flat Washer
6 180018 2 4” Diameter x 1-1/2” Wide Hi-Impact Wheel
7 819046 1 Tumbler Support Adjustment Plate
8 819065 1 Tumbler Support Shoulder Screw
9 815960 1 Rotational Sensor Assembly

450409 -6 www.amdry.com 11

Tumbler Bearing / Rotational Sensor Assemblies

For Models Mfd. prior to March 31, 2000

Illus. No. Part No. Qty . Description

1 100244 1 1-15/16” Tumbler Bearing
2 153011 4 9/16” Flat Washer
3 153025 4 9/16” Lock Washer
4 152050 4 9/16-12 Hex Nut
5 319065 1 Rotational Sensor Mounting Bracket
6 815960 1 Rotational Sensor Assembly
7 319016 1 Back Guard
8 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw
9 100817 1 1-15/16” Retaining Ring

12 American Dryer Corporation 450409 -6

Idler Shaft Assembly

Illus. No. Part No. Qty . Description

1 319062 1 Idler Shaft

882461 1 Idler Shaft Assembly

(includes illus. nos. 1 and 4)
2 821465 1 11” Wheel and Hub
3 101227 1 1-1/2” Taper Lock
4 880217 2 1-1/2” Pillow Block Bearing
5 152011 4 1/2-13 Hex Nut
6 153026 4 1/2” Lock Washer
7 153050 4 1/2” Flat Washer
8 819015 2 Bearing Bolt Plate Assembly
9 100704 1 1/4” x 1/4” x 1-3/4” Key

450409 -6 www.amdry.com 13

Drive Shaft Assembly

Illus. No. Part No. Qty . Description

1 319062 1 Tumbler Shaft

882461 1 Tumbler Shaft Assembly

(includes illus. nos. 1 and 4)
2 821465 1 11” Drive Wheel
3 101227 1 1-1/2” Bushing
4 880217 2 1-1/2” Pillow Block Bearing
5 152011 4 1/2-13 Hex Nut
6 153026 4 1/2” Lock Washer
7 153050 4 1/2” x 1-1/16” Flat Washer
8 819015 2 Bearing Backing Plate
9 10115 0 1 1” Bushing with Setscrew
10 101 189 1 2B x 8.0 Pulley
11* 100193 2 BX-45 Cogged Belt
12 100804 2 1-1/2” Retaining Ring

* Replace in matched sets (both belts).

14 American Dryer Corporation 450409 -6

Speed Reducer Shaft Assembly

Illus. No. Part No. Qty . Description

1 319062 1 Speed Reducing Shaft

882461 1 Speed Reducing Shaft Assembly

(includes illus. nos. 1 and 4)
2 101160 1 2B x 3.4” Pulley
3 101150 1 1-1/2” Bushing with Setscrew
4 880217 2 1-1/2” Pillow Block Bearing
5 152011 4 1/2-13 Hex Nut
6 153026 4 1/2” Lock Washer
7 153050 4 1/2” Flat Washer
8 819015 2 Bearing Back Up Plate
9 100710 1 3/8” x 3/8” x 3” Key
10 101193 1 2B x 13.6” Pulley
11* 100128 2 BX-50 Belt
12* 100193 2 BX-45 Cogged Belt
13 101230 1 1-1/2” Bushing with Setscrew and Key
14 –––––– 1 Comes with Bushing P/N: 101230

* Replace in matched sets (both belts).

450409 -6 www.amdry.com 15

Microprocessor Temperature Sensor Bracket Assembly

Illus. No. Part No. Qty . Description

1 815931 1 Microprocessor Temperature Sensor Bracket Complete

(includes illus. nos. 1 through 10)

820967 1 Microprocessor Temperature Sensor Bracket ONLY
2 150005 2 #6-32 x 1/4” Round Head Machine Screw
3 153010 2 #6 Star Washer
4 130302 1 225° Manual Reset Thermostat ONLY
5 152000 2 #6-32 Hex Nut
6 121028 2 1/4” x .032 Insulated Terminal
7 122701 4 Socket Terminal ONLY
8 122605 1 4-Pin Socket Connector
9 154007 2 1/4” Push-On Fastener
10 880251 1 1/4” Temperature Sensor Probe Assembly

(includes illus. nos. 6 through 10)

