American Dryer Corp D30 User Manual

D-30

Parts Manual

JLA Limited

Meadowcroft Lane, Halifax Road

Ripponden

West Yorkshire, England

HX6 4AJ

Telephone: [phone] / Fax: [phone]

031102JCARRITA/rmoles ADC Part No. 450589

Retain This Manual In A Safe Place For Future Reference

J.L.A. products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will

provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.

The following “FOR YOUR SAFETY ” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. J.L.A. reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME _______________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

D-30

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or J.L.A. When ordering replacement parts, you can FAX your order
to J.L.A. at 01422 824390 or telephone your order directly to the J.L.A. Parts Department at 01422 822282. Please specify the
dryer model number and serial number in addition to the description and part number, so that your order is processed
accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.

Table of Contents

OPL Control Door Assembly

For Models Mfd. as of July 1, 2002.................................................................................................. 2

OPL Control Door Assembly

For Models Mfd. prior to July 1, 2002.............................................................................................. 3

Phase 7 OPL Microprocessor Control Panel Assembly ........................................................................... 4

Phase 7 OPL Microprocessor Control Box Assembly ............................................................................. 5

Front Panel Assembly

For Models Mfd. as of July 1, 2002.................................................................................................. 6

Front Panel Assembly

For Models Mfd. prior to July 1, 2002.............................................................................................. 7

Main Door “Steel” Assembly .................................................................................................................. 8

Main Door Switch Assembly................................................................................................................... 9

Basket (Tumbler)/Support Assemblies ................................................................................................... 10

Drop Lint Door Assembly

For Models Mfd. as of July 1, 2002.................................................................................................11

Lint Trap Assembly

For Models Mfd. as of July 1, 2002................................................................................................ 12

Lint Drawer/Lint Drawer Switch Assembly

For Models Mfd. prior to July 1, 2002............................................................................................ 13

Idler Bearing Assembly ......................................................................................................................... 14

Basket (Tumbler) Bearing Assembly ...................................................................................................... 15

Motor Mount Assembly .................................................................................................................. 16, 17

Sensor Bracket Assemblies

For Models Mfd. as of July 1, 2002.......................................................................................... 18, 19

Sensor Bracket Assemblies

For Models Mfd. prior to July 1, 2002...................................................................................... 20, 21

Direct Spark Ignition (DSI) Burner Assembly .................................................................................. 22, 23

Hot Surface Ignition (HSI) Gas Burner Assembly ............................................................................ 24, 25

Electric Oven Assembly .................................................................................................................. 26, 27

Rear Electric Relay Panel Assembly ................................................................................................ 28, 29

S.A.F.E. Temperature Probe Assembly ................................................................................................. 30

S.A.F.E. Solenoid and Piping Assembly ................................................................................................ 31

Steam Coil/Air-Operated Steam Damper Assembly ........................................................................ 32, 33

Outer Top/Back Guard Assemblies ....................................................................................................... 34

Electrical Oven Component Application Chart ....................................................................................... 35

Additional Parts Available ..................................................................................................................... 36

2

OPL Contr ol Door Assembly

For Models Mfd. as of July 1, 2002

Illus. No. Part No. Qty. Description

1 883574 1 White OPL Control Door

(includes illus. nos. 1 and 3)
2 150321 2 #10-32 x 1/2” Phillips Machine Screw
3 117604 4 Neoprene Sponge Tape (sold by the foot)
4 150317 2 #10-16 x 3/4” TORX + BTN Type 1
5 102502 1 Control Door Support Rod
6 154011 2 #10-32 Multi-Thread U-Nut
7 102603 1 Control Door Rod Support Catch
8 102601 1 Control Door Retainer Clip

OPL Contr ol Door Assembly

For Models Mfd. prior to July 1, 2002

3

Illus. No. Part No. Qty. Description

1 883294 1 White Control Door Assembly

(includes illus. nos. 1 and 3)
2 150314 4 #10-32 x 1/2” TORX + BTN
3 117604 2 Noise Suppressor Tape (sold by the foot)
4 --------* 1 Logo
5 154011 4 #10-32 Multi-Thread U-Nut

* Contact reseller for logo.

