American Dryer AD-50 Parts Diagram

AD-30 / AD-50

Parts Manual

24 VAC Phase 5

1992 thru 2002

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: (508) 678-9000 / Fax: (508) 678-9447

E-mail: techsupport@amdry.com

www.amdry.com

ADC Part No. 450103 - 30

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is

properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME _______________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Table of Contents

AD-30 Coin Control and Single Timer Door Assembly

For Models Mfd. as of July 2, 2002 ................................................................................................ 4

AD-30 Control Door Assembly Without Trim

For OPL (Non-Coin) Models Mfd. between July 19, 1999 and July 2, 2002 ...................................5

AD-30 High Security Control Door Assembly

For Coin Models Mfd. prior to July 2, 2002 and OPL Models Mfd. prior to July 19, 1999 ................ 6

AD-50 Control Door Assembly

For Models Mfd. as of July 2, 2002 ................................................................................................ 7

AD-50 Control Door Assembly Without Trim

For OPL (Non-Coin) Models Mfd. between November 28, 1998 and July 2, 2002 .........................8

AD-50 High Security Control Door Assembly

For Coin Models Mfd. prior to July 2, 2002 and OPL Models Mfd. prior to November 28, 1998 .....9

Phase 5 Coin Microprocessor Control Panel Assembly....................................................................10

Phase 5 OPL Microprocessor Control Panel Assembly .................................................................... 11

Phase 5 OPL Microprocessor Control Box Assembly ....................................................................... 12

AD-30/AD-50 Coin Vault Assembly .................................................................................................... 13

Dual Timer “Tap Touch” Controls

For Models Mfd. as of November 3, 2000 .................................................................................... 14

Dual Timer Control Panel Assembly

For Models Mfd. prior to November 3, 2000 ................................................................................. 15

Dual Timer Control Box Assembly..................................................................................................... 16

Non-Microprocessor Coin Meter Control Panel Assembly

For Models Mfd. as of February 4, 2002 ...................................................................................... 17

Non-Microprocessor Coin Meter Control Panel Assembly

For Models Mfd. prior to February 4, 2002 ................................................................................... 18

Non-Microprocessor Coin Meter Control Box Assembly ................................................................... 19

Slide Meter Case Assembly

For Models Mfd. as of January 13, 1995 ...................................................................................... 20

Slide Meter Case Assembly

For Models Mfd. prior to January 13, 1995...................................................................................21

Coin Meter Replacement Parts .........................................................................................................22

“Plastic” Main Door Assembly ........................................................................................................... 23

Main Door Switch For “Plastic” Door ................................................................................................. 24

AD-30 Front Panel Assembly For “Plastic” Door...............................................................................25

AD-50 Front Panel Assembly For “Plastic” Door...............................................................................26

AD-30 Cold Rolled Steel (CRS) Door Front Panel ............................................................................27

AD-50 Cold Rolled Steel (CRS) Door Front Panel ............................................................................28

Main Door Switch Assembly Cold Rolled Steel (CRS) Door .............................................................29

Main Door “Steel” Assembly ..............................................................................................................30

AD-30 Basket (Tumbler)/Support Assembly......................................................................................31

AD-50 Basket (Tumbler)/Support Assembly................................................................................ 32, 33

AD-30 Drop Lint Door Assembly

For Models Mfd. as of October 19, 2002 ..................................................................................... 34

AD-30 Drop Lint Door Assembly Without Trim

For OPL (Non-Coin) Models Mfd. between July 19, 1999 and October 19, 2002 ........................ 35

AD-30 Drop Lint Door Assembly

For Coin and OPL Models Mfd. prior to July 19, 1999 .................................................................. 36

AD-50 Drop Lint Door Assembly

For Models Mfd. as of October 7, 2002 ....................................................................................... 37

AD-50 Drop Lint Door Assembly Without Trim

For OPL (Non-Coin) Models Mfd. between November 28, 1999 and October 7, 2002 ................38

AD-50 Drop Lint Door Assembly

For Coin and OPL Models Mfd. prior to November 28, 1998 ....................................................... 39

AD-30 Lint Trap Assembly .................................................................................................................40

