American Dryer Corp EURO-14 User Manual

Euro-14 Parts Manual

24 VAC Phase 5 Coin

Phase 6 OPL

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

T elephone: [phone] / Fax: [phone]

E-mail: [e-mail]

www .amdry .com

ADC Part No. 450578

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is

properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.

W e have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME _______________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

Euro-14

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory ,
you can F AX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORT ANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.

Table of Contents

Control Door Assembly .......................................................................................................................... 3

Phase 6 Non-Coin Microprocessor Control Panel Assembly ................................................................... 4

Phase 6 Non-CoinMicroprocessor Control Box Assembly ...................................................................... 5

Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 6

Dual T imer Control Panel Assembly ........................................................................................................ 7

Coin and Dual Timer Control Box Assembly............................................................................................ 8

Coin V ault Assembly ............................................................................................................................... 9

Front Panel Assembly ........................................................................................................................... 10

Main Door “Steel” Assembly ................................................................................................................ 11

Main Door Switch Assembly ................................................................................................................. 12

Tumbler/Support Assemblies ................................................................................................................. 13

Lint Drawer/Lint Drawer Switch Assemblies

For Models Mfd. as of September 8, 2000 ..................................................................................... 14

Lint Drawer/Lint Drawer Switch Assemblies

For Models Mfd. prior to September 8, 2000 ................................................................................. 15

Idler Bearing Assembly ................................................................................................................... 16, 17

Tumbler Bearing Assembly

For Models Mfd. as of July 17, 2000........................................................................................ 18, 19

Tumbler Bearing Assembly

For Models Mfd. prior to July 17, 2000 .................................................................................... 20, 21

Non-Reversing T otally Enclosed, Fan Cooled Motor Mount Assembly ............................................ 22, 23

Reversing T otally Enclosed, Fan Cooled Motor Mount Assembly .................................................... 24, 25

Sensor Bracket Assemblies............................................................................................................. 26, 27

Gas Burner Assembly ..................................................................................................................... 28, 29

Electric Oven Assembly .................................................................................................................. 30, 31

Single-Phase (1ø) Motor, Electric Relay Panel Assembly ....................................................................... 32

3-Phase (3ø) Motor, Electric Relay Panel Assembly .............................................................................. 33

Reversing Electric Relay Panel Assembly......................................................................................... 34, 35

Steam Coil/Air Operated Steam Damper Assembly ......................................................................... 36, 37

Steam Coil/Mechanical Steam Damper Assembly ............................................................................ 38, 39

Outer T op/Back Guard Assemblies ....................................................................................................... 40

Microprocessor Coin Acceptors Listing ................................................................................................ 41

Electrical Oven Component Application Chart....................................................................................... 42

Additional Parts A vailable ..................................................................................................................... 43

Control Door Assembly

Illus. No. Part No. Qty. Description

1 160015 1 High Security MK-100 Lock Assembly with Key

(for coin models Only)

160017 1 Special Dummy Lock Only

(for non-coin models Only)

160104 1 MK-100 Key Only
2 160052 1 Lock Cam Only
3 112367 1 Euro Logo with Tape
4 882511 1 White Control Door Assembly Less Lock

(includes illus. nos. 4 and 5)

882513 1 Almond B Control Door Assembly Less Lock

(includes illus. nos. 4 and 5)

882512 1 Coral Blue Control Door Assembly Less Lock

(includes illus. nos. 4 and 5)
5 117603 3 Noise Suppressor Tape (sold by the foot)
6 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
7 102603 1 Control Door Rod Support Catch
8 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
9 102502 1 Control Door Support Rod
10 102601 1 Control Door Rod Retainer Clip

450578-2 Telephone: [phone] / www.amdry.com 3

Phase 6 Non-Coin Microprocessor Control Panel Assembly

Illus. No. Part No. Qty. Description

1 112537 1 Phase 6 Non-Coin Keyboard

112276 1 Non-Coin Stick-On Labels

(English Only)...Not Illustrated

112275 1 3-Language Non-Coin Stick-On Labels

(Spanish, Italian, and Hebrew)...Not Illustrated

112277 1 3-Language Non-Coin Stick-On Labels

(English, Spanish, and Hebrew)...Not Illustrated

112278 1 5-Language Non-Coin Stick-On Labels

(Italian, Dutch, French, German, and Chinese)...Not Illustrated

2 881745 1 Phase 6 Microprocessor Controller (computer) Panel Only

881747 1 Phase 6 Non-Coin Non-Reversing Computer Panel Assembly Complete

(includes illus. nos. 1 through 5 and 7 through 9)

