American Dryer Corp WDA-530DSi II, ADG-530DSi II User Manual

ADG-530DSi II/WDA-530DSi II
Direct Spark Ignition
Parts Manual
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
121099WM/tcosta ADC Part No. 450427
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.
The following “FOR YOUR SAFETY ” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Quick Reference Diagram
For Detailed Information See the Table of Contents on Next Page.
Table of Contents
Front Panel Assembly ............................................................................................................................. 3
Left Coin Panel Assembly ....................................................................................................................... 4
Right Coin Panel Assembly ..................................................................................................................... 5
2-Piece Microprocessor (Computer) Panel/Coin Chute Assemblies ......................................................... 6
Coin Box/Coin Vault Assemblies (Left and Right) .................................................................................... 7
Main Door “Steel’’ Assembly .............................................................................................................. 8, 9
Main Door Switch Assembly................................................................................................................. 10
Basket (Tumbler)/Support Assemblies ....................................................................................................11
Lint Drawer/Basket Assembly ............................................................................................................... 12
Lint Drawer Switch Box Assembly ........................................................................................................ 13
Microprocessor Temperature Sensor Bracket Assembly ........................................................................ 14
Basket (Tumbler) Bearing Mount Assembly ........................................................................................... 15
Rear Electrical Panel Assembly ....................................................................................................... 16, 17
Drive Motor/Motor Mount Assemblies
For 60 Hz Models ............................................................................................................................ 18
Drive/Idler Belts and Pulleys
For 60 Hz Models ............................................................................................................................ 19
Impellor (Fan)/Idler Bearing Assemblies
For 60 Hz Models ...................................................................................................................... 20, 21
Burner Train Assembly without Shut Off Valve
For Models Mfd. as of February 29, 2000.................................................................................. 22, 23
Burner Train Assembly
For Models Mfd. prior to February 29, 2000.............................................................................. 24, 25
Burner Hi-Limit/Hood Assemblies ......................................................................................................... 26
Sail Switch Assembly ............................................................................................................................ 27