4

Phase 7 OPL Micr opr ocessor Contr ol Panel Assembly

Illus. No. Part No. Qty. Description

1 112571 1 Phase 7 OPL Keyboard
2 850984 1 Phase 7 Microprocessor Controller (computer) Panel ONLY

883301 1 Phase 7 OPL Reversing Microprocessor Controller (computer) Control

Panel Assembly Complete

(includes illus. nos. 1 through 7)
3 883277 1 Phase 7 OPL Microprocessor Controller (computer) ONLY
4 150005 2 #6-32 x 3/4” Phillips Round Head Machine Screw
5 153010 2 #6 S tar Washer
6 136016 1 5-Amp Fuse
7 136097 1 500 mA Fuse

Phase 7 OPL Micr opr ocessor Control Box Assembly

5

Illus. No. Part No. Qty. Description

1 122681 1 10-Pin Connector
2 122676 1 8-Pin Connector
3 122646 1 2-Pin Connector
4 122683 1 6-Pin T erminal
5 122640 1 9-Pin T erminal
6 122706 * #20-16 U.M.N.L. Socket
7 122669 * Female Crimp T erminal

* As needed.

6

Front Panel Assembly

For Models Mfd. as of July 1, 2002

Illus. No. Part No. Qty. Description

1 883567 1 White Front Panel Assembly

(includes illus. nos. 1, 3, and 5 through 6)

2 150313 1 1 #10-16 x 1/2” TORX + BTN Type 1

150318 1 25 IP TORX + Bit 1/4 Hex (for removal of TORX head screw)

3 -------- 1 Main Door Hinge

(refer to Main Door “Steel” Assembly on page 8)

4 122002 1 Lint Drawer Switch
5 170330 1 Friction Door Latch
6 154215 2 5/32” Pop Rivet

Front Panel Assembly

For Models Mfd. prior to July 1, 2002

7

Illus. No. Part No. Qty. Description

1 883137 1 White Front Panel Assembly

(includes illus. nos. 1, 3, and 5 through 6)

2 150313 11 #10-16 x 1/2” TORX + BTN Type 1

150318 1 25 IP TORX + Bit 1/4 Hex (for removal of TORX head screw)

3 -------- 1 Main Door Hinge

(refer to Main Door “Steel” Assembly on page 8)

4 -------- 1 Lint Drawer Switch

(refer to Lint Drawer/Lint Drawer Switch Assembly on page 13)

5 881987 1 Friction Door Latch Kit

(includes illus. nos. 5 and 6)

6 154215 2 5/32” Pop Rivet

8

Main Door “Steel” Assembly

Illus. No. Part No. Qty. Description

1 8 8 115 0 1 Black Main Door Assembly Complete

(includes illus. nos. 1, 2, and 8 through 15)
2 102354 1 Door Gasket

170731 1 Black Gasket Adhesive (10.3 oz. cartridge)

3 8 8 115 2 1 Black Top Hinge Block Assembly

(includes illus. nos. 3 and 4)
4 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
5 153031 1 1/4” Nylon Washer
6 8 8115 1 1 Black Bottom Hinge Block Assembly

(includes illus. nos. 5 through 7)
7 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
8 150683 3 1/4-20 x 5/8” Black Carriage Bolt
9 152014 3 1/4-20 Free Spin Wash Nut
10 151010 1 #10-32 Black Hex Acorn Nut
1 1 150120 1 Door Latch Screw
12 150683 3 1/4-20 x 5/8” Black Carriage Bolt
13 152014 3 1/4-20 Free Spin Wash Nut
14 881210 1 Black Main Door Handle ONLY
15 102211 1 20-7/16” Door Glass

170731 1 Black Glass Adhesive (10.3 oz. cartridge)

Main Door Switch Assembly

9

Illus. No. Part No. Qty. Description

1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Door Switch
5 122636 2 Flag T erminal
6 881211 1 Black Main Door Switch Housing ONL Y

88 1 1 5 3 1 Black Main Door Switch Housing Complete

(includes illus. nos. 1 through 4 and 6)