AD-50 Lint Trap Assembly .................................................................................................................41

AD-30/AD-50 Basket (Tumbler) Bearing Assembly..................................................................... 42, 43

AD-30 Non-Reversing T.E.F.C. Motor Mount Assembly ............................................................... 44, 45

AD-30 Reversing T.E.F.C. Motor Mount Assembly ...................................................................... 46, 47

Idler Bearing Assembly ................................................................................................................48, 49

AD-50 Non-Reversing T.E.F.C. Motor Mount Assembly ............................................................... 50, 51

AD-50 Reversing T.E.F.C. Motor Mount Assembly ...................................................................... 52, 53

Sensor Bracket Assemblies ........................................................................................................ 54, 55

ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Box Assembly

For Models Mfd. as of April 10, 2000 ...................................................................................... 56, 57

ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly

For Models Mfd. prior to April 10, 2000...................................................................................58, 59

ADE-30/ADE-50 Electric Oven Assembly ................................................................................... 60, 61

ADG-30/ADG-50 Sail Switch/Hi-Limit Assemblies ...................................................................... 62, 63

Single-Phase (1ø) Motor, Electric Relay Panel Assembly ................................................................. 64

3-Phase (3ø) Motor, Electric Relay Panel Assembly ......................................................................... 65

Microprocessor Reversing Rear Control Box Assembly ...................................................................66

Dual Timer Reversing Rear Control Box Assembly .......................................................................... 67

Slide Meter Control Box Assembly

For Models Mfd. as of January 13, 1995 ...................................................................................... 68

Slide Meter Control Box Assembly

For Models Mfd. prior to January 13, 1995...................................................................................69

ADS-30 Steam Coil/Air Operated Steam Damper Assembly ...................................................... 70, 71

ADS-30 Steam Coil/Mechanical Steam Damper Assembly ........................................................ 72, 73

ADS-50 Steam Coil/Air Operated Steam Damper Assembly ...................................................... 74, 75

ADS-50 Steam Coil/Mechanical Steam Damper Assembly Option ............................................. 76, 77

ADG-30/ADG-50 Outer Top/Back Guard Assemblies ........................................................................ 78

AD-30/AD-50 Heat Reclaimer Assembly ........................................................................................... 79

Microprocessor Coin Acceptors Listing ............................................................................................. 80

ADE-30/ADE-50 Step Down Transformer Usage Listing For Electric Dryers ...................................81

AD-30/AD-50 Step Down Transformer Usage Listing For Gas/Steam Dryers ..................................82

ADE-30/ADE-50 Electric Oven Component Application Charts ........................................................83

ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly Specifications .................................. 84

Additional Parts Available................................................................................................................... 85

AD-30 Coin Control and Single Timer Door Assembly

For Models Mfd. as of July 2, 2002

Illus. No. Part No. Qty. Description

1 160015 1 High Security MK-100 Lock Assembly with Key (for coin models Only)

160104 1 MK-100 Key ONLY 2 160016 1 Lock Cam ONLY 3 881053 1 ADC Logo with Tape

870011 1 Double Sided Tape Kit 4 883416 1 White High Security Control Door Assembly with Black Trim

(includes illus. nos. 4 through 7)

883417 1 Stainless Steel High Security Control Door with Black Trim

(includes illus. nos. 4 through 7)

883418 1 Coral Blue High Security Door Assembly with Black Trim

(includes illus. nos. 4 through 7)

883419 1 Ivory High Security Door Assembly with Black Trim

(includes illus. nos. 4 through 7) 5 883525 1 Top Black Trim Strip with Lock Hole 6 117604 6 Neoprene Sponge Tape (sold by the foot) 7 152014 4 1/4-20 Free Spin Wash Nut 8 150317 2 #10-16 x 3/4” TORX + BTN, Type 1 9 102603 1 Control Door Rod Support Catch 10 102601 1 Control Door Rod Retainer Clip 11 102502 1 Control Door Support Rod

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

AD-30 Control Door Assembly Without Trim

For OPL (Non-Coin) Models Mfd. between July 19, 1999 and July 2, 2002

Illus. No. Part No. Qty. Description

1 881053 1 ADC Logo ONLY (with double adhesive tape)