Rear Back Guard Assemblies................................................................................................................ 28
Exhaust Duct Assembly......................................................................................................................... 29
Additional Parts Available ..................................................................................................................... 30
Telephone: (508) 678-9000
Fax: (508) 678-9447
Front Panel Assembly
3
Illus. No. Part No. Qty. Description
1 881471* 1 Right Hand Textured Front Panel Assembly
2 --------- 1 Top Hinge Block Assembly
3 --------- 1 Bottom Hinge Block Assembly
4 112227 1 Top Arrow Label (Red) 5 150309 24 #10-16 x 1/2” Hex Head TEK Crimptite Screw 6 112226 1 Bottom Arrow Label (Blue) 7 154215 4 5/32” Pop Rivet 8 170330 2 Friction Door Catch
* Specify color when ordering.
(includes illus. nos. 1, 7, and 8)
881472 1 Right Hand Stainless Steel Front Panel Assembly
(includes illus. nos. 1, 7, and 8)
881473* 1 Right Hand Front Panel Assembly
(includes illus. nos. 1, 7, and 8)
(refer to Main Door “Steel” Assembly on page 8 and page 9)
(refer to Main Door “Steel” Assembly on page 8 and page 9)
4
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Left Coin Panel Assembly
Illus. No. Part No. Qty. Description
1 881163 1 25¢ U.S. Hanke Coin Acceptor Assembly with Optic Switch
881450 1 25¢ Canadian Hanke Coin Acceptor with Optic Switch
881451 1 .880 Token Hanke Coin Acceptor with Optic Switch 2 881143 1 Hanke Optic Switch with Connector 3 112564 1 Left Keypad (Blue) 4 881160 1 Coin Panel ONLY
881161 1 Left Coin Panel with Label
(includes illus. nos. 3, 4, 8, and 9)
5 160029 1 Lock (keyed NO530) ONLY with Key
160129 1 NO530 Key ONLY 6 160028 1 Lock Cam ONLY 7 137098 1 Display Board
137104 1 Display Board Ribbon Cable Assembly...Not Illustrated 8 153010 2 #6 Star Washer 9 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
10 120906 1 1/8” Wire Clip 11 152102 4 M3 Metric Hex Nut
Telephone: (508) 678-9000
Fax: (508) 678-9447
Right Coin Panel Assembly
5
Illus. No. Part No. Qty. Description
1 881163 1 25¢ U.S. Hanke Coin Acceptor Assembly with Optic Switch
2 881143 1 Hanke Optic Switch with Connector 3 112565 1 Right Keypad (Red) 4 881160 1 Coin Panel ONLY
5 160029 1 Lock (keyed NO530) ONLY with Key
6 160028 1 Lock Cam ONLY 7 137098 1 Display Board
8 153010 2 #6 Star Washer 9 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
10 120906 1 1/8” Wire Clip
11 152102 4 M3 Metric Hex Nut
881450 1 25¢ Canadian Hanke Coin Acceptor with Optic Switch 881451 1 .880 Token Hanke Coin Acceptor with Optic Switch
881162 1 Right Coin Panel with Label
(includes illus. nos. 3, 4, 8, and 9)
160129 1 NO530 Key ONLY
137104 1 Display Board Ribbon Cable Assembly...Not Illustrated
6
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
2-Piece Microprocessor (Computer) Panel/Coin Chute Assemblies
Illus. No. Part No. Qty. Description
1 137103 1 Phase 5 Microprocessor Controller (Computer) 2 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw 3 137104 1 Ribbon Cable Assembly 4 136048 1 1/8-Amp (Slo Blo) Fuse ONLY 5 853071 1 or 2 Optic Switch Harness 6 853171 1 Microprocessor Controller (Computer) Panel
853170 1 Microprocessor Controller (Computer) Panel Mounting Plate
...Not Illustrated
7 881484 1 2-Piece Coin Chute Assembly
Telephone: (508) 678-9000
Fax: (508) 678-9447
Coin Box/Coin Vault Assemblies (Left and Right)
7
Illus. No. Part No. Qty. Description
1 881174 1 Black Left/Right Coin Box Faceplate Only