7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

10

Basket (T umbler)/Support Assemblies

Illus. No. Part No. Qty. Description

1* 800776 1 Stainless Steel Basket (tumbler) ONLY (without felt collar)

883295 1 Stainless Steel Basket (tumbler)/Support Assemblies Complete

(includes illus. nos. 1 through 10)
2 150313 24 #10-16 x 1/2” TORX + BTN Type 1
3 301420 4 Stainless Steel Basket (tumbler) Rib ONLY
4 150518 1 5/16-18 x 3/8” Socket Button Head Screw
5 100914 4 3/8-16 x 20” T ie Rod
6 153004 4 3/8” Flat Washer
7 817084 1 Basket (tumbler) Support ONLY
8 152005 4 3/8-16 Hex Nut
9 153005 4 3/8” Lock Washer
10 153004 4 3/8” Flat Washer
1 1 116002 1 Felt Collar ONLY

-- 401010 1 #847 Adhesive for Felt Collar (5.0 oz. tube)

* Felt collar is not included and must be ordered separately.

Drop Lint Door Assembly

For Models Mfd. as of July 1, 2002

11

Illus. No. Part No. Qty. Description

1 802277 1 Drop Lint Door (for OPL models)

(includes illus. nos. 1 through 3)
2 117604 5 Sponge Tape (sold by the foot)
3 170226 1 Slide Latch

12

Lint T rap Assembly

For Models Mfd. as of July 1, 2002

Illus. No. Part No. Qty. Description

1 800401 1 Lint Trap Assembly Complete

(includes illus. nos. 1 and 3 through 5)

800443 1 Lint Trap ONLY
2 154200 6 5/32” Pop Rivet
3 150300 3 #10-16 x 1/2” Hex Washer TEK Screw
4 304100 1 Lint Screen Holder ONLY
5 800500 2 Lint Screen Assembly

Lint Drawer/Lint Drawer Switch Assembly

For Models Mfd. prior to July 1, 2002

13

Illus. No. Part No. Qty. Description

1 883140 1 White Lint Drawer Assembly

(includes illus. nos. 1 and 2)
2 117605 5 Gasket (sold by the foot)
3 122116 1 Lint Drawer Switch
4 122605 1 4-Pin Socket Connector ONLY
5 122701 4 Socket T erminal ONLY

122801 1 Pin/Socket Extraction T ool

6 833123 1 Lint Drawer Switch Box Assembly

(includes illus. nos. 3 through 6)

304136 1 Lint Drawer Switch Box Cover ONLY
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
8 122700 4 Pin T erminal ONLY
9 122604 1 4-Pin Connector ONLY

14

Idler Bearing Assembly

Illus. No. Part No. Qty. Description

1 100107 1 5L-670 V-Belt (basket [tumbler] to idler)
2 1 0112 9 1 9” x 2-1/2” Compound Pulley
3 100103 1 4L-510 V-Belt
4 154301 2 5/16-18 x 1” Allen Setscrew
5 100705 1 3/16” x 3/16” x 1-3/8” Key
6 882576 1 Idler Bearing Assembly Complete

(includes illus. nos. 5 through 12)
7 150617 2 3/8-16 x 1” Hex Head Machine Bolt
8 153005 2 3/8” Lock Washer
9 153004 2 3/8” Flat Washer
10 801009 1 Idler Square Washer
1 1 152004 1 5/16-18 Hex Nut
12 150509 1 5/16-18 x 3” Hex Head Machine Bolt

Basket (T umbler) Bearing Assembly

15

Illus. No. Part No. Qty. Description

1 153002 3 5/16” Lock Washer
2 880213 1 1-1/4” Flange Bearing with Nylock Setscrew
3 153002 3 5/16” Lock Washer
4 152004 3 5/16-18 Hex Nut
5 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
6 153002 4 5/16” Lock Washer
7 153004 4 3/8” Flat Washer
8 883609 1 1” Bearing Box Assembly Complete

(includes illus. nos. 8 through 14 and 19 through 21)