11 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw

16 American Dryer Corporation 450409 -6

Totally Enclosed, Non-Venting Drive Motor Assembly

Illus. No. Part No. Qty . Description

1 835297 1 Motor Adjustment Plate
2 150501 4 5/16-18 x 3/4” Hex Head Tap Bolt
3 153002 8 5/16” Lock Washer
4 153001 8 5/16” Flat Washer
5 100043 1 3 hp 208-230/460v (3ø) 60 Hz Totally Enclosed, Non-Venting Motor

380-416v (3ø) 50 Hz Totally Enclosed, Non-Venting Motor

181019 1 3 hp 575v (3ø) 60 Hz Totally Enclosed, Non-Venting Motor
6 152004 4 5/16” Hex Nut
7 101235 1 2MB35 x 1-1/8” Pulley

101132 1 5/8” Bore x 2.0” Pulley
8* 100128 2 BX-50 V-Belt
9** –––––– 1 5/16” Key
10 150619 2 3/8-16 x 3” Tap Bolt
11 152005 4 3/8-16 Hex Nut

* Replace in matched sets (both belts).
** Consult factory.

450409 -6 www.amdry.com 17

Blower Motor Mount Assembly

Illus. No. Part No. Qty . Description

1 181030* 1 7-1/2 hp 208-230/460v (3ø) 60 Hz Motor ONLY

181039 1 7-1/2 hp 575v (3ø) 60 Hz Motor
2 101147 1 2B x 4.0 Motor Pulley (60 Hz Only)
3 10115 2 1 SH x 1-3/8” Bushing
4 100706 1 5/16” x 5/16” x 1-3/8” Key
5 152004 4 5/16-18 Hex Nut
6 153002 4 5/16” Lock Washer
7 153001 4 5/16” Flat Washer
8 821091 1 Motor Mount Adjustment Plate ONLY
9 153001 4 5/16” Flat Washer
10 153002 4 5/16” Lock Washer
11 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
12 152004 4 5/16-18 Hex Nut
13 150503 2 5/16-18 x 2” Hex Head Machine Bolt
14 332322 1 Motor Mount Adjustment Angle ONLY
15 153001 2 5/16” Flat Washer
16 153002 2 5/16” Lock Washer
17 150501 2 5/16-18 x 3/4” Hex Head Machine Bolt
18** 100159 2 BX-61 Cogged Belt

* Specify voltage when ordering.
** Replace in matched sets (both belts).

18 American Dryer Corporation 450409 -6

Fan (Squirrel Cage) Shaft Mount Assembly

Illus. No. Part No. Qty . Description

1 100612 1 1-1/4” Bore x 15” Diameter x 6” Blower / Fan (squirrel cage)
2 821078 1 Fan Shaft Mount Assembly Complete

(includes illus. nos. 1 through 19)

821073 1 Fan Shaft Mount ONLY
3 117604 4 Neoprene Sponge Tape (sold by the foot)
4 152006 2 1/2-20 Left Hand Jam Nut
5 153065 1 1/2” Flat Washer
6 882930 1 Fan Shaft Assembly

(includes illus. nos. 6 through 12)
7 881061 1 1-3/8” Flange Bearing with Setscrews and Grease Fitting
8 153004 4 3/8” Flat Washer
9 153005 4 3/8” Lock Washer
10 152005 4 3/8-16 Hex Nut
11 100812 2 1-3/8” Retaining Ring
12 880879 1 1-3/8” Pillow Block Bearing ONLY
13 153004 2 3/8” Flat Washer
14 153005 2 3/8” Lock Washer
15 150617 2 3/8-16 x 1” Hex Head Bolt
16 10 1135 1 2B x 5.4 SDS Pulley (for gas models Only)
17* 100159 2 BX-61 Cogged Belt (fan shaft to blower motor) for 60 Hz Models ONLY
18 100706 1 5/16” x 5/16” x 1-3/8” Key
19 10119 4 1 SDS x 1-3/8” Bushing ONLY

* Replace in matched sets (both belts).