2 881474 1 Coin Box Lock kit (includes 2 Locks with Keys “Keyed Alike”)
3* 160136 1 Coin Box Lock Key ONLY
4 881477 1 Black Left Coin Vault ONLY 5 881174 1 Black Left/Right Coin Box Faceplate ONLY
6 881179 1 Black Right Coin Vault ONLY
* Specify key number when ordering.
881476 1 Left Coin Box with Black Faceplate Only (Less Lock)
881167 1 Right Coin Box with Black Faceplate ONLY (Less Lock)
8
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Main Door “Steel’’ Assembly
Telephone: (508) 678-9000
Fax: (508) 678-9447
Main Door “Steel’’ Assembly
Illus. No. Part No. Qty. Description
1 881150 1 Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
881207 1 Stainless Steel Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
2 102354 1 Door Gasket
170730 1 Clear Gasket Adhesive (10.7 oz. cartridge) 170731 1 Black Gasket Adhesive (10.7 oz. cartridge)
3 881152 1 Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
881208 1 Stainless Steel Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
4 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
150443 2 1/4-20 x 3/4” Stainless Steel Cap Head Setscrew 5 153031 1 1/4” Nylon Washer 6 881151 1 Black Bottom Hinge Block Assembly
(includes illus. nos. 5, 6, and 7)
881209 1 Stainless Steel Bottom Hinge Block Assembly
(includes illus. nos. 5, 6, and 7)
7 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
150443 2 1/4-20 x 3/4” Stainless Steel Cap Head Setscrew 8 150683 3 1/4-20 x 5/8” Black Carriage Bolt
150682 3 1/4-20 x 5/8” Polished Carriage Bolt
(for models with Stainless Steel Door)
9 152014 3 1/2-20 Free Spin Wash Nut
10 151010 1 #10-32 Black Hex Acorn Nut
151009 1 #10-32 Stainless Steel Hex Acorn Nut
11 150120 1 Door Latch Screw 12 150683 3 1/4-20 x 5/8” Black Carriage Bolt
150682 3 1/4-20 x 5/8” Polished Carriage Bolt
(for models with Stainless Steel Door) 13 152014 3 1/2-20 Free Spin Wash Nut 14 881210 1 Black Main Door Handle ONLY
170333 1 Stainless Steel Main Door Handle ONLY
15 102211 1 20-7/16” Door Glass
170730 1 Clear Glass Adhesive (10.3 oz. cartridge) 170731 1 Black Glass Adhesive (10.3 oz. cartridge)
9
10
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly
Illus. No. Part No. Qty. Description
1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw 2 152013 2 #6-32 Hex Nut 3 153010 2 #6 Star Washer 4 137005 1 Door Switch 5 122636 2 Flag Terminal 6 881211 1 Black Main Door Switch Housing ONLY
881212 1 Beige Main Door Switch Housing ONLY 881213 1 White Main Door Switch Housing ONLY 881214 1 Blue Main Door Switch Housing ONLY
881153 1 Black Main Door Switch Housing Complete
(includes illus. nos. 1, 2, 3, 4, and 6)
881215 1 Beige Main Door Switch Housing Complete
(includes illus. nos. 1, 2, 3, 4, and 6)
881216 1 White Main Door Switch Housing Complete
(includes illus. nos. 1, 2, 3, 4, and 6)
881217 1 Blue Main Door Switch Housing Complete
(includes illus. nos. 1, 2, 3, 4, and 6)
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
Telephone: (508) 678-9000
Fax: (508) 678-9447
Basket (Tumbler)/Support Assemblies
11
Illus. No. Part No. Qty. Description
1 800831 1 Basket (Tumbler)/Galvanized/Support Assembly Complete with Felt Collar
(includes illus. nos. 1 through 11)
800721* 1 Basket (Tumbler) (Galvanized) ONLY
800891 1 Stainless Steel Basket (Tumbler)/Support Assembly Complete with
Felt Collar
(includes illus. nos. 1 through 11)
800841* 1 Stainless Steel Basket (Tumbler) ONLY
2 301315 2 Short (Galvanized) Basket (Tumbler) Rib ONLY
