American Dryer GX1-M User Manual
GLOBAL GX HAND DRYER SPECIFICATIONS
ons
GLOBAL
120 CFM (Cubic Feet per Min.)
®
®
White ABS
White Steel
THE GLOBAL ECONOMY SERIES HAND DRYER
PROVIDES A QUIET AND COMPACT DESIGN TO FIT ANY BUDGET.
FEATURES:
• VANDAL RESISTANT
• 3 YEAR WARRANTY
Construction Features:
HEAVY DUTY ONE-PIECE COVER OPTIONS
Flame retardant white ABS
Steel with white epoxy finish (M)
Steel with black graphite epoxy finish (BG)
Steel with satin chrome finish (C)
VANDAL RESISTANT – Tamper resistant screws
secure cover to base. Air intake vents are shielded
for additional safety.
Black Graphite
Satin Chrome
specificati
AIR FLOW
GLOBAL model reference chart
MOTOR – Permanently lubricated,
maintenance-free, brushless induction motor with
automatic resetting thermal protector. 1/12 HP,
3100 RPM.
AUTOMATIC SENSOR – RoHS compliant lead-free
design. Microprocessor controlled infrared sensor
turns dryer on when hands are under the outlet for
up to 60 seconds.
HEATING ELEMENT – Constructed of NiChrome
resistance wire with thermal protector. Heating
element operates in the black range for
maximum life.
NEW
ACCESSORIES
ADA-WG
WALL GUARD
For more information, visit americandryer.com
ADA-RK
RECESS KIT
ADAPTER PLATE
AP
ACCESSORIES
®
NEW
SAVE 95% VERSUS PAPER TOWELS
GX Series Hand dryers achieve up to a 95% cost savings over
paper towels. These savings are realized by eliminating the
maintenance and operating expenses associated with paper or
linen towels.
“Our school saved over $21,000
last year with American Dryer!”
COST ANALYSIS FOR A PUBLIC SCHOOL
Paper Towel Usage 800 CASES
ADA-WG
WALL GUARD
ADA-RK
RECESS KIT
ADAPTER PLATE
Accessories Reference Chart
ADA-WG
ADA-RK
AP
ADA Compliant seamless stainless steel wall guard
ADA Compliant seamless stainless steel recess kit
Stainless steel universal adapter plate
For more information, visit americandryer.com
GX SERIES MOUNTING DIAGRAMS
5-5/8
(143mm)
7/16
(11mm)
8-3/16
(208mm)
7/16
(11mm)
GLOBAL Series Surface Mount
8-15/16
(227mm)
8-7/16
(214mm)
9-13/16
(249mm)
MOUNTING HOLES FOR
1/4 (M6) DIA. SCREWS
1-7/8 (48mm)
7/8 (22mm) DIA. IN-WALL
& SURFACE CONDUIT
ENTRANCES
AP
9 1/16
(230mm)
Total Paper Costs $24,000
Hand Dryer Operating Costs $2,453
ANNUAL SAVINGS
Payback Time
$
21,547
11 MONTHS
COST ANALYSIS FOR A RESTAURANT
Paper Towel Usage 90 CASES
Total Paper Costs $2,025
Hand Dryer Operating Costs $96
ANNUAL SAVINGS
Payback Time
GENERAL INFORMATION
DRYER PL ACEMENT :
Dryers should be placed at least 2 feet apart and at least 12” from
washbasin. Do not install dryer over washbasin. Automatic dryers
should be at least 18” above any projection which may interfere with
the operation of the automatic sensor. In congested areas the dryers
should be located to create a flow from the washbasin to dryer to exit.
Recommended mounting heights are shown in the table below.
$
1,929
12 MONTHS
DRYER INSTALLATION:
Dryers must be installed by a licensed electrician. A single phase
dedicated 15 amp or 20 amp electrical line is required. Dryer must be
properly grounded. One side of dryer should be mounted to a stud.
All surface mount dryers are provided with conduit entrances for both
in-wall and surface wiring.
QUANTITY ESTIMATE, HAND DRYER:
Average traffic washroom..............1 dryer per 2 washbasins
Heavy traffic washroom..................1 dryer per washbasin
54” wash fountain...........................4 dryers per sink
SHIPPING WEIGHT: GX 8 lbs, GX-M/BG/C 10 lbs
American Dryer, Inc.
33067 Industrial Road I Livonia, MI 48150 I U.S.A.
Toll Free 800.485.7003 U.S. I Ph: 734.421.2400 I Fax 734.421.5580
Web: www.americandryer.com
Email: sales@americandryer.com
© American Dryer, Inc. All Rights Reserved
Revised July 2013
C
Printed on Recycled Paper
US
MADE IN THE
A
US
E
ST. 1952
Loading...