American Dryer AD-50i Parts Diagram
AD-50i
Parts Manual
American Dryer Corporation
88 Currant Road
Fall River MA 02720-4781 USA
Telephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447
e-mail: techsupport@amdry.com
www.adclaundry.com
ADC Part No. 450454-1
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included
with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right
to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.
POUR VOTRE SÉCURITÉ
Important
For your convenience, log the following information:
DATE OF PURCHASE ___________________________________________________ MODEL NO. _______________
RESELLER’S NAME _________________________________________________________________________________
Serial Number(s) _____________________________________________________________________________________
AD-50i
____________________________________________________________________________________________________
____________________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department
at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.
2 American Dryer Corporation 450454-1
Table of Contents
Non-Coin Control Door Assembly............................................................................................................4
Coin Control Door Assembly ...................................................................................................................5
Phase 7 Non-Coin Microprocessor Control Box Assembly......................................................................6
Front Panel Assembly ............................................................................................................................. 7
Main Door Assembly................................................................................................................................8
Main Door Switch Assembly ....................................................................................................................9
Tumbler / Support Assemblies............................................................................................................... 10
Front Support Wheels ........................................................................................................................... 11
Lint Coop Sensor Assemblies................................................................................................................ 12
Lint Door Assembly ............................................................................................................................... 13
Lint Trap Assembly ................................................................................................................................ 14
Lint Door Support Assembly.................................................................................................................. 15
Tumbler Bearing Assembly.................................................................................................................... 16
Blower Motor Mount Assembly .............................................................................................................. 17
Drive Motor Mount Assembly................................................................................................................. 18
Gas Burner Assembly............................................................................................................................ 19
Gas Burner Box and Preheat Conduit ...................................................................................................20
Electric Burner Assembly.......................................................................................................................21
Electric Oven Contactor Assembly ........................................................................................................ 22
Electric Heat Terminal Block Panel........................................................................................................ 23
Rear Electrical Panel Assembly............................................................................................................. 24
VFD and Sail Switch Assemblies...........................................................................................................25
Outer Top / Back Guard Assemblies......................................................................................................26
Fire Suppression Assembly ................................................................................................................... 27
Additional Parts Available ......................................................................................................................28
450454-1 www.adclaundry.com 3
Non-Coin Control Door Assembly
Illus. No. Part No. Qty. Description
1 160015 1 Lock and Key
160032 1 1” Straight Cam
2 884483 1 Phase 7.2 Non-Coin Computer with S.A.F.E. System Option
884484 1 Phase 7.2 Non-Coin Computer without S.A.F.E. System Option
3 150300 8 #10-16 x 3/4” TORX PLUS® BTN Type 1
4 305243 1 Control Door Hinge Bracket
5 805065 1 Non-Coin Control Door with Graphics
6 112610 1 Phase 7.2 Non-Coin Keypad (blue)
7 150005 5 #6-32 x 1/4” Phillips Screw
8 153010 4 #6 Star Washer
9 102603 1 Control Door Rod Support Catch
10 102502 1 Control Door Support Rod
11 102601 1 Control Door Retainer Clip
4 American Dryer Corporation 450454-1
Coin Control Door Assembly
Illus. No. Part No. Qty. Description
1 805071 1 Coin Stainless Steel Control Door with Graphics
2 150300 10 #10-16 x 1/2” Hex Washer TEK Screw
3 150005 8 #6-32 x 1/4” Phillips Round Head Machine Screw
4 160032 1 Straight 1” Cam
5 160015 1 MK-100 Lock with Hardware
6 305243 1 Control Door Hinge Bracket
7 112575 1 Phase 7 Keypad
8 137270 1 16” x 1” Large Character Display
9 887011 1 Phase 7 Coin Board (for models without S.A.F.E. System)
887012 1 Phase 7 Coin Board (for models with S.A.F.E. System)
10 137250 1 Phase 7 Coin Ribbon Cable
11 102601 1 Control Door Rod Retainer Clip
12 102603 1 Control Door Rod Support Catch
13 102502 1 Control Door Support Rod
14 855117 1 Coin Vault Assembly
15 125917 1 Coin Box
450454-1 www.adclaundry.com 5
Phase 7 Non-Coin Microprocessor Control Box Assembly
Illus. No. Part No. Qty. Description
1 122681 1 10-Pin Connector
2 122676 1 8-Pin Connector
3 122646 1 2-Pin Connector
4 122683 1 6-Pin Terminal
5 122640 1 9-Pin Terminal
6 122706 * #20-16 U.M.N.L. Socket
7 122669 * Female Crimp Terminal
* As needed.
6 American Dryer Corporation 450454-1
Front Panel Assembly
Illus. No. Part No. Qty. Description
1 805100 1 Front Panel Assembly
(for models mfd. as of April 21, 2014)
(includes illus. nos. 1 through 10)
805068 1 Front Panel Assembly
(for models mfd. prior to April 21, 2014)
(includes illus. nos. 1 through 10)
805067 Front Panel ONLY
2 102004 2 Compact Door Magnet
3 152223 2 #10-32 x 1/2” Machine Screw
4 150331 10 #8-18 x 1/2” Pan Head TORX® Screw
5 116359 1 Front Panel Insulation
6 305327 1 Front Panel Reversible Bottom Trim
(for models mfd. as of April 21, 2014)
305287 1 Front Panel Reversible Bottom Trim
(for models mfd. prior to April 21, 2014)
7 335508 2 Door Stop
8 154205 4 5/32” x 1/4” Stainless Steel Rivet
9 121401 1 Rubber Grommet
10 117617 4 Foam Gasket (sold by the foot)
450454-1 www.adclaundry.com 7
Main Door Assembly
Illus. No. Part No. Qty. Description
1 805048 1 Main Door Assembly Complete
(includes illus. nos. 1 through 8)
805033 1 Main Door Ring Assembly
(includes illus. nos. 1, 6, and 7)
2 805046 1 Door Outer Skin Assembly
(includes illus. nos. 2 and 6)
3 319298 2 Magnet Bracket
4 150445 4 1/4-20 x 3/4” Black Cap Head Setscrew
5 805037 1 Door Handle Assembly
6 185498 2 Main Door Glass
401038 1 Black Glass Adhesive (10.3 oz. cartridge)
7 882411 1 Door Gasket
401038 1 Black Gasket Adhesive (10.3 oz. cartridge)
8 152014 8 1/4-20 Free Spin Wash Nut
9 153031 1 1/4” Nylon Washer
10 881151 1 Black Bottom Hinge Block Assembly
(includes illus. nos. 4, 9, and 10)
11 881152 1 Black Top Hinge Block Assembly
(includes illus. nos. 4 and 11)
8 American Dryer Corporation 450454-1
Main Door Switch Assembly
Illus. No. Part No. Qty. Description
1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Door Switch
5 122636 2 Flag Terminal
6 881211 1 Black Main Door Switch Housing ONLY
881153 1 Black Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
450454-1 www.adclaundry.com 9
Loading...