301316 1 Tall (Galvanized) Basket (Tumbler) Rib ONLY 301414 2 Short (Stainless Steel) Basket (Tumbler) Rib ONLY
301415 1 Tall (Stainless Steel) Basket (Tumbler) Rib ONLY 3 150518 1 5/16-18 x 3/8” Socket Button Head Screw 4 100902 3 5/16-18 x 31” Tie Rod 5 153001 3 5/16” Flat Washer 6 154210 30 5/32” x 3/16” Pop Rivet 7 800617 1 Basket (Tumbler) Support ONLY 8 152004 3 5/16-18 Hex Nut 9 153002 3 5/16” Lock Washer
10 153001 3 5/16” Flat Washer
11 116003 1 Felt Collar ONLY
401010 1 #847 Adhesive for Felt Collar (5 oz. Tube)
* Felt collar is not included and must be ordered separately.
12
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Lint Drawer/Basket Assembly
Illus. No. Part No. Qty. Description
1 881467* 1 Textured Lint Drawer Assembly
(Less Lock and Logo)
881466 1 Stainless Steel Lint Drawer Assembly
(Less Lock and Logo)
881468* 1 Lint Drawer Assembly
(Less Lock and Logo)
112346 1 Wasco Dry Logo...Not Illustrated 2 160015 1 MK-100 Lock with Key (Less Cam) 3 160031 1 Cam Only (90° Bend) 4 160104 1 Mk-100 Key ONLY 5 117604 4 Neoprene Sponge Gasket (sold by the foot) 6 --------- 1 Lint Drawer Switch
(refer to Lint Drawer Switch Box Assembly on page 13)
* Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
Lint Drawer Switch Box Assembly
13
Illus. No. Part No. Qty. Description
1 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 2 826303 1 Lint Drawer Switch Panel 3 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw 4 353261 1 Lint Drawer Switch Box
5 122116 1 Lint Drawer Switch 6 122636 2 .250 Insulated Flag Terminal 7 122701 4 Socket Terminal ONLY
8 122605 2 4-Pin Socket Connector 9 881502 1 Lint Drawer Switch Harness
881494 1 Lint Drawer Switch Box Assembly
(includes illus. nos. 1, 2, and 4 through 9)
112801 Pins/Socket Extraction Tool
14
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Microprocessor Temperature Sensor Bracket Assembly
Illus. No. Part No. Qty. Description
1 853021 1 Sensor Bracket ONLY
881090 1 Microprocessor Temperature Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 6 and 9 through 12)
2 880251 1 Microprocessor Temperature Sensor Probe Assembly Complete
(includes illus. nos. 2 through 6) 3 154007 2 1/4” Push-On Fastener 4 121028 2 1/4” Terminal 5 122701 4 Socket Terminal ONLY
112801 Pins/Socket Extraction Tool 6 122605 1 4-Position Connector (Female) 7 122700 4 Pin Terminal ONLY 8 122604 1 4-Position Connector (Male) 9 130112 1 225° Thermostat
10 150005 2 6/32 x 1/4” Phillips Round Head Machine Screw 11 153010 2 #6 Star Washer 12 152013 2 #6-32 Hex Nut 13 152014 2 1/4-20 Free Spin Wash Nut
Telephone: (508) 678-9000
Fax: (508) 678-9447
Basket (Tumbler) Bearing Mount Assembly
15
Illus. No. Part No. Qty. Description
1 880203 1 1-3/8” Flange Bearing with Nylock Setscrew
880938 1 Cone Point Setscrew Kit...Not Illustrated 2 153005 4 3/8” Lock Washer 3 152005 4 3/8-16 Hex Nut 4 153004 2 3/8” Flat Washer 5 153005 2 3/8” Lock Washer 6 152005 2 3/8-16 Hex Nut 7 880881 1 1-3/8” Pillow Block Bearing with Rotation Sensor Magnet
880938 1 Cone Point Setscrew Kit...Not Illustrated 8 824807 1 Rotational Sensor Magnetic Switch Assembly 9 853040 1 Basket (Tumbler) Bearing Support ONL Y
10 152004 2 5/16-18 Hex Nut
11 150621 2 5/16-18 x 1-1/2” Hex Head Machine Bolt 12 150600 2 3/8-16 x 1-1/2” Hex Head Machine Bolt 13 150501 2 5/16-18 x 3/4” Hex Head Machine Bolt 14 153002 2 5/16” Lock Washer 15 153001 2 5/16” Flat Washer 16 150610 2 5/16-18 x 1-1/2” Allen Setscrew 17 152004 2 5/16-18 Hex Nut 18 153001 2 5/16” Flat Washer 19 153002 2 5/16” Lock Washer 20 150501 2 5/16-18 x 3/4” Hex Head Machine Bolt