450409 -6 www.amdry.com 19

Direct Spark Ignition Gas Burner Assembly

20 American Dryer Corporation 450409 -6

Direct Spark Ignition Gas Burner Assembly

Illus. No. Part No. Qty . Description

1 142929 1 1-1/2” to 1” Reducing Coupling
2 332117 1 Pipe Bracket
3 150309 33 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 142583 1 1” x 40” Nipple
5 882537 1 Flame-Probe Wire
6 142808 1 1” x 3” Nipple
7 142602 1 1” Union
8 152013 2 #6-32 Hex Nut
9 142507 1 1” x 90° Street Elbow
10 882451 1 Direct Spark Ignition Ignitor / Flame-Probe with High Voltage Wire
11 332487 1 Gas Pipe Bracket Straight Extended
12 140017 1 1” 24 VAC Redundant Gas Valve (natural gas)

140018 1 Liquid Propane Conversion Kit for 1” Valve
13 319014 1 Adjustable Gas Pipe Bracket
14 141239 1 1” 4-Port Manifold with 2” Nipple
15* 140840 4 #1 Burner Orifice (natural gas Only)

140821 4 #28 Burner Orifice (liquid propane Only)
16 390169 1 Direct Spark Ignition Mount Manifold Rest
17 14 1110 4 Burner Tube
18 332121 1 Burner Tube Support
19 802801 1 Sail Switch

(refer to Sail Switch Assembly on page 24)
20 332113 1 Burner Box Cover Plate
21 331290 1 Ignitor / Flame-Probe Sight Hole Disc
22 151000 2 #6-32 Pal Nut
23 130201 1 330° Manual Reset Hi-Limit ONLY
24 150005 2 #6-32 x 1/4” Round Head Machine Screw
25 821457 1 Burner Hi-Limit Bracket
26 128935 1 Johnson Direct Spark Ignition Module (3 tries)
27 332256 1 Large Dryer Liquid Propane Burner Baffle (liquid propane models Only)
28 153562 2 #6-32 x 3/4” Clinch Stud
29 819066 1 Burner Assembly Complete (natural gas Only)

819067 1 Burner Assembly Complete (liquid propane gas Only)
820904 1 Burner Box ONLY

* Consult factory for elevations over 2,000 feet.

450409 -6 www.amdry.com 21

Hot Surface Ignition Burner Assembly

22 American Dryer Corporation 450409 -6

Hot Surface Ignition Burner Assembly

Illus. No. Part No. Qty . Description

1 142929 1 1-1/2” to 1” Reducing Coupling
2 332117 1 Pipe Bracket
3 150309 33 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 142817 1 1” x 28-1/2” Pipe
5 141302 1 1” Union Shutoff
6 142724 1 1” x 2” Nipple
7 142602 1 1” Union
8 142581 2 1” x 5” Nipple
9 142548 1 1” x 90° Elbow
10 881597 1 Hot Surface Ignitor
11 332487 1 Gas Valve Pipe Bracket
12 140017 1 1” x 1” 24 VAC Redundant (natural gas) Gas Valve ONLY

140018 1 Liquid Propane Conversion for 1” Valve
13 319014 1 Gas Valve Pipe Bracket
14 141239 1 4-Port Manifold ONLY
15* 140840 4 #1 Burner Orifice (natural gas) ONLY

140821 4 #28 Burner Orifice Liquid Propane Gas ONLY
16 390169 1 Hot Surface Ignition Module Mounting Bracket / Manifold Rest
17 14 1110 4 Burner Tube ONLY
18 332121 1 Burner Tube Support ONLY
19 –––––– 1 Sail Switch

(refer to Sail Switch Assembly on page 24)
20 390170 1 Hot Surface Ignition Burner Box Cover Plate ONLY
21 331290 1 Sight Hole Disc ONLY
22 128921 1 Hot Surface Ignition Flame Sensor
23 151000 2 #6-32 Pal Nut
24 130201 1 330° Manual Reset Hi-Limit ONLY
25 150005 2 #6-32 x 1/2” Phillips Round Head Machine Screw
26 835152** 1 Natural Gas Burner Assembly Complete Less Orifices

(includes illus. nos. 1 through 29)

819062 – Liquid Propane Burner Assembly Complete Less Orifices

(includes illus. nos. 1 through 29)

820904 1 Burner Box ONLY
27 821457 1 Hi-Limit Mounting Bracket ONLY
28 881797 1 Hot Surface Ignition Module II
29 151001 2 #8-32 Pal Nut

* Consult factory for elevations over 2,000 feet.
** Orifices are not included and must be ordered separately.