870011 1 Logo Double Tape Kit

2 883097* 1 Control Door

(includes illus. nos. 2 and 3) 3 117604 4 Neoprene Sponge Tape (sold by the foot) 4 150300 4 #10-16 x 1/2” Hex Washer TEK Screw 5 102603 1 Control Door Rod Support Catch 6 102601 1 Control Door Rod Retainer Clip 7 102502 1 Control Door Support Rod 8 882541 2 Spring Turn Latch Assembly

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

AD-30 High Security Control Door Assembly

For Coin Models Mfd. prior to July 2, 2002 and OPL Models Mfd. prior to July 19, 1999

Illus. No. Part No. Qty. Description

1 160015 1 High Security MK-100 Lock Assembly with Key

160104 1 MK-100 Key ONLY 2 160016 1 Lock Cam ONLY 3 881053 1 ADC Logo with Tape

870011 1 Double Sided Tape Kit 4 800023* 1 AD-30 High Security Control Door Assembly Less Lock

(includes illus. nos. 4 through 7)

800140 1 AD-30 Stainless Steel High Security Control Door Assembly Less Lock

(includes illus. nos. 4 through 7) 5 180200 1 AD-30 Top Gray Trim Strip with Lock Hole 6 117603 3 Noise Suppressor Tape (sold by the foot) 7 150201 5 #10-32 x 1/4” Phillips Round Head Machine Screw 8 150300 4 #10-16 x 1/2” Hex Washer TEK Screw 9 102603 1 Control Door Rod Support Catch 10 102601 1 Control Door Rod Retainer Clip 11 102502 1 Control Support Rod

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

AD-50 Control Door Assembly

For Models Mfd. as of July 2, 2002

Illus. No. Part No. Qty. Description

1 160015 1 High Security MK-100 Lock Assembly with Key (for coin models Only)

160104 1 MK-100 Key ONLY 2 160016 1 Lock Cam ONLY 3 881053 1 ADC Logo with Tape

870011 1 Double Sided Tape Kit 4 883477 1 White High Security Control Door Assembly with Black Trim

(includes illus. nos. 4 through 7)

883549 1 Coral Blue High Security Door Assembly with Black Trim

(includes illus. nos. 4 through 7)

883478 1 Ivory High Security Door Assembly with Black Trim

Telephone: (508) 678-9000 Fax: (508) 678-9447

AD-50 Control Door Assembly Without Trim

For OPL (Non-Coin) Models Mfd. between November 28, 1998 and July 2, 2002

Illus. No. Part No. Qty. Description

1 881053 1 ADC Logo ONLY (with double adhesive tape)

870011 1 Logo Double Tape Kit

2 882265* 1 Control Door

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

AD-50 High Security Control Door Assembly

For Coin Models Mfd. prior to July 2, 2002 and OPL Models Mfd. prior to November 28, 1998

Illus. No. Part No. Qty. Description

1 160015 1 High Security MK-100 Lock Assembly with Key (for coin models Only)

160104 1 MK-100 Key ONLY 2 160016 1 Lock Cam ONLY 3 881053 1 ADC Logo with Tape

870011 1 Double Sided Tape Kit 4 800022* 1 AD-50 High Security Control Door Assembly Less Lock

(includes illus. nos. 4 through 7)

800141 1 AD-50 Stainless Steel High Security Control Door Assembly Less Lock

(includes illus. nos. 4 through 7) 5 180201 1 AD-50 Top Gray Trim Strip with Lock Hole 6 117603 3 Noise Suppressor Tape (sold by the foot) 7 150201 5 #10-32 x 1/4” Phillips Round Head Machine Screw 8 150300 4 #10-16 x 1/2” Hex Washer TEK Screw 9 102603 1 Control Door Rod Support Catch 10 102601 1 Control Door Rod Retainer Clip 11 102502 1 Control Door Support Rod

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Phase 5 Coin Microprocessor Control Panel Assembly

Illus. No. Part No. Qty. Description

1 112526 1 Coin Keyboard Label Assembly 2 801213 1 Phase 5 Coin Control Panel Assembly

(includes illus. nos. 1, 2, and 4 through 6)