881746 1 Phase 6 Non-Coin Reversing Computer Panel Assembly Complete

(includes illus. nos. 1 through 5 and 7 through 9)

3 137123 1 Phase 6 Non-Coin Non-Reversing Microprocessor Controller (computer)

Only

137122 1 Phase 6 Non-Coin Reversing Microprocessor Controller (computer) Only
4 150005 3 #6-32 x 3/4” Phillips Round Head Machine Screw
5 153010 3 #6 Star Washer
6 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
7 136048 1 1/8-Amp (Slo-Blo) Fuse
8 136017 1 3.15-Amp (fast acting) Fuse
9 136019 1 1-Amp (fast acting) Fuse

4 American Dryer Corporation 450578-2

Phase 6 Non-Coin Microprocessor Control Box Assembly

Illus. No. Part No. Qty. Description

1 122648 1 4-Pin Connector
2 122646 1 2-Pin Connector
3 122640 1 9-Pin Connector
4 122644 1 6-Pin Terminal
5 122706 * Socket Terminal ONLY

-- 122801 1 Pin/Socket Extraction Tool

* As needed.

450578-2 Telephone: [phone] / www.amdry.com 5

Phase 5 Coin Microprocessor Control Panel Assembly

Illus. No. Part No. Qty. Description

1 112526 1 Coin Keyboard Label Assembly
2 801213 1 Phase 5 Coin Control Panel Assembly

(includes illus. nos. 1, 2, 4, 5, and 6)

801229 1 Phase 5 Coin Control Panel Assembly with Battery Option

(includes illus. nos. 1, 2, 4, 5, and 6)
801259 1 Coin Control Panel Only
801258 1 Coin Control Panel Only with Battery Bracket

3 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 137213 1 Phase 5 Coin Controller Only

824998 1 Phase 5 Battery Clip

5 153010 2 #6 Star Washer
6 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
7 -------- 1 Microprocessor Coin Acceptor

(refer to Microprocessor Coin Acceptors Listing on page 41)

8 -------- 1 Optic Switch Only

(refer to Microprocessor Coin Acceptors Listing on page 41)

9 137023 1 Optic Switch Connector Only
10 137021 3 Microprocessor Socket Only

880772 1 Single Coin Optical Switch Harness
122800 1 Microprocessor (female) Pin Extraction Tool

11 136048 1 1/8-Amp (Slo-Blo) Fuse

IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).

6 American Dryer Corporation 450578-2

Dual Timer Control Panel Assembly

Illus. No. Part No. Qty. Description

1 123005 1 Red Indicator Light - 24 VAC
2 122400 1 Rocker Heat Selector Switch
3 818051 1 Dual Timer Control Panel Assembly Complete - 24 VAC

(includes illus. nos. 1 through 16)

882600 1 Dual Timer Reversing Control Panel Assembly Complete - 24 VAC

(includes illus. nos. 1 through 17)

850456 1 Dual Timer Control Panel Only
4 131917 1 Push-To-Start Relay - 24 VAC
5 150207 2 #10-24 x 1/2” Phillips Pan Head Machine Screw
6 154001 2 #10-24 Speed Nut
7 152000 2 #6-32 Hex Nut
8 153010 2 #6 Star Washer
9 120730 1 30-Position Terminal Block
10 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw
11 131932 1 Dual Timer Relay - 24 VAC
12 151000 4 #6-32 Pal Nut
13 112050 1 Dual Timer Label Only
14 124103 2 Arrow Timer Knob
15 124025 1 60-Minute Timer - 24 VAC
16 124030 1 15-Minute Timer - 24 VAC
17 132198 1 Reversing Timer - 24 VAC

450578-2 Telephone: [phone] / www.amdry.com 7

Coin and Dual Timer Control Box Assembly

Illus. No. Part No. Qty. Description

1 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
2 131931 1 Heat Relay - 24 VAC

(for dual timer models Only)
3 122641 1 15-Pin Microprocessor Controller (computer) Connector
4 122706 * Socket Terminal Only

-- 122801 1 Pin/Socket Extraction Tool
5 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
6 132198 1 Reversing Timer 24v

(for coin models Only)

* As required.

