American Dryer AD-80i Parts Diagram

AD-80i

Parts Manual

American Dryer Corporation

88 Currant Road

Fall River MA 02720-4781 USA

Telephone: [phone] / Fax: [phone]

e-mail: [e-mail]

www.adclaundry.com

ADC Part No. 450455-1

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included
with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right
to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.

POUR VOTRE SÉCURITÉ

Important

For your convenience, log the following information:

DATE OF PURCHASE ___________________________________________________ MODEL NO. _______________

RESELLER’S NAME _________________________________________________________________________________

Serial Number(s) _____________________________________________________________________________________

AD-80i

____________________________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department
at [phone]. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.

2 American Dryer Corporation 450455-1

Table of Contents

Non-Coin Control Door Assembly............................................................................................................ 4

Phase 7 Non-Coin Microprocessor Control Box Assembly......................................................................5

Front Panel Assembly .............................................................................................................................6

Main Door Assembly................................................................................................................................7

Main Door Switch Assembly .................................................................................................................... 8

Tumbler / Support Assemblies................................................................................................................. 9

Front Support Wheels ...........................................................................................................................10

Lint Coop Sensor Assemblies................................................................................................................ 11

Lint Door Assembly ...............................................................................................................................12

Lint Trap Assembly ................................................................................................................................ 13

Tumbler Bearing Assembly.................................................................................................................... 14

Blower Motor Mount Assembly .............................................................................................................. 15

Drive Motor Mount Assembly................................................................................................................. 16

Gas Burner Assembly............................................................................................................................ 17

Gas Burner Box and Preheat Conduit ................................................................................................... 18

Electric Burner Assembly.......................................................................................................................19

Electric Oven Contactor Assembly ........................................................................................................20

Electric Heat Terminal Block Panel........................................................................................................ 21

Rear Electrical Panel Assembly............................................................................................................. 22

VFD and Sail Switch Assemblies...........................................................................................................23

Outer Top / Back Guard Assemblies......................................................................................................24

Fire Suppression Assembly ................................................................................................................... 25

Additional Parts Available ...................................................................................................................... 26

450455-1 www.adclaundry.com 3

Non-Coin Control Door Assembly

Illus. No. Part No. Qty. Description

1 160015 1 Lock and Key

160032 1 1” Straight Cam

2 884483 1 Phase 7.2 Non-Coin Computer with S.A.F.E. System Option

884484 1 Phase 7.2 Non-Coin Computer without S.A.F.E. System Option
3 150300 8 #10-16 x 3/4” TORX PLUS® BTN Type 1
4 317162 1 Control Door Hinge Bracket
5 817766 1 Non-Coin Control Door with Graphics
6 112610 1 Phase 7.2 Non-Coin Keypad (blue)
7 150005 5 #6-32 x 1/4” Phillips Screw
8 153010 4 #6 Star Washer
9 102603 1 Control Door Rod Support Catch
10 102502 1 Control Door Support Rod
11 102601 1 Control Door Retainer Clip

4 American Dryer Corporation 450455-1

Phase 7 Non-Coin Microprocessor Control Box Assembly

Illus. No. Part No. Qty. Description

1 122681 1 10-Pin Connector
2 122676 1 8-Pin Connector
3 122646 1 2-Pin Connector
4 122683 1 6-Pin Terminal
5 122640 1 9-Pin Terminal
6 122706 * #20-16 U.M.N.L. Socket
7 122669 * Female Crimp Terminal

* As needed.

450455-1 www.adclaundry.com 5

Front Panel Assembly

Illus. No. Part No. Qty. Description

1 817769 1 Front Panel Assembly

(includes illus. nos. 1 through 10)

817768 1 Front Panel
2 102004 2 Compact Door Magnet
3 152223 2 #10-32 x 1/2” Machine Screw
4 150331 10 #8-18 x 1/2” Pan Head TORX® Screw
5 116236 1 Front Panel Insulation
6 317192 1 Front Panel Reversible Bottom Trim
7 335508 2 Door Stop
8 154205 4 5/32” x 1/4” Stainless Steel Rivet
9 121401 1 Rubber Grommet
10 117617 4 Foam Gasket (sold by the foot)

6 American Dryer Corporation 450455-1

Main Door Assembly

Illus. No. Part No. Qty. Description

1 817750 1 Main Door Assembly Complete

(includes illus. nos. 1 through 8)

835617 1 Main Door Ring Assembly

(includes illus. nos. 1, 6, and 7)

2 817749 1 Door Outer Skin Assembly

(includes illus. nos. 2 and 6)
3 319298 2 Magnet Bracket
4 150445 4 1/4-20 x 3/4” Black Cap Head Setscrew
5 817751 1 Door Handle Assembly
6 102227 2 Main Door Glass

401038 1 Black Glass Adhesive (10.3 oz. cartridge)

7 882411 1 Door Gasket

401038 1 Black Gasket Adhesive (10.3 oz. cartridge)
8 152014 6 1/4-20 Free Spin Wash Nut
9 153031 1 1/4” Nylon Washer
10 881151 1 Black Bottom Hinge Block Assembly

(includes illus. nos. 4, 9, and 10)

11 881152 1 Black Top Hinge Block Assembly

(includes illus. nos. 4 and 11)

450455-1 www.adclaundry.com 7

Main Door Switch Assembly

Illus. No. Part No. Qty. Description

1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Door Switch
5 122636 2 Flag Terminal
6 881211 1 Black Main Door Switch Housing ONLY

881153 1 Black Main Door Switch Housing Complete

(includes illus. nos. 1 through 4 and 6)

7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

8 American Dryer Corporation 450455-1

Tumbler / Support Assemblies

Illus. No. Part No. Qty. Description

1 817783 1 Stainless Steel Tumbler / Support Assembly

(includes illus. nos. 1 through 12)

817742 1 Galvanized Tumbler / Support Assembly

(includes illus. nos. 1 through 12)
2 115154 1 Front Felt Collar
3 317112 4 Stainless Steel Tumbler Rib

317177 4 Galvanized Tumbler Rib
4 150407 1 5/16-18 x 3/4” Socket Button Head Screw
5 100905 4 0.375-16 x 37” Tie Rod
6 153004 4 3/8” Flat Washer
7 817784 1 Tumbler Support
8 152027 4 3/8-16 Hex Nylon Insert Lock Nut
9 153005 4 3/8” Lock Washer
10 153004 4 3/8” Flat Washer
11 115927 1 Rear Felt Collar
— 401010 1 #847 Adhesive for Felt Collar (5.0 oz. tube)
12 100812 1 1-3/8” Retaining Clip

450455-1 www.adclaundry.com 9