801105 1 Bearing Box ONLY
9 150610 2 5/16-18 x 1-1/2” Allen Setscrew
10 152004 2 5/16-18 Hex Nut
11 150501 3 5/16-18 x 3/4” Hex Head Machine Bolt
12 880201 1 1” Flange Bearing with Nylock Setscrews
13 153002 3 5/16” Lock Washer
14 152004 3 5/16-18 Hex Nut
15 101100 1 18” Pulley ONLY
16 154301 2 5/16-18 x 5/16” Setscrew
17 100713 1 1/4” x 1/4” x 7/8” Key
18 100107 1 5L-670 V-Belt (basket [tumbler] to idler)
19 319004 1 Rotational Sensor Bracket
20 883386 1 Rotational Sensor Assembly
21 102120 1 Rotational Sensor Magnet

16

Motor Mount Assembly

Motor Mount Assembly

Illus. No. Part No. Qty. Description

1 100103 1 4L-510 V-Belt (motor to idler)
2 100705 1 3/16” x 3/16” x 1-3/8” Key
3 1 0 113 1 1 1/2” x 2-1/4” Motor Pulley

(for models mfd. as of August 22, 2002)

10 113 3 1 5/8” x 2-1/4” Motor Pulley

(for models mfd. prior to August 22, 2002)
4 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
5 153002 4 5/16” Lock Washer
6 153001 4 5/16” Flat Washer
7 181049 1 1/2 HP 240v 1ø 50 Hz Plug-Type Motor

(for models mfd. as of August 22, 2002)

100066 1 1/2 HP 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Plug-Type

Motor

(for models mfd. prior to August 22, 2002)
8 122701 8 Socket T erminal ONLY

122801 1 Pin/Socket Extraction T ool
9 137030 1 8-Pin Housing Connector
10 152004 4 5/16-18 Hex Nut
11 153002 4 5/16” Lock Washer
12 153001 4 5/16” Flat Washer
13 117604 4 Neoprene Sponge Tape (sold by the foot)
14 154000 4 5/16-18 Tinnerman Nut
15 850017 1 1/2 HP Motor Mount ONLY (56Z frame)

817076 1 1/2 HP 240v 1ø 50 Hz Motor Mount Assembly Complete with Plug Motor

(includes illus. nos. 2 through 7 and 13 through 20)
16 153050 2 1/2” S.A.E. Flat Washer
17 100604 1 12-1/2” Impellor with 1/2” Bore
18 100702 1 1/8” x 1/8” x 1-1/2” Key
19 153050 2 1/2” S.A.E. Flat Washer
20 152006 2 1/2-20 Left Hand Jam Nut

17

18

Sensor Bracket Assemblies

For Models Mfd. as of July 1, 2002

Sensor Bracket Assemblies

For Models Mfd. as of July 1, 2002

Illus. No. Part No. Qty. Description

1 880251 1 1/4” Temperature Sensor Probe Assembly

(includes illus. nos. 1 and 5 through 8)
2 130301 1 225° Large Manual Reset Thermostat
3 153010 2 #6 S tar Washer
4 152000 2 #6-32 Hex Nut
5 121028 2 Insulated T erminal ONL Y
6 122701 4 Socket T erminal ONLY
7 122605 1 4-Pin Socket Connector ONLY
8 154007 2 1/4” Tinnerman Push On Fastener
9 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
10 801424 1 Microprocessor Sensor Bracket Assembly Complete

(includes illus. nos. 1 through 10)

305007 1 Universal Sensor Bracket ONLY
11 122604 1 4-Pin Connector ONLY
12 122700 4 Pin T erminal ONLY
13 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
14 150005 5 #6-32 x 1/4” Phillips Round Head Machine Screw
15 130111 1 130° Large Thermostat
16 130100 1 150° Large Thermostat
17 130103 1 225° Large Manual Reset Thermostat
18 130101 1 180° Large Thermostat
19 153010 5 #6 S tar Washer
20 152000 5 #6-32 Hex Nut
21 840065 1 Sensor Jumper
22 121028 8 Insulated T erminal ONL Y
23 122701 4 Socket T erminal ONLY
24 122605 1 4-Pin Socket Connector ONLY

818007 1 Sensor Bracket Harness Assembly

(includes illus. nos. 21 through 24)