801229 1 Phase 5 Coin Control Panel Assembly with Battery Option

(includes illus. nos. 1, 2, and 4 through 6) 801259 1 Coin Control Panel ONLY 801258 1 Coin Control Panel ONLY with Battery Bracket

3 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw 4 137213 1 Phase 5 Coin Controller ONLY

824998 1 Phase 5 Battery Clip

5 153010 2 #6 Star Washer 6 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw 7 -------- 1 Microprocessor Coin Acceptor with Optical Switch

(refer to Microprocessor Coin Acceptors Listing on page 80)

8* 137056 1 Optic Switch ONLY 9* 137023 1 Optic Switch Connector ONLY 10* 137021 3 Microprocessor Socket ONLY

880772 1 Single Coin Optical Switch Harness 824080 1 Dual Coin Optical Switch Harness 122800 1 Microprocessor (female) Pin Extraction Tool

11 136048 1 1/8-Amp (Slo-Blo) Fuse

* For dual coin models double the quantity shown.

IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Phase 5 OPL Microprocessor Control Panel Assembly

Illus. No. Part No. Qty. Description

1 112535 1 OPL English Keyboard Label Assembly

112276 1 OPL Stick-On Labels (English Only)...Not Included 112275 1 3-Language OPL Stick-On Labels

(Spanish, Italian, and Hebrew)...Not Included

112277 1 3-Language OPL Stick-On Labels

(English, Spanish, and Hebrew)...Not Illustrated

112278 1 5-Language OPL Stick-On Labels

(Italian, Dutch, French, German, and Chinese)...Not Illustrated

2 801255 1 Phase 5 Microprocessor Control Panel ONLY

801256 1 Phase 5 Microprocessor Control Panel ONLY with Battery Bracket 801206 1 Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly

Complete (includes illus. nos. 1 through 6)

801207 1 Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete

(includes illus. nos. 1 through 6)

3 137222 1 Phase 5 OPL Non-Reversing Controller ONLY

137231 1 Phase 5 OPL Reversing Controller ONLY

824998 1 Phase 5 Battery Clip 4 153010 2 #6 Star Washer 5 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw 6 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw

882541 1 Spring Turn Latch Assembly...Not Illustrated

(for models mfd. prior to March 1, 1994)

7 136048 1 1/8-Amp (Slo-Blo) Fuse

IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).

Telephone: (508) 678-9000 Fax: (508) 678-9447

Phase 5 OPL Microprocessor Control Box Assembly

Illus. No. Part No. Qty. Description

1 -------- 1 Control Voltage Transformer - 24 VAC

(refer to ADE-30/ADE-50 Step Down Transformer Usage Listing For Electric Dryers on page 81) (refer to AD-30/AD-50 Step Down Transformer Usage Listing

For Gas/Steam Dryers on page 82) 2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 3 120715 1 30-Position Terminal Block 4 150002 2 #6-32 x 1” Slotted Round Head Machine Screw 5 151000 2 #6-32 Pal Nut 6 136057 * 1/2-Amp (Slo-Blo) Fuse 7 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw 8 136008 * Fuse Block/Strip ONLY 9 122641 1 15-Pin Microprocessor Connector 10 122706 * Socket Terminal ONLY 11 131931 1 Steam Valve Relay (for mechanical steam damper models Only) - 24 VAC 12 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 13 137035 1 Motor Capacitor (for mechanical steam damper models Only) 14 323583 1 Capacitor Bracket (for mechanical steam damper models Only) 15 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 16 132002 1 Transformer (for mechanical steam damper models - 208 VAC and higher) 17 150300 2 #10-16 x 1/2” Hex Washer TEK Screw

* As required.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

AD-30/AD-50 Coin Vault Assembly

Illus. No. Part No. Qty. Description

1 802112 1 Microprocessor Coin Vault Assembly Complete

(includes illus. nos. 1 through 6) 802117 1 Microprocessor Coin Vault ONLY 802110 1 Non-Microprocessor Coin Vault Assembly Complete