8 American Dryer Corporation 450578-2

Coin Vault Assembly

Illus. No. Part No. Qty. Description

1 802112 1 Microprocessor Coin Vault Assembly Complete

(includes illus. nos. 1 through 5)
802117 1 Microprocessor Coin Vault Only
802110 1 Non-Microprocessor Coin Vault Assembly Complete

(includes illus. nos. 1 through 5)
802115 1 Non-Microprocessor Coin Vault Only

2 160028 1 Cam for 1/4 Turn Lock Only
3 875061 1 1/4 Turn Lock with Key and Cam

160105* 1 1/4 Turn Mer-Pel Key Only

4 802020 1 1/4 Turn Coin Box Assembly

(includes illus. nos. 2 through 4)

5 152014 4 1/4-20 Free Spin Wash Nut
6 102502 1 Control Door Support Rod
7 102601 1 Control Door Rod Retainer Clip
8 102603 1 Control Door Rod Catch

* Specify key number when ordering.

450578-2 Telephone: [phone] / www.amdry.com 9

Front Panel Assembly

Illus. No. Part No. Qty. Description

1 883137 1 White Front Panel Assembly

(includes illus. nos. 1, 5, and 6)
(for models mfd. as of January 18, 2000)

883138 1 Coral Blue Front Panel Assembly

(includes illus. nos. 1, 5, and 6)
(for models mfd. as of January 18, 2000)

883139 1 Ivory Front Panel Assembly

(includes illus. nos. 1, 5, and 6)
(for models mfd. as of January 18, 2000)

817052* 1 Front Panel

(includes illus. nos. 1, 5, and 6)
(for models mfd. prior to January 18, 2000)

2 150313 11 #10-16 x 1/2” TORX Plus BTN Type 1

150318 1 25 IP TORX Plus Bit 1/4 Hex (for removal of TORX head screw)

3 -------- 1 Main Door Hinge

(refer to Main Door “Steel” Assembly on page 11)

4 -------- 1 Lint Drawer Switch

(refer to Lint Drawer/Lint Drawer Switch Assemblies on page 14)

5 881987 1 Friction Door Latch

(includes illus. nos 5 and 6)

6 154215 2 5/32” Pop Rivet

* Specify color when ordering.

10 American Dryer Corporation 450578-2

Main Door “Steel” Assembly

Illus. No. Part No. Qty. Description

1 881150 1 Black Main Door Assembly Complete

(includes illus. nos. 1, 2, and 8 through 15)

2 102354 1 Door Gasket

170730 1 Clear Glass Adhesive (10.3 oz. cartridge)
170731 1 Black Glass Adhesive (10.3 oz. cartridge)

3 881152 1 Black Top Hinge Block Assembly

(includes illus. nos. 3 and 4)

4 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
5 153031 1 1/4” Nylon Washer
6 881151 1 Black Bottom Hinge Block Assembly

(includes illus. nos. 5, 6, and 7)

7 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
8 150683 3 1/4-20 x 5/8” Black Carriage Bolt
9 152014 3 1/2-20 Free Spin Wash Nut
10 151010 1 #10-32 Black Hex Acorn Nut
11 150120 1 Door Latch Screw
12 150683 3 1/4-20 x 5/8” Black Carriage Bolt
13 152014 3 1/2-20 Free Spin Wash Nut
14 881210 1 Black Main Door Handle Only
15 102211 1 20-7/16” Door Glass

102218 1 20-7/16” Door Glass with 4 Holes

(for models mfd. between February 2, 2001 and September 6, 2001)
170730 1 Clear Glass Adhesive (10.3 oz. cartridge)
170731 1 Black Glass Adhesive (10.3 oz. cartridge)

450578-2 Telephone: [phone] / www.amdry.com 11

Main Door Switch Assembly

Illus. No. Part No. Qty. Description

1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Door Switch
5 122636 2 Flag Terminal
6 881211 1 Black Main Door Switch Housing Only

881153 1 Black Main Door Switch Housing Complete

(includes illus. nos. 1, 2, 3, 4, and 6)

7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

12 American Dryer Corporation 450578-2