450409 -6 www.amdry.com 23

Sail Switch Assembly

Illus. No. Part No. Qty . Description

1 105500 1 Sail Switch Actuator Rod
2 319202 1 Sail Switch Damper (flat)
3 154002 1 1/8” Push-On Fastener
4 802800 1 Sail Switch Box with Cover and Bracket ONLY

802801 1 Sail Switch Box Assembly Complete

(includes illus. nos. 1 through 4 and 6 through 10)
5 150300 2 #10-16 x 1/2” Hex Washer
6 150303 2 #4 x 3/4” Pan Head “A” Machine Screw
7 122200 1 Sail Switch ONLY
8 802799 1 Sail Switch Box Cover and Bracket ONLY
9 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
10 154004 1 Twin Speed Nut

24 American Dryer Corporation 450409 -6

Steam Damper Assembly

Illus. No. Part No. Qty . Description

1 165017 1 Steam Coil ONLY
2 153002 6 5/16” Lock Washer
3 152004 6 5/16-18 Hex Nut
4 152002 4 1/4-20 Hex Nut
5 153007 4 1/4” Lock Washer
6 820321 2 Steam Damper Hinge Assembly
7 820994 1 Steam Damper Assembly

(includes illus. nos. 7, 10, and 11)
8 153007 4 1/4” Lock Washer
9 152002 4 1/4-20 Hex Nut
10 115995 96 Steam Damper Gasket (sold by the inch)
11 102350 2 Steam Damper Foam (68-1/2” length)
12 151007 1 7/16-20 Stainless Steel Acorn Nut
13 100499 1 1-1/2” Bore x 3” Stroke Piston
14 100500 1 Piston Support Bracket
15 152002 4 1/4-20 Hex Nut
16 153007 4 1/4” Lock Washer
17 100472 1 1/4” x 1/8” Connector
18 143110 1 1/4” Tubing (sold by the foot)

450409 -6 www.amdry.com 25

Top Console Assembly

Illus. No. Part No. Qty . Description

1 882447 1 Top Console Assembly ONLY (white) for Gas Models ONLY

882448 1 Top Console Assembly ONLY (coral wrinkle blue) for Gas Models ONLY
882445 1 Top Console Assembly ONLY (white) for Steam Models ONLY

882446 1 Top Console Assembly ONLY (coral wrinkle blue) for Steam Models ONLY
2 112284 1 “Phase 6 OPL Program Location Summary” Label
3 –––––– 1 Dryer Data Label (not for resale by ADC)
4 153007 8 1/4” Lock Washer
5 152005 8 1/4-20 Hex Nut
6 82 1105 1 Pneumatic Valve Assembly ONLY for Gas Models ONLY

(refer to Pneumatic Valve Assembly on page 27)

821104 1 Pneumatic Valve Assembly ONLY for Steam Models ONLY

(refer to Pneumatic Valve Assembly on page 28)
7 121104 1 2” x 4” Junction Box ONLY
8 121105 1 Junction Box Cover ONLY
9 150615 4 1/4-20 x 3/4” Bolt
10 153018 4 1/4” Flat Washer
11 332186 1 Control Door Hinge Channel

26 American Dryer Corporation 450409 -6

Pneumatic Valve Assembly

For Gas Models ONL Y

Illus. No. Part No. Qty . Description

1 143250 1 1/8” M.P.T. Brass Plug
2 150002 1 #6-32 x 1” Slotted Machine Screw
3 100498 1 3-Way Micro Valve ONL Y – 24 V AC

821105 1 Pneumatic Valve Assembly Complete

(includes illus. nos. 1 through 8)
4 143149 1 1/4” Poly x 1/8” M.P.T . Elbow
5 100472 1 1/4” x 1/8” Connector
6 330987 1 Micro Valve Support Bracket ONLY
7 153010 1 #6 Star Washer
8 152000 1 #6-32 Hex Nut

450409 -6 www.amdry.com 27

Pneumatic Valve Assembly

For Steam Models ONL Y

Illus. No. Part No. Qty . Description

1 100496 1 1/8” Needle Valve
2 143238 3 1/8” Close Nipple
3 100498 2 3-Way Micro Valve ONL Y – 24 V AC

821104 1 Pneumatic Valve Assembly Complete

(includes illus. nos. 1 through 10)
4 143223 1 1/8” F.P.T. Brass Tee
5 150002 2 #6-32 x 1” Slotted Machine Screw
6 330987 1 Micro Valve Support Bracket ONLY
7 153010 2 #6 Star Washer
8 152000 2 #6-32 Hex Nut
9 100520 2 1/8” N.P.T. Silencer (muffler)
10 100472 2 1/4” x 1/8” Connector