16
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Rear Electrical Panel Assembly
Telephone: (508) 678-9000
Fax: (508) 678-9447
Rear Electrical Panel Assembly
Illus. No. Part No. Qty. Description
1 881495 1 Transformer Kit - 24 VAC 2 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 3 152014 2 1/4-20 Free Spin Wash Nut 4 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 5 136008 1 or 2 Fuse Block ONLY 6 136057 1 or 2 1/2-Amp (Slo-Blo) Fuse ONLY 7 150301 1 or 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 8 132451 1 Motor Contactor - 24 VAC
9 112025 1 “CAUTION - Disconnect Supply” Label 10 353258 1 Connector Bracket 11 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 12 122642 1 9-Pin Connector 13 122643 8 Mate-N-Lock Pin 14 122645 1 6-Pin Connector 15 122643 6 Mate-N-Lock Pin 16 122649 1 4-Pin Connector 17 122643 4 Mate-N-Lock Pin 18 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 19 353153 1 Rear Electrical Box Cover 20 112046 1 “Computer Ground” Label 21 112014 1 “High Voltage” Label 22 112039 1 “Black/White/Green Ground” Label (for 120 VAC Models)
112035 1 “Black/Red/Green Ground” Label (for 208-240 VAC Models) 23 150008 2 #6-32 x 1-1/4” Round Head Machine Screw 24 120701 1 4-Position Terminal Block 25 881222 1 Power Distribution Block Mounting Bracket 26 151000 2 #6-32 Pal Nut 27 153528 2 #8-32 x 1/2” Clinch Stud 28 121300 2 Bushing 29 152001 2 #8-32 Hex Nut 30 121010 1 L-70 Ground Lug 31 153007 1 1/4” Lock Washer 32 152002 1 1/4-20 Hex Nut 33 824828 1 R.C. Network
17
18
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Drive Motor/Motor Mount Assemblies
For 60 Hz Models
Illus. No. Part No. Qty. Description
1 100718 1 3/16” x 3/16” x 2-1/4” Key 2 101133 1 2-1/4” x 5/8” Pulley 3 100171 1 4L-440 V-Belt 4 101207 1 3.0 x 5/8” Pulley 5 100156 1 5L-330 V-Belt 6 881096 1 120/230v 1ø 60 Hz Drive Motor Mount Assembly Complete
(includes illus. nos. 1, 2, 4, and 6 through 16)
181022 1 3/4 HP 120/230v 1ø 60 Hz Motor 7 152004 4 5/16-18 Hex Nut 8 153002 4 5/16” Lock Washer 9 153001 4 5/16” Flat Washer
10 853087 1 Motor Mount Slide Assembly ONLY 11 152005 1 3/8-16 Hex Nut 12 150601 1 3/8-16 x 2” Hex Head Tap Bolt 13 853042 1 Motor Mount Base Assembly ONLY 14 152004 4 5/16-18 Hex Nut 15 153002 4 5/16” Lock Washer 16 153001 4 5/16” Flat Washer 17 153001 4 5/16” Flat Washer 18 153002 4 5/16” Lock Washer 19 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
Telephone: (508) 678-9000
Fax: (508) 678-9447
Drive/Idler Belts and Pulleys
For 60 Hz Models
19
Illus. No. Part No. Qty. Description
1 --------- 1 Basket (Tumbler) Support
(refer to Basket [Tumbler]/Support Assemblies on page 11 )
2 101100 1 18” Pulley
- 154301 2 5/16-18 x 1” Allen (Cone Point) Setscrew 3 100713 1 1/4” x 1/4” x 7/8” Key 4 100106 1 5L-690 V-Belt 5 101206 1 2.8 x 5/8” Pulley 6 101129 1 9” x 2-1/2” Compound Pulley 7 --------- 1 Idler Assembly
(refer to Impellor [Fan]/Idler Bearing Assemblies on page 20 and page 21)
8 100171 1 4L-440 V-Belt 9 154301 2 5/16-18 x 1” Allen (Cone Point) Setscrew
10 101133 1 2-1/4” x 5/8” Pulley 11 100156 1 5L-330 V-Belt 12 101207 1 3.0 x 5/8” Pulley 13 --------- 1 Drive Motor Assembly
(refer to Drive Motor/Motor Mount Assemblies on page 18)
14 100718 1 3/16” x 3/16” x 2-1/4” Key
20
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Impellor (Fan)/Idler Bearing Assemblies
For 60 Hz Models