25 818321 1 Noncomputer Sensor Bracket Assembly Complete - Includes Thermostats

(includes illus. nos. 14 through 25)

305007 1 Universal Sensor Bracket ONLY
26 122604 1 4-Pin Connector ONLY
27 122700 4 Pin T erminal ONLY

122801 1 Pin/Socket Extraction T ool
28 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

19

20

Sensor Bracket Assemblies

For Models Mfd. prior to July 1, 2002

Sensor Bracket Assemblies

For Models Mfd. prior to July 1, 2002

Illus. No. Part No. Qty. Description

1 882533 1 1/4” Temperature Sensor Probe Assembly

(includes illus. nos. 1 and 5 through 7)
2 130301 1 225º Manual Reset Thermostat
3 153010 2 #6 S tar Washer
4 152000 2 #6-32 Hex Nut
5 121028 2 Insulated T erminal ONL Y
6 122701 4 Socket T erminal ONLY
7 122605 1 4-Pin Socket Connector ONLY
8 154007 2 1/4” Tinnerman Push On Fastener
9 150005 2 #6-32 x 1/4” Round Head Machine Screw
10 818086 1 Microprocessor Sensor Bracket Assemblies Complete

(includes illus. nos. 1 through 10)

322080 1 Universal Sensor Bracket ONLY
11 122604 1 4-Pin Connector ONLY
12 122700 4 Pin T erminal ONLY
13 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
14 150005 5 #6-32 x 1/4” Slotted Round Head Machine Screw
15 130111 1 130º Thermostat
16 130100 1 150º Thermostat
17 130301 1 225º Manual Reset Thermostat
18 130101 1 180º Thermostat
19 153010 5 #6 S tar Washer
20 152000 5 #6-32 Hex Nut
21 882535 1 Sensor Jumper
22 121028 4 Insulated T erminal ONL Y
23 122701 4 Socket T erminal ONLY

122801 1 Pin/Socket Extraction T ool
24 122605 1 4-Pin Socket Connector ONLY

882534 1 Sensor Bracket Harness Assembly

(includes illus. nos. 22 through 24)

25 818083 1 Noncomputer Sensor Bracket Assembly Complete - Includes Thermostats

(includes illus. nos. 14 through 25)

322080 1 Universal Sensor Bracket ONLY
26 122604 1 4-Pin Connector ONLY
27 122700 4 Pin T erminal ONLY
28 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

21

22

Dir ect Spark Ignition (DSI) Burner Assembly

Direct Spark Ignition (DSI) Burner Assembly

Illus. No. Part No. Qty. Description

1 817088 1 Direct Spark Ignition (DSI) Burner Box ONLY

816998** 1 Natural Gas Burner Assembly

(includes illus. nos. 1 through 8 and 10 through 31)

817208** 1 Liquid Propane (L.P.) Gas Burner Assembly

(includes illus. nos. 1 through 8 and 10 through 31)

883297 1 D-30 Liquid Propane (L.P.) Conversion Kit
2 809307 1 Ignitor Probe Assembly
3 152013 2 #6-32 Hex Nut
4 150309 5 #10-16 x 1/2” Hex Head TEK Crimptite Screw
5 1 41 1 0 4 2 Small Tube Burner
6 150108 2 #8-32 x 1/2” Pan Head Machine Screw
7 128941 1 ADC CE Direct Spark Ignition (DSI) Module (3 tries)
8 151001 2 #8-32 Pal Nut
9 140818* 2 #31 Burner Orifice (natural gas)

140801* 2 #51 Burner Orifice (liquid propane [L.P.] gas)
10 141230 1 1/2” Direct Spark Ignition (DSI) Manifold (2-port)
11 318700 1 Pipe Bracket (bent)
12 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
13 128933 1 1/2” 24 VAC CE Gas Valve (natural gas)