(includes illus. nos. 1 through 6) 802115 1 Non-Microprocessor Coin Vault ONLY

2 160028 1 Cam for 1/4 Turn Lock ONLY 3 875061 1 1/4 Turn Lock with Key and Cam

160105* 1 1/4 Turn Mer-Pel Key ONLY

4 802020 1 1/4 Turn Coin Box Assembly

(includes illus. nos. 2 through 5) 802019 1 1/4 Turn Coin Box ONLY without Faceplate 125915 1 High Security (Greenwald) Coin Box ONLY with Key

5 802018 1 1/4 Turn Coin Box Faceplate ONLY 6 152014 4 1/4-20 Free Spin Wash Nut 7 102502 1 Control Door Support Rod 8 102601 1 Control Door Rod Retainer Clip 9 102603 1 Control Door Rod Catch

* Specify key number when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Dual Timer “Tap Touch” Controls

For Models Mfd. as of November 3, 2000

Illus. No. Part No. Qty. Description

1 124030 1 15 Minute Timer - 24 VAC 2 124025 1 60 Minute Timer - 24 VAC 3 824175 1 Red Pilot Light - 24 VAC 4 122301 1 “Tap Touch” Switch 5 131932 3 Relay SPST 24v 6 120730 1 30-Position Terminal Block 7 151000 6 #6-32 Pal Nut 8 882903 1 Dual Timer Panel Complete

(includes illus. nos. 1 through 15)

850392 - Dual Timer Panel ONLY 9 153010 2 #6 Star Washer 10 152000 3 #6-32 Hex Nut 11 150207 2 #10-24 x 1/2” Phillips Pan Head Machine Screw 12 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw 13 112563 1 Dual Timer Panel Overlay 14 124104 1 Pure Touch Knob with Red Pointer 15 124105 1 Pure Touch Knob with Blue Pointer

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Dual Timer Control Panel Assembly

For Models Mfd. prior to November 3, 2000

Illus. No. Part No. Qty. Description

1 123005 1 Red Indicator Light - 24 VAC 2 122400 1 Rocker Heat Selector Switch 3 824015 1 Dual Timer Control Panel Assembly Complete - 24 VAC

(includes illus. nos. 1 through 21)

800051 1 Dual Timer Control Panel ONLY 4 131917 1 Push-To-Start Relay - 24 VAC 5 150207 2 #10-24 x 1/2” Round Head Machine Screw 6 154001 2 #10-24 Speed Nut 7 152000 2 #6-32 Hex Nut 8 153010 2 #6 Star Washer 9 120730 1 18-Position Terminal Block 10 150002 2 #6-32 x 1” Phillips Round Head Machine Screw 11 150110 4 #8-32 x 1/4” Phillips Machine Screw 12 150001 2 #6-32 x 1/2” Phillips Round Head Machine Screw 13 131931 1 Dual Timer Relay - 24 VAC 14 151000 2 #6-32 Pal Nut 15 112050 1 Dual Timer Label ONLY 16 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw

(for models mfd. as of March 1, 1994)

160005 1 Spring Turn Latch (2-piece)...Not Illustrated

(for models mfd. prior to March 1, 1994) 17 124103 2 Arrow Timer Knob 18 124025 1 60 Minute Timer - 24 VAC 19 124030 1 15 Minute Timer - 24 VAC 20 122602 1 9-Pin Connector ONLY 21 122700 8 Pin Terminal ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated

Telephone: (508) 678-9000 Fax: (508) 678-9447

Dual Timer Control Box Assembly

Illus. No. Part No. Qty. Description

1 122603 1 9-Pin Socket Connector 2 122701 9 Socket Terminal ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated 3 315010 1 9-Pin Connector Bracket 4 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 5 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 6 -------- 1 Transformer

(refer to ADE-30/ADE-50 Step Down Transformer Usage Listing For Electric Dryers on (refer to AD-30/AD-50 Step Down Transformer Usage Listing

