American Dryer GXT6-55 Specifications
®
GXT MODEL REFERENCE CHART
ELECTRICAL RATINGS
ABS
White
GXT6
GXT8
GXT6-C
GXT8-C
Steel
Chrome
GXT6-M
GXT8-M
Steel
White
110-120
208-240
Volts Amps Watts
12.5
6.5
1500
1500
Recessed Mounting is available by designating (R) after model no.
or order kit separately.
All models 50/60 Hz
GXT6-SS
GXT8-SS
Stainless
Steel
FASTEST
eXtremeAir
gXt
Series
SPECIFICATIONS
www.americandryer.com
THE MOST COMPACT
HIGH SPEED ENERGY EFFICIENT
HAND DRYERS - MADE IN THE U.S.A.
4”
GXT-M Series
Metal, White Epoxy Finish
gXt
SERIES
MAXIMUM
performance
best selling • energy efficient
GXT-C Series
Metal, Satin Chrome Finish
80%
95% COST SAVINGS
16,000 LFM Air Velocity 135˚ F Air Temperature
Comparison of EnErgy pEr UsE
GXT-MR Recessed Mount
Reduces Depth to Less Than 4”
3 X FASTER
LESS ENERGY
83 dB Sound Level
743 KJ
10-12
seconds
Drying Time
1500
Power
watts
460 KJ
233 KJ
51 KJ
EXTREMEAIR
gXt
HAND DRYE R
Energy is measured in KiloJoules (KJ). Lower
numbers represent less energy use and less cost.
STANDARD
ELECTRI C
DRYER
PAPER
TOWELS
100% Rec ycled
content
VIRGIN
PAPER
TOWELS
®
Overview:
The
eXtremeAir
FOR THE NEXT GENERATION
is THE HIGH SPEED HAND DRYER
TM
. The patented
design is the most compact and affordable high speed
hand dryer made in the U.S.A.
Construction Features:
DRYER PLACEMENT - Dryers should be placed at least 2 feet
apart and at least 12” from washbasin. Do not install dryer
over washbasin. Automatic dryers should be at least 18” above
any projection which may interfere with the operation of the
automatic sensor.
ELECTRICAL REQUIREMENTS - Each dryer must be con-
nected to a dedicated 15 or 20 amp line.
MOST COMPACT high performance hand dryer in the
industry. It’s 43% smaller than old “industry standard”
high speed dryers; yet, it’s just as powerful and uses less
electricity.
COMPETITOR
E
XTREMEAIR
®
43%
SMALLER
VANDAL RESISTANT – Two tamper resistant screws secure
the heavy duty vandal resistant cover to the steel base.
Motor and heater are inaccessible to vandals. Air intake is
shielded for additional safety.
HEAVY DUTY ONE-PIECE COVER OPTIONS –
Flame retardant white ABS
Steel with white epoxy finish (M)
Steel with satin chrome finish (C)
Stainless steel with #4 brush finish (SS)
MOTOR
discharge vacuum motor/blower with automatic resetting
thermal protector. 5/8 HP, 24,000 RPM.
AUTOMATIC SENSOR –
design. Microprocessor controlled infrared sensor turns
dryer on when hands are under the outlet for up to 80
seconds.
HEATING – element to instantly raise the air temperature
to 135˚F. The heating element has an automatic thermal
protector and operates in the black range for maximum
life.
WARRANTY – 5-year limited warranty with same-day
factory repair or shipment of replacement parts.
–
Powerful series commutated through-flow
roHs compliant lead-free
MOUNTING - One side of dryer should be mounted to stud.
All surface mount dryers are provided with conduit entrances
for both between-wall and surface wiring.
Quantity Estimate:
Average traffic washroom..............1 dryer per 2 washbasins
Heavy traffic washroom..................1 dryer per washbasin
54” wash fountain...........................4 dryers per sink
Universal Adapter Plate (AP)
14 gauge stainless steel plate
(14” H x 16” W) used to
cover holes from older bulky
hand dryers and paper towel
dispensers being replaced.
5-5/8
(143mm)
(11mm)
8-3/16
(208mm)
(11mm)
Figure 1 -
(102mm)
FRAME INSIDE
ROUGH OPENING
TRIM PIECE
12-3/4 W X 11-7/8 H
(324mm X 302mm)
2 (51mm) DEPTH OF BOX
7/16
7/16
8-15/16
(227mm)
8-7/16
(214mm)
9-13/16
(249mm)
gXt
Series Sur face Mount
4
FINISHED WALL
ROUGH WALL
1 (25mm)
CONDUIT
ENT.
9-5/8 (245mm)
MOUNTING HOLES FOR
1/4” (M6) DIA. SCREWS
1-7/8 (48mm)
7/8 (22mm) DIA. IN-WALL
& SURFACE CONDUIT
ENTRANCES
OPENING
12-3/16
(310mm)
(251mm)
2-5/16
9-1/16
(230mm)
9-7/8
(58mm)
DIMENSIONS: Surface: 10-1/8” W x 9-3/8” H x 5-5/8” D
MOUNTING HEIGHTS:
Men 44”
Women 42”
Children 32-42”
Handicapped 36”
SHIIPPING WEIGHT:
USC
gXt
9 lbs,
gXt
-M/C
11 lbs
MADE IN U.S.A.
Figure 2 -
gXt
-MR Series Recessed Mount
American Dryer, Inc.
12932 Farmington Road I Livonia I MI I 48150 I U.S.A.
Toll Free 800.485.7003 U.S. I Ph: 734.421.2400 I Fax 734.421.5580
Web: www.americandryer.com
Email: sales@americandryer.com
© American Dryer, Inc. All Rights Reserved. Re. June 2010
Loading...