Telephone: (508) 678-9000
Fax: (508) 678-9447
Impellor (Fan)/Idler Bearing Assemblies
For 60 Hz Models
Illus. No. Part No. Qty. Description
1 100701 1 3/16” x 3/16” x 1” Key 2 101206 1 2.8 x 5/8” Pulley 3 152002 4 1/4-20 Hex Nut 4 153007 4 1/4” Lock Washer 5 154324 4 #10-32 x 1/4” Cone Point Setscrew 6 881361 2 5/8” Flange Bearing 7 881225 1 Impellor (Fan) Bearing Mount Only 8 101129 1 9” Pulley 9 154301 2 5/16-18 x 1” Allen (Cone Point) Setscrew
10 100705 1 3/16” x 3/16” x 1-3/8” Key 11 301850 1 Idler Shaft 12 150529 3 1/4-20 x 2-1/4” Carriage Bolt 13 --------- 4 Flange (included with Part No. 100214) 14 880214 2 5/8” Flange Bearing 15 150617 2 3/8-16 x 1” Hex Head Machine Bolt 16 153005 2 3/8” Lock Washer 17 153004 2 3/8” Flat Washer 18 152020 1 5/16-18 Square Nut 19 152004 1 5/16-18 Hex Nut 20 150509 1 5/16-18 x 3” Hex Head Machine Bolt 21 801016 1 Cast Idler Assembly Complete
(includes illus. nos. 10 through 23)
100406 1 Cast Idler Bearing Mount Assembly 22 153007 3 1/4” Lock Washer 23 152002 3 1/4-20 Hex Nut 24 881226 1 Impellor/Fan Mount ONLY
(includes illus. no. 33) 25 153004 4 3/8” Flat Washer 26 153005 4 3/8” Lock Washer 27 150508 4 3/8-16 x 3/4” Hex Head Machine Bolt 28 153050 3 or 4 1/2” x 1-1/16” Flat Washer 29 100604 1 12-1/2” Impellor (Fan) 30 100723 1 1/8 x 1/8 x 1-3/8” Key 31 152006 2 1/2-20 Left Hand Jam Nut 32 353111 1 Fan Shaft 33 117604 3 Neoprene Sponge Tape (sold by the foot) 34 116011 1 3-1/2” x 4” Felt Bearing Seal
21
22
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Burner Train Assembly without Shut Off Valve
For Models Mfd. as of February 29, 2000
Telephone: (508) 678-9000
Fax: (508) 678-9447
Burner Train Assembly without Shut Off Valve
For Models Mfd. as of February 29, 2000
Illus. No. Part No. Qty. Description
1* 882475 1 ADG-530 (DSiII) Natural Gas Burner Assembly Complete Less Orifice
(includes illus. nos. 1 through 13 and 15 through 24)
882477 1 ADG-530 (DSiII) Liquid Propane (L.P.) Gas Burner Assembly Complete
Less Orifice
(includes illus. nos. 1 through 13 and 15 through 24) 2 142502 1 1/2” x 3/4” Street Elbow 3 142812 1 1/2” x 3” Nipple 4 128927 1 1/2” 24 VAC (Natural Gas) Gas Valve
880960 1 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve
140411 1 1/2” Liquid Propane (L.P.) Gas Valve Conversion Kit (Per Basket
[Tumbler])
881119** Liquid Propane (L.P.) Conversion Kit
(includes parts to convert both top and bottom basket [tumbler] to liquid
propane [L.P.] gas) 5 353237 1 Notched Double Sided Pipe Bracket 6 141211 1 1/2” Single Port Manifold 7 150300 2 #10 x 1/2” Hex Head TEK Screw 8 353222 1 Manifold Pipe Bracket 9 318009 1 Burner Tube Bracket
10 151001 2 #8 Pal Nut 11 141131 1 Upshot Burner Tube with Spreader (not sold separately) 12 353273 1 Direct Spark Ignition (DSI) Burner Tube Angle Bracket 13 150300 2 #10 x 1/2” Hex Head TEK Screw
14** 140836 1 #10 Burner Orifice (Natural Gas)
140855 1 #33 Burner Orifice (Liquid Propane [L.P.] Gas) 15 150002 1 #6-32 x 1” Phillips Round Head Machine Screw 16 128917 1 Direct Spark Ignition (DSI) Ignitor with High Voltage (HV) Wire 17 151000 4 #6-32 Pal Nut 18 128918 1 Flame Sensor Probe 19 150315 4 #6 x 3/8” Phillips Head Screw 20 128936 1 Direct Spark Ignition (DSI) Module with Retries (50/60 Hz) 21 121400 3 7/8” Universal Bushings 22 121410 1 1-3/8” Universal Bushings 23 880869 1 Corcom EMI Filter 24 102600 3 Retainer 25 142600 1 1/2” Black Union
23
* Burner orifice is not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet.