For Gas/Steam Dryers on page 82) 7 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 8 131931 1 Steam Valve Relay (for mechanical steam damper models Only) - 24 VAC 9 136008 * Fuse Block/Strip ONLY 10** 136057 * 1/2-Amp (Slo-Blo) Fuse 11 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw 12 150002 2 #6-32 x 1” Slotted Round Head Machine Screw 13 120715 1 30-Position Terminal Block 14 151000 2 #6-32 Pal Nut 15 132002 1 Transformer (for mechanical steam damper - 208 VAC and higher) 16 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 17 137035 1 Motor Capacitor (for mechanical steam damper models Only) 18 323583 1 Capacitor Bracket (for mechanical steam damper models Only) 19 150300 2 #10-16 x 1/2” Hex Washer TEK Screw

page 81)

* As required. ** Check fuse rating for verification.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Non-Microprocessor Coin Meter Control Panel Assembly

For Models Mfd. as of February 4, 2002

Illus. No. Part No. Qty. Description

1 123005 1 Red Indicator Light - 24 VAC 2 122400 1 Rocker Heat Selector Switch 3 824172 1 Coin Meter Control Panel Assembly Less Coin Meter

(includes illus. nos. 1 through 5, 7, and 8)

824109 1 Coin Meter Control Panel ONLY

4 131932 1 24 VAC Relay

154001 2 #10-24 Speed Nut (used on P/N 131932, 24 VAC Relay) 5 123225 1 Green Push-To-Start Button 6 125601 1 25¢ Coin Meter - 24 VAC (specify timing) 7 153010 2 #6 Star Washer 8 152016 2 Hex Nut 9 120712 1 12-Position Terminal Block 10 150415 1 #10-16 x /12” Phillips Round Head Crimptite Screw 11 122602 1 9-Pin Connector 12 122700 7 Pin Terminal ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated

NOTE: For Coin Meter Replacement Parts refer to page 22.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Non-Microprocessor Coin Meter Control Panel Assembly

For Models Mfd. prior to February 4, 2002

Illus. No. Part No. Qty. Description

1 123005 1 Red Indicator Light - 24 VAC 2 122400 1 Rocker Heat Selector Switch 3 824020 1 Coin Meter Control Panel Assembly Complete - 24 VAC

(includes illus. nos. 1 through 6 and 8 through 12)

800054 1 Coin Meter Control Panel ONLY 4 131917 1 Push-To-Start Relay - 24 VAC 5 150207 2 #10-24 x 1/2” Round Head Machine Screw 6 154001 2 #10-24 Speed Nut 7* 125601 1 25¢ Coin Meter - 24 VAC (specify timing) 8 150303 2 #4 x 3/4” Pan Head “A” Screw 9 120712 1 12-Position Terminal Block 10 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw

(for models mfd. as of March 3, 1994)

160005 1 Spring Turn Latch (2-piece)...Not Illustrated

(for models mfd. as of March 3, 1994) 11 122602 1 9-Pin Connector ONLY 12 122700 9 Pin Terminal ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated

* Consult factory for coin meters not listed.

NOTE: For Coin Meter Replacement Parts refer to page 22.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Non-Microprocessor Coin Meter Control Box Assembly

Illus. No. Part No. Qty. Description

1 122603 1 9-Pin Socket Connector 2 122701 9 Socket Terminal ONLY

(refer to ADE-30/ADE-50 Step Down Transformer Usage Listing For Electric Dryers on page 81) (refer to AD-30/AD-50 Step Down Transformer Usage Listing

For Gas/Steam Dryers on page 82) 7 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 8 131931 1 Steam Valve Relay (for mechanical steam damper models Only) - 24 VAC 9 136008 * Fuse Block/Strip ONLY 10** 136057 * 1/2-Amp (Slo-Blo) Fuse 11 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw 12 150002 2 #6-32 x 1” Slotted Round Head Machine Screw 13 120715 1 30-Position Terminal Block 14 151000 2 #6-32 Pal Nut 15 132002 1 Transformer (for mechanical steam damper 208 VAC and higher) 16 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 17 137035 1 Motor Capacitor (for mechanical steam damper models Only) 18 323583 1 Capacitor Bracket (for mechanical steam damper models Only) 19 150300 2 #10-16 x 1/2” Hex Washer TEK Screw

* As required. ** Check fusing on dryer for verification.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Slide Meter Case Assembly