28 American Dryer Corporation 450409 -6

Air Jet Assembly

Illus. No. Part No. Qty . Description

1 332700 1 Air Jet Tube ONLY
2 143287 1 1/4” x 1/8” M.P.T . Male Run Tee
3 143259 2 1/4” x 1/8” F .P.T. Bulkhead Fitting
4 143100 36 1/4” Aluminum Tube (sold by the inch)
5 821081 1 Air Jet Mounting Plate ONLY

(includes illus. nos. 1 through 9)

332531 1 Air Jet Mounting Plate ONLY
6 152002 2 1/4-20 Hex Nut
7 153007 2 1/4” Lock Washer
8 143110 5 1/4” Poly-Flo Tubing (sold by the foot)
9 143149 1 1/4” x 1/8” M.P.T . x 90° Elbow

450409 -6 www.amdry.com 29

Microprocessor Reversing Contactor Mounting Panel Assembly

30 American Dryer Corporation 450409 -6

Microprocessor Reversing Contactor Mounting Panel Assembly

Illus. No. Part No. Qty . Description

1 132439 1 17-25-Amp Blower (Impellor / Fan) Overload
2 132465 1 Reversing (Impellor / Blower / Fan) Contactor – 24 VAC
3 151001 2 #8-32 Pal Nut
4 150008 2 #6-32 x 1-1/4” Slotted Round Head Machine Screw
5 120701 1 4-Position Power Distribution Block
6 132434 1 D-Line Reversing Contactor

(for models mfd. as of April 20, 1999)

132448 1 K-Line Reversing Contactor – 24 VAC

(for models mfd. prior to April 20, 1999)
7 835148 1 Transformer (208-240 Volt 3ø)
8 137060 1 Arc Suppressor Board (3)
9 137013 4 Nylon Standoff
10 152004 2 5/16-18 Hex Nut
11 121012 1 Terminal / Ground Lug
12 153002 1 5/16” Lock Washer
13 136008 2 Fuse Block / Holder
14 136057 2 1/2-Amp (Slo-Blo) Fuse
15 332346 1 Contactor / Relay Mounting Panel ONLY
16 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
17 151000 2 #6-32 Pal Nut
18 120765 2 End Stop / Bracket
19 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
20 150297 1 #10 x 1/2” Hex Washer TEK Screw
21 121010 1 L-70 Ground Lug
22 120768 8 Din Mounting Rail (sold by the inch)
23 132467 1 9-13-Amp Drive Motor Overload 208-240 Volt

450409 -6 www.amdry.com 31

Back Guard Assemblies

32 American Dryer Corporation 450409 -6

Illus. No. Part No. Qty . Description

1 821956 1 20” Round Duct Transition Piece Assembly

821793 1 20” Round Duct Transition Piece with Damper Assembly
2 –––––– 1 Wiring Diagram For Machine
3 112046 1 “Computer Ground” Label
4 114005 1 “Danger – Hot” Label
5 112519 1 “Routine Maintenance” Label
6 112295 1 “High Voltage” Label
7 114007 1 “Danger – High Voltage” Label
8 112014 1 “High Voltage” Label
9 114008 1 “Warning – Fumes” Label
10 114001 1 “Caution – Exhaust / Lint Screen” Label
11 150512 4 1/4-20 x 1/2” Hex Head Machine Bolt
12 332309 1 Side Access Panel
13 112280 1 “Clean Lint Screen” Label
14 112017 1 “ADC Name, Address, Telephone Number” Label
15 –––––– 1 Serial Number Label (not for resale)
16 –––––– 1 Wiring Diagram
17 112284 1 “Phase 6 Program Location” Label
18 114093 1 “Important Manual Reset Hi-Limit” Label
19 170511 2 1/8” M.P.T. Zirc (grease) Fitting
20 143164 2 1/8” F.P.T. Bulkhead Fitting
21 100472 2 1/4” Tube x 1/8” M.P.T. Male Connector
22 143115 4 1/4” Nylo-Seal Tube
23 100472 2 1/4” Tube x 1/8” M.P.T. Male Connector
24 143246 2 1/4-28 x 18” F .P.T. Fitting
25 114095 1 “Do Not Dry Mop Heads” Label
26 114006 1 “WARNING – Fire Hazard” Label
27 114077 1 “Grease Instruction” Label
28 114093 1 “Important Manual Reset Hi-Limit” Label
29 153007 4 1/4-20 Lock Washer

Back Guard Assemblies

450409 -6 www.amdry.com 33

ADC Part No. 450409 6 - 08/13/08 - 0