883255 1 1/2” 24 VAC CE Gas Valve (liquid propane [L.P.] gas)
14 141317 1 1/2” Bronze Union Elbow
15 142800 1 1/2” x 18” Pipe
16 318700 2 Pipe Bracket (bent)
17 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw
18 817027 1 Direct Spark Ignition (DSI) Module Mounting Bracket
19 142935 1 1/2” BSPT x 1/2” N.P.T. Transition Coupling
20 150005 2 #6-32 x 1/4” Round Head Machine Screw
21 154004 1 Twin Speed Nut
22 150300 9 #10-16 x 1/2” Hex Washer TEK Screw
23 802799 1 Sail Switch Top and Switch Bracket
24 150303 2 #4 x 3/4” Pan Head “A” Machine Screw
25 122200 1 SPST Sail Switch
26 105500 1 Sail Switch Actuator Rod
27 319202 1 Sail Switch Damper (flat)
28 154002 1 1/8” Push On Fastener
29 130201 1 330º Hi-Limit Manual Reset
30 319704 1 Hi-Limit Mounting Bracket
31 152013 2 #6-32 Hex Nut

23

* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.

24

Hot Surface Ignition (HSI) Gas Burner Assembly

Hot Surface Ignition (HSI) Gas Burner Assembly26Electric Oven Assembly

Illus. No. Part No. Qty. Description

1 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw
2 128920 1 Hot Surface Ignitor (HSI) 24V 2-1/2” Long
3 128921 1 Hot Surface Ignition (HSI) Flame Sensor
4 150309 7 #10-16 x 1/2” Hex Head TEK Crimptite Screw
5 1 41 1 04 2 Small T ube Burner
6 150108 2 #8-32 x 1/2” Pan Head Machine Screw
7 130201 1 330º Hi-Limit with Manual Reset
8 151001 2 #8-32 Pal Nut
9 140818* 2 #31 Burner Orifice (natural gas)

140801* 2 #51 Burner Orifice (liquid propane [L.P.] gas)
10 141230 1 1/2” Direct Spark Ignition (DSI) Manifold (2-port)
11 318700 3 Pipe Bracket (bent)
12 150300 7 #10-16 x 1/2” Hex Washer TEK Screw
13 128933 1 CE Gas Valve

883255 1 CE 1/2” Liquid Propane (L.P.) Gas Valve
14 141314 1 90º x 1/2” x 1-1/2” Gas Shutoff Assembly
15 142800 1 1/2” x 18” Pipe
16 850894 1 Hot Surface Ignition (HSI) 15, 25 Burner Box ONLY

817064** 1 Hot Surface Ignition (HSI) Burner Assembly (natural gas)

817065** 1 Hot Surface Ignition (HSI) Burner Assembly (liquid propane [L.P.] gas)

883297* 1 D-30 Liquid Propane (L.P.) Conversion Kit

882604*** 1 Steam to Gas Interface Plate
17 150001 2 Round Head Machine Screw
18 128975 1 CE Hot Surface Ignition (HSI) Module
19 810029 1 Hot Surface Ignition (HSI) Module Mounting Bracket Assembly
20 151000 4 #6-32 Pal Nut
21 154004 1 Twin Speed Nut
22 142935 1 1/2” BSPT x 1/2” N.P .T. T ransition Coupling
23 802799 1 Sail Switch Top and Switch Bracket
24 150303 2 #4 x 3/4” Pan Head “A” Machine Screw
25 122200 1 SPST Sail Switch
26 105500 1 Sail Switch Actuator Rod
27 319202 1 Sail Switch Damper (flat)
28 154002 1 1/8” Push On Fastener
29 318202 1 Rear Burner Air Deflector
30 319704 1 Hi-Limit Mounting Bracket
31 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw

25

* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.
*** Needed when converting steam heat to gas heat.

Electric Oven Assembly

Illus. No. Part No. Qty. Description

1 803003* 1 Small Electric Oven Box ONLY

---------* 1 Electric Oven Assembly Complete
2 ---------* - Electric Element
3 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
4 802800 1 Sail Switch Box with Bracket and Cover ONLY