24
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Burner Train Assembly
For Models Mfd. prior to February 29, 2000
Telephone: (508) 678-9000
Fax: (508) 678-9447
Burner Train Assembly
For Models Mfd. prior to February 29, 2000
Illus. No. Part No. Qty. Description
1* 882475 1 ADG-530 (DSiII) Natural Gas Burner Assembly Complete Less Orifice
(includes illus. nos. 1 through 13 and 15 through 24)
882477 1 ADG-530 (DSiII) Liquid Propane (L.P.) Gas Burner Assembly Complete
Less Orifice
(includes illus. nos. 1 through 13 and 15 through 24) 2 142502 1 1/2” x 3/4” Street Elbow 3 881372 1 1/2” F.P.T. Straight Shut Off with Tail Piece 4 128927 1 1/2” 24 VAC (Natural Gas) Gas Valve
880960 1 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve
140411 1 1/2” Liquid Propane (L.P.) Gas Valve Conversion Kit (Per Basket
[Tumbler])
881119** Liquid Propane (L.P.) Conversion Kit
(includes parts to convert both top and bottom basket [tumbler] to liquid
propane [L.P.] gas) 5 353237 1 Notched Double Sided Pipe Bracket 6 141211 1 1/2” Single Port Manifold 7 150300 2 #10 x 1/2” Hex Head TEK Screw 8 353222 1 Manifold Pipe Bracket 9 318009 1 Burner Tube Bracket
10 151001 2 #8 Pal Nut 11 141131 1 Upshot Burner Tube with Spreader (not sold separately) 12 353273 1 Direct Spark Ignition (DSI) Burner Tube Angle Bracket 13 150300 2 #10 x 1/2” Hex Head TEK Screw
14** 140836 1 #10 Burner Orifice (Natural Gas)
140855 1 #33 Burner Orifice (Liquid Propane [L.P.] Gas) 15 150002 1 #6-32 x 1” Phillips Round Head Machine Screw 16 128917 1 Direct Spark Ignition (DSI) Ignitor with High Voltage (HV) Wire 17 151000 4 #6-32 Pal Nut 18 128918 1 Flame Sensor Probe 19 150315 4 #6 x 3/8” Phillips Head Screw 20 128936 1 Direct Spark Ignition (DSI) Module with Retries (50/60 Hz) 21 121400 3 7/8” Universal Bushings 22 121410 1 1-3/8” Universal Bushings 23 880869 1 Corcom EMI Filter 24 102600 3 Retainer
25
* Burner orifice is not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet.
26
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Burner Hi-Limit/Hood Assemblies
Illus. No. Part No. Qty. Description
1 882482 1 Burner Hood 2 130201 1 330° Manual Reset Hi-Limit Thermostat 3 150300 2 #10 x 1/2” Hex Washer TEK Screw 4 150300 4 #10 x 1/2” Hex Washer TEK Screw 5 102600 1 High Voltage (HV) Wire Clip
Telephone: (508) 678-9000
Fax: (508) 678-9447
Sail Switch Assembly
27
Illus. No. Part No. Qty. Description
1 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 2 802800 1 Sail Switch Box with Cover and Bracket ONLY
3 154004 1 Twin Speed Nut 4 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 5 802709 1 Sail Switch Box Cover and Bracket ONLY 6 122200 1 Sail Switch ONLY 7 150303 2 #4 x 3/4” Pan Head “A” Machine Screw 8 105500 1 Sail Switch Actuator Rod
9 319202 1 Sail Switch Damper (embossed) 10 154002 1 1/8” Push-On Fastener 11 853105 1 Burner Box ONLY
(includes illus. nos. 4 and 8)
802801 1 Sail Switch Box Assembly Complete
(includes illus. nos. 2 through 10)
28
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Rear Back Guard Assemblies
Illus. No. Part No. Qty. Description
1 353147 2 Upper and Lower Back Guard 2 150301 14 8-18 x 7/16” Phillips Pan Head TEK Screw 3 114001 1 “CAUTION - Exhaust/Lint Screen” Label 4 112086 1 “Dual Pocket Installation Instructions” Label 5 103500 4 Leveling Leg
Telephone: (508) 678-9000
Fax: (508) 678-9447
Exhaust Duct Assembly
29
Illus. No. Part No. Qty. Description
1 143536 1 6” x 45° Elbow
2 143536 2 6” x 45° Elbow
- 117505 6 Aluminum Duct Tape (sold by the foot)
- 881373 1 6” x 45° Elbow with 6” Damper
30
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Part No. Description
112179 ADG-530HS/WDA-530 Installation/Operator’s Manual 112533 “Phase 5 Coin Program Location Summary” Label 120903 Closed End Connector (Crimp on Wire Nut) 121026 Tab Receptacle Combination 121495 4” Wire Tie 121500 8” Wire Tie 122804 Manometer (Used to Measure Gas Pressure) 404502 White Brush-In-Cap Bottle Touch-Up Paint 404506 Beige Brush-In-Cap Bottle Touch-Up Paint 404507 Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint 410001 1/2” Allen Wrench (Used to Remove Gas Valve Brass Tail Piece) 881299 Loctite Kit (includes 2 [two] 0.02 oz. tubes of #290 Wicking Loctite)
Additional Parts Available
ADC 450427 1 - 03/09/00-25 2 - 09/12/00-25 3* 01/11/02-25
Loading...