Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety . If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONL Y qualified technicians should service this equipment.
OBSERVEALL SAFETYPRECAUTIONS displayed on the equipment or specified in the installation manual included
with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to
make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.
POUR VOTRE SÉCURITÉ
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________________________________MODEL NO. ______________
RESELLER’S NAME _________________________________________________________________________________
Serial Number(s)_____________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory . When ordering replacement part s from the
factory , you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department
at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly . The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORT ANT NOTE T O PURCHASER”
Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.
Table of Contents
Non-Coin Control Door Assembly for Models Mfd. as of July 1, 2002......................................................................................... 4
Coin Control Door Assembly for Models Mfd. as of July 1, 2002................................................................................................. 5
Control Door Assembly for Models Mfd. prior to July 1, 2002 ...................................................................................................... 6
Phase 5 Coin Microprocessor Control Panel Assembly ............................................................................................................. 7
Phase 5 Non-Coin Microprocessor Control Panel Assembly ..................................................................................................... 8
Coin and Non-Coin Control Box Assembly .................................................................................................................................. 9
Dual Timer “Tap Touch” Controls for Models Mfd. as of November 1, 2000 ..............................................................................11
Dual Timer Control Panel Assembly for Models Mfd. prior to November 1, 2000 .................................................................... 12
Non-Microprocessor Coin Meter Control Panel Assembly for Models Mfd. as of January 25, 2002 ....................................... 13
Non-Microprocessor Coin Meter Control Panel Assembly for Models Mfd. prior to January 25, 2002 .................................... 14
Front Panel Assembly for Models Mfd. with Steel Main Door ..................................................................................................... 15
Front Panel Assembly for Models Mfd. with Plastic Main Door.................................................................................................. 16
Main Door “Steel” Assembly ........................................................................................................................................................ 17
Plastic Main Door Assembly........................................................................................................................................................ 18
Main Door Switch Assembly for Models Mfd. with Steel Main Door ........................................................................................... 19
Main Door Switch for Models Mfd. with Plastic Main Door ......................................................................................................... 20
Lint Drawer / Lint Drawer Switch Assemblies for Models Mfd. prior to August 10, 2000 and as of April 19, 2003 .................. 21
Lint Drawer / Lint Drawer Switch Assemblies for Models Mfd. between August 10, 2000 and April 18, 2003 ........................ 22
Tumbler Bearing Assembly for Models Mfd. as of July 17, 2000 ............................................................................................... 24
Tumbler Bearing Assembly for Models Mfd. prior to July 17, 2000............................................................................................ 26
Tumbler / Support Assemblies ................................................................................................................................................... 28
Non-Reversing T.E.F.C. Motor Mount Assembly ......................................................................................................................... 30
Reversing T.E.F.C. Motor Mount Assembly ................................................................................................................................. 32
Direct Spark Ignition Burner Assembly for Models Mfd. as of April 7, 2000............................................................................... 36
Direct Spark Ignition Burner Assembly for Models Mfd. prior to April 7, 2000............................................................................ 37
Electric Oven Assembly ............................................................................................................................................................... 38