802801 1 Sail Switch Box Assembly Complete

(includes illus. nos. 4 through 12)
5 154004 1 Twin Speed Nut
6 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
7 802799 1 Sail Switch Box Cover ONL Y
8 122200 1 Sail Switch ONLY
9 150303 2 #4 x 3/4” Pan Head “A” Machine Screw
10 105500 1 Sail Switch Actuator Rod
11 319202 1 Sail Switch Damper (flat)
12 154002 1 1/8” Push On Fastener
13 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
14 803100 1 Electric Oven Front Cover ONLY
15 320611 1 Large Relay Box Cover ONLY
16 150301 3 #8-18 x 7/16” Phillips Pan Head TEK Screw
17 130400 1 290º Hi-Limit Thermostat
18 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
19 154001 1 #10-24 Speed Nut
20 121010 1 L-70 Ground Lug
21 152014 3 1/4-20 Free Spin Wash Nut
22 --------* 1 Oven Relay
23 --------* 1 Oven Relay Replacement Coil
24 120081 - Internal Ceramic Insulator (2 per element)
25 120080 - External Ceramic Insulator (2 per element)
26 152008 - #10-32 Hex Nut (4 per element)
27 121011* - Bus Bar
28 --------* - Oven Wire with Crimp Lug
29 153009 - #10 Star Washer (2 per element)
30 321300 1 Small Electric Oven Right Side Cover ONLY
31 150207 1 #10-24 x 1/2” Phillips Head Machine Screw

882604** 1 Steam to Electric Interface Assembly

27

* Refer to Electrical Oven Component Application Chart on
** Needed when converting steam heat to electric heat.

page 35.

28

Rear Electric Relay Panel Assembly

Rear Electric Relay Panel Assembly

Illus. No. Part No. Qty. Description

1 151000 2 #6-32 Pal Nut
2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
3 150008 2 #6-32 x 1-1/4” Phillips Pan Head Machine Screw
4 120716 1 2-Position T erminal Block
5 322812 1 Rear Electric Mounting Plate ONLY

822798 1 Rear Electric Panel Assembly Complete - 230 Volt 1ø

(for gas models Only)

(includes illus. nos. 1 through 14)

830273 1 Rear Electric Panel Assembly Complete - 230 Volt 1ø

(for steam models)

(includes illus. nos. 1 through 14)

830426 1 Rear Electric Panel Assembly Complete - 415 Volt 3ø with 1ø Motor

(for electric models)

(includes illus. nos. 1 through 14 and 16)
6 822799 1 Transformer Assembly - 230 Volt 1ø

830141 1 Transformer Assembly - 415 Volt 3ø
7 136008 2 Fuse Holder ONLY
8 136057 2 1/2-Amp (Slo-Blo) Fuse ONLY
9 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
10 150297 1 #10 x 1/2” Green Hex Washer TEK Screw
11 152004 1 5/16-18 Hex Nut
12 121010 1 L-70 Ground Lug
13 153002 1 5/16” Lock Washer
14 132495 1 3-Pole Contactor
15 121300 3 Open/Closed Bushing
16 131932 1 24V SPST Relay

(for electric heated models Only)

29

30

S.A.F.E. T emperatur e Probe Assembly

Illus. No. Part No. Qty. Description

1 822752 1 S.A.F.E. Temperature Probe Assembly

(includes illus. nos. 1 through 5)
2 154007 2 Push On Fastener
3 390390 1 Sensor Bracket (Only)
4 150301 2 #8-18 Phillips Pan Head TEK Screw
5 122647 1 Connector ONLY

S.A.F.E. Solenoid and Piping Assembly

31

Illus. No. Part No. Qty. Description

1 165114 1 S.A.F.E. Solenoid Valve 24V 50/60 Hz
2 143220 1 3/8” F.P.T. Brass Tee
3 143251 1 3/8” M.P.T. Brass Plug
4 143208 2 3/8” Comp x 3/8” M.P.T. Brass Connector
5 143099* 6' 3/8” OD x 0.035 W all Copper T ubing
6 311588 1 Sprinkler Head Mounting Plate
7 143303 1 3/8” N.P.T. Brass Locknut
8 143155 1 3/8” Brass Elbow 90°
9 150430 2 #10 x 1/2” Self Drilling Screw
10 150301 2 #8-18 x 7/16” TEK Screw
11 143581 1 3 GPM 3/8” F.P.T. Spray Nozzle
12 142887 1 3/4” to 3/8” Bushing for FSS Valve
13 824081 1 R.C. Network Assembly

* Sold by the foot.