For Models Mfd. as of January 13, 1995

Illus. No. Part No. Qty. Description

1* 160199 1 Key ONLY for Slide Meter Lock 2 160099 1 Lock/Key/Cam and Hardware

883037 1 White Slide Meter Timer Door 3 125908 1 Slide Meter Accumulator - 24 VAC 4 122643 9 Mate-N-Lock Pin ONLY 5 122642 1 9-Position Mini-Universal Socket 6 152014 4 1/4-20 Free Spin Wash Nut 7 122631 2 6-Position Connector (mate-n-lock) 8 131917 1 Push-To-Start Relay - 24 VAC 9 881100 1 Slide Meter Modular J-Box Assembly 10 122603 1 9-Position Connector (mate-n-lock) 11 122701 21 Socket Terminal ONLY 12 125900 1 Slide Meter Case ONLY with Door Less Lock 13 154203 6 1/4” Drive Rivet 14 801700 1 Slide Meter Extension ONLY with Mirror

(includes illus. nos. 14 and 15) 15 315404 1 Stainless Steel Mirror ONLY 16 -------- 1 Typical Slide Meter Coin Chute (Not available from ADC) 17 123005 1 Red Indicator Light - 24 VAC 18 122400 1 Rocker Heat Selector Switch 19 -------- 1 Typical Slide Meter Coin Box (Not available from ADC) 20 801701 1 Slide Meter Case Mounting Plate 21 102502 1 Control Door Support Rod 22 102601 1 Control Door Rod Retainer Clip 23 102600 1 Control Door Support Rod Catch 24 125903 1 Slide Meter Extension

* Specify key number when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Slide Meter Case Assembly

For Models Mfd. prior to January 13, 1995

Illus. No. Part No. Qty. Description

1* 160199 1 Key ONLY for Slide Meter Lock 2 160099 1 Lock/Key/Cam and Hardware 3 125908 1 Slide Meter Accumulator - 24 VAC 4 152014 4 1/4-20 Free Spin Wash Nut 5 125900 1 Slide Meter Case ONLY with Door Less Lock 6 154203 6 1/4” Drive Rivet 7 801700 1 Slide Meter Extension ONLY with Mirror

(includes illus. nos. 7 and 8) 8 315404 1 Stainless Steel Mirror ONLY 9 -------- 1 Typical Slide Meter Coin Chute (Not available from ADC) 10 -------- 1 Typical Slide Meter Coin Box (Not available from ADC) 11 801701 1 Slide Meter Case Mounting Plate 12 102502 1 Control Door Support Rod 13 102601 1 Control Door Rod Retainer Clip 14 102600 1 Control Door Support Rod Catch 15 122400 1 Rocker Heat Selector Switch 16 123005 1 Red Indicator Light - 24 VAC 17 131917 1 Push-To-Start Relay - 24 VAC

* Specify key number when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Coin Meter Replacement Parts

Illus. No. Part No. Qty. Description

1 125541 1 1/60 RPM - 60 Hz Meter Motor - 24 VAC

125540 1 1/30 RPM - 50 Hz Meter Motor - 24 VAC

2 125500 1 2-Point Cam

125501 1 3-Point Cam 125502 1 4-Point Cam 125503 1 5-Point Cam 125504 1 6-Point Cam 125506 1 8-Point Cam 125507 1 9-Point Cam 125508 1 10-Point Cam

125510 1 12-Point Cam 3 125515 1 Meter Switch “B” with Arm 4 125516 2 Meter Switch “A” or “C”

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

“Plastic” Main Door Assembly

Illus. No. Part No. Qty. Description

1 881421 1 Gray Plastic Main Door Assembly Complete with Mechanical Fasteners

(includes illus. nos. 1 and 5 through 9)

881422 1 Black Plastic Main Door Assembly Complete with Mechanical Fasteners

(includes illus. nos. 1 and 5 through 9) 2 800448 1 12-1/2” Stainless Steel Main Door Hinge Assembly 3 150410 4 #10-24 x 3/8” Phillips Pan Head Taptite Screw 4 152014 4 1/4-20 Free Spin Wash Nut 5 102349 1 Main Door Gasket 6 102212* 1 20-7/16” Door Glass with Four (4) Holes

102210 1 20-7/16” Door Glass...Not Illustrated

(for models mfd. prior to August