Gas Burner Sail Switch / Hi-Limit Assemblies ........................................................................................................................... 40
Single-Phase (1ø) Motor, Electric Relay Panel Assembly.......................................................................................................... 41
3-Phase (3ø) Motor, Electric Relay Panel Assembly .................................................................................................................. 42
Outer Top / Back Guard Assemblies........................................................................................................................................... 49
Coin Meter Replacement Parts ................................................................................................................................................... 51
Electric Oven Component Application Chart ............................................................................................................................... 52
Additional Parts Available ............................................................................................................................................................ 53
Non-Coin Control Door Assembly
For Models Mfd. as of July 1, 2002
Illus. No.Part No.Qty .Description
18810531ADC Logo with Tape
8700111Double Sided Tape Kit
28835501White Control Door Assembly
(includes illus. nos. 2 and 3)
8835511Ivory Control Door Assembly
(includes illus. nos. 2 and 3)
8835521Coral Blue Control Door Assembly
(includes illus. nos. 2 and 3)
31176043Neoprene Sponge Tape (sold by the foot)
41503172#10-16 x 3/4” TORX PLUS
51026031Control Door Rod Support Catch
61026011Control Door Rod Retainer Clip
71025021Control Door Support Rod
81503212#10-32 x 1/2” Phillips Machine Screw
91540112#10-32 Multi-Thread U-Nut
4American Dryer Corporation450345 -4
®
BTN T ype 1
Coin Control Door Assembly
For Models Mfd. as of July 1, 2002
Illus. No.Part No.Qty .Description
11600151High Security Lock Assembly
1601041Key ONLY
21600161Lock Cam ONLY
38810531ADC Logo with Tape
48834771White Control Door Assembly with Black Trim
(includes illus. nos. 4 through 7)
8834781Ivory Control Door with Black Trim
(includes illus. nos. 4 through 7)
8835491Coral Blue Control Door with Black Trim
(includes illus. nos. 4 through 7)
58834761Black Trim Strip with Lock Hole
61176046Neoprene Sponge Tape (sold by the foot)
715201441/4-20 with 3/4” Free Spin Wash Nut
81503172#10-16 x 3/4” TORX PLUS
91026031Control Door Rod Support Catch
101026011Control Door Rod Retainer Clip
111025021Control Door Support Rod
1600171Special Dummy Lock ONLY (for non-coin models Only)
1601041MK-100 Key ONLY
21600521Lock Cam ONLY
38810531ADC Logo with Tape
8700111Double Sided Tape Kit
48825111White High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
8825131Almond “B” High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
8825121Coral Blue High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
8825091Stainless Steel High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
51176033Noise Suppressor Tape (sold by the foot)
61503002#10-16 x 1/2” Hex Washer TEK Screw
71026031Control Door Rod Support Catch
81503002#10-16 x 1/2” Hex Washer TEK Screw
91025021Control Door Support Rod
101026011Control Door Rod Retainer Clip
6American Dryer Corporation450345 -4
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No.Part No.Qty .Description
11125261Coin Keypad Label Assembly
28835371Phase 5 Coin Control Panel Assembly
(for models mfd. as of June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
8835381Phase 5 Coin Control Panel Assembly with Battery Option
(for models mfd. as of June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
8835821Phase 5 Coin Control Panel Assembly with Battery Option
(for models mfd. prior to June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
8835811Phase 5 Coin Control Panel Assembly
(for models mfd. prior to June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
8835391Coin Control Panel ONLY
(for models mfd. as of June 25, 2002)
8835401Coin Control Panel ONLY with Battery Bracket
(for models mfd. as of June 25, 2002)
8835801Coin Control Panel ONLY
(for models mfd. prior to June 25, 2002)
8835791Coin Control Panel ONLY with Battery Bracket
(for models mfd. prior to June 25, 2002)
31503091#10-16 x 1/2” Hex Head TEK Crimptite Screw
41372131Phase 5 Coin Controller
8249981Phase 5 Battery Clip
51530102#6 Star Washer
61500052#6-32 x 1/4” Phillips Round Head Machine Screw
7––––––1Microprocessor Coin Acceptor
(refer to Microprocessor Coin Acceptors Listing on page 50)
8––––––1Optic Switch ONLY
(refer to Microprocessor Coin Acceptors Listing on page 50)
91370231Optic Switch Connector
101370213Microprocessor Socket
(Italian, Dutch, French, German, and Chinese) … Not Illustrated
28012551Phase 5 Microprocessor Control Panel ONLY
8012561Phase 5 Microprocessor Control Panel with Battery Bracket
8012061Phase 5 Non-Coin Non-Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 6)
8012071Phase 5 Non-Coin Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 6)
31372221Phase 5 Non-Coin Non-Reversing Controller
1372311Phase 5 Non-Coin Reversing Controller
8249981Phase 5 Battery Clip
41530102#6 Star Washer