32

Steam Coil/Air -Operated Steam Damper Assembly

Steam Coil/Air -Operated Steam Damper Assembly

Illus. No. Part No. Qty. Description

1 165013 1 Steam Coil Assembly
2 153002 6 5/16” Lock Washer
3 152004 6 5/16-18 Hex Nut
4 152002 4 1/4-20 Hex Nut
5 153007 4 1/4” Lock Washer
6 820321 2 Steam Damper Hinge Assembly
7 880835 1 Steam Damper Assembly

(includes illus. nos. 7, 10, and 11)
8 153007 4 1/4” Lock Washer
9 152002 4 1/4-20 Hex Nut
10 115995 48 Steam Damper Gasket (sold by the inch)
11 102350 1 Steam Damper Foam (68-1/2” length)
12 151006 1 5/16-24 Stainless Steel Acorn Nut
13 152051 1 5/16-24 Right Hand Jam Nut
14 100495 1 11/16” Dia. x 3” Stroke Piston
15 323365 2 Left and Right Piston Support
16 152002 2 1/4-20 Hex Nut
17 153007 2 1/4” Lock Washer
18 100472 1 1/4” Poly x 1/8” M.P.T. Connector
19 143110 1 1/4” Poly-Flo Tubing
20 100472 1 1/4” Poly x 1/8” M.P.T. Connector
21 100496 1 1/8” Needle Valve
22 143238 1 1/8” Brass Close Nipple
23 100498 1 3-Way Micro Valve - 24 VAC
24 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
25 153010 2 #6 S tar Washer
26 152000 2 #6-32 Hex Nut
27 330987 1 Micro V alve Support
28 152002 2 1/4-20 Hex Nut
29 153007 2 1/4” Lock Washer
30 100520 1 1/8” N.P.T. Silencer (muffler)

33

34

Outer Top/Back Guard Assemblies

Illus. No. Part No. Qty. Description

1 322809 1 Back Electrical Box Cover
2 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
3* 314424 1 Gas Top Back Guard

322075 1 Electric Top Back Guard
4 150301 7 #8-18 x 7/16” Phillips Pan Head TEK Screw
5 150300 10 #10-16 x 1/2” Hex Washer TEK Screw
6* 312545 1 Outer Top
7 322082 1 Bottom Back Guard
8 150301 13 #8-18 x 7/16” Phillips Pan Head TEK Screw
9 103500 4 Leveling Leg

* There is no outer top or top back guard on steam models.

Electrical Oven Component Application Chart

wKegatloVesahPeriW

81514Ø34ro30696486370002118#8552881010121133APD253131

* When ordering Oven Assembly Complete, specify 3 wire or 4 wire when applicable, as well as if dryer has microprocessor controls.

nevO

*ylbmessA

.ytQwK.oNtraP.ytQeziS.oNtraP.ytQ.oNtraP.oN.taC.oNtraP

tnemelE

eriWnevO

lanimreTpmirChtiw

guLlanimreT

raBsuB

:N/P

110121

yaleRnevO

35

36

Part No. Description

114006 “WARNING - Fire Hazards” Label
112280 “Clean Lint Screen” Label
114001 “CAUTION - Exhaust/Lint Screen” Label
114521 “Phase 7 OPL Program Location Summary” Label
120100 3/8” Straight (BX) Connector
120300 3/8” x 45º (BX) Connector
120400 3/8” Red Jacket (BX) Insulator
120500 3/8” Jiffy Clip (BX retainer clip)
120600 3/8” Greenfield (BX)
120707 (2-position) Terminal Strip
120708 (3-position) Terminal Strip
120800 1/4” In-Line Connector
120802 Red Butt Connector
120902 #74B Wire Nut
120903 Crimp-On Wire Nut
121014 1/4” Insulated (female) Terminal
121026 Tab Receptacle Combination
121499 5-1/2” Harness Tie
121500 8” Harness Tie
122804 Manometer (hydro gauge) for Measuring Gas Pressure
404502 White Brush-In-Cap Bottle Touch-Up Paint

Additional Parts Available

ADC 450589 1 - 03/29/02-15 2 * 10/16/02-15