51500052#6-32 x 1/4” Phillips Round Head Machine Screw
61503091#10-16 x 1/2” Hex Head TEK Crimptite Screw
713604811/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
8American Dryer Corporation450345 -4
Coin and Non-Coin Control Box Assembly
Illus. No.Part No.Qty .Description
11320021Transformer
(for mechanical steam damper models – 208 VAC and higher Only)
21503002#10-16 x 1/2” Hex Washer TEK Screw
31503012#8-18 x 7/16” Phillips Pan Head TEK Screw
41319311Steam Valve Relay – 24 VAC
850392–Dual Timer Panel ONLY
91530102#6 Star Washer
101520003#6-32 Hex Nut
111502072#10-24 x 1/2” Phillips Pan Head Machine Screw
121501104#8-32 x 1/4” Phillips Round Head Machine Screw
131125631Dual Timer Panel Overlay
141241041Pure Touch Knob with Red Pointer
151241051Pure Touch Knob with Blue Pointer
8826001Dual Timer Reversing Control Panel Assembly Complete – 24 VAC
(includes illus. nos. 1 through 17)
8504561Dual Timer Control Panel ONLY
41319171Push-To-Start Relay – 24 VAC
51502072#10-24 x 1/2” Phillips Pan Head Machine Screw
61540012#10-24 Speed Nut
71520002#6-32 Hex Nut
81530102#6 Star Washer
9120730130-Position Terminal Block
101501104#8-32 x 1/4” Phillips Round Head Machine Screw
111319321Dual Timer Relay – 24 VAC
121510004#6-32 Pal Nut
131120501Dual Timer Label
141241032Arrow Timer Knob
15124025160-Minute Timer – 24 VAC
16124030115-Minute Timer – 24 VAC
171321981Reversing Timer – 24 VAC
—8825401Panel Wiring (non-reversing panel) … Not Illustrated
—8825731Panel Wiring (reversing panel) … Not Illustrated
12American Dryer Corporation450345 -4
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. as of January 25, 2002
Illus. No.Part No.Qty .Description
11230051Red Indicator Light – 24 VAC
21224001Rocker Heat Selector Switch
38241721Coin Meter Control Panel Assembly Less Coin Meter
(includes illus. nos. 2 through 5, 7, and 8)
8241091Coin Meter Control Panel ONLY
4131932124 VAC Relay
1540012#10-24 Speed Nut (used on P/N: 131932, 24 VAC relay)
51232251Green Push-To-Start Button
6125601125¢ Coin Meter – 24 VAC (specify timing)
71530102#6 Star Washer
81520162#4-40 Hex Nut
9120712112-Position Terminal Block
101503001#10-16 x 1/2” Hex Washer TEK Screw
1112260219-Pin Connector
121227007Pin Terminal
—1228011Pin Extraction Tool
NOTE: For Coin Meter Replacement Parts refer to page 51.
450345 -4www.amdry.com13
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. prior to January 25, 2002
Illus. No.Part No.Qty .Description
11230051Red Indicator Light – 24 VAC
21224001Rocker Heat Selector Switch
38240201Coin Meter Control Panel Assembly Complete – 24 VAC
(includes illus. nos. 1 through 6 and 8 through 12)
8000541Coin Meter Control Panel ONLY
41319171Push-To-Start Relay – 24 VAC
51502072#10-24 x 1/2” Round Head Machine Screw
61540012#10-24 Speed Nut
7*125601125¢ Coin Meter – 24 VAC (specify timing)
81503032#4 x 3/4” Pan Head “A” Screw
9120712112-Position Terminal Block
101503091#10-16 x 1/2” Hex Head TEK Crimptite Screw
1112260219-Pin Connector
121227009Pin Terminal
—1228011Pin / Socket Extraction Tool
* Consult factory for coin meters not listed.
NOTE: For Coin Meter Replacement Parts refer to page 51.
14American Dryer Corporation450345 -4
Front Panel Assembly
For Models Mfd. with Steel Main Door
Illus. No.Part No.Qty .Description
18831371White Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
8831381Coral Blue Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
8831391Ivory Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
215031311#10-16 x 1/2” TORX PLUS
150318125 IP TORX PLUS
3––––––1Main Door Hinge
4––––––1Lint Drawer Switch
(refer to Lint Drawer / Lint Drawer Switch Assemblies on page 21)
51703301Friction Door Latch
615421525/32” Pop Rivet
450345 -4www.amdry.com15
®
®
BTN Type 1
Bit 1/4 Hex (for removal of TORX® head screw)
Front Panel Assembly
For Models Mfd. with Plastic Main Door
Illus. No.Part No.Qty .Description
18825251White Right Hand Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
8825271Almond “B” Right Hand Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
8825281Coral Blue Right Hand Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
215030911#10-16 x 1/2” Hex Head TEK Crimptite Screw
31214051Rubber Grommet
4––––––1Lint Drawer Switch
(refer to Lint Drawer / Lint Drawer Switch Assemblies on page 21)
51703301Friction Door Latch
615421525/32” Pop Rivet
16American Dryer Corporation450345 -4
Main Door “Steel” Assembly
Illus. No.Part No.Qty .Description
18811501Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
21023541Door Gasket
1707311Black Gasket Adhesive (10.7 oz. cartridge)
38811521Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
415044521/4-20 x 3/4” Black Cap Head Setscrew
515303111/4” Nylon Washer
68811511Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7)
715044521/4-20 x 3/4” Black Cap Head Setscrew
815068331/4-20 x 5/8” Black Carriage Bolt
915201431/2-20 Free Spin Wash Nut
101510101#10-32 Black Hex Acorn Nut
111501201Door Latch Screw
1215068331/4-20 x 5/8” Black Carriage Bolt
1315201431/2-20 Free Spin Wash Nut
148812101Black Main Door Handle ONLY
15102211120-7/16” Door Glass
1707311Black Glass Adhesive (10.3 oz. cartridge)
450345 -4www.amdry.com17
Loading...
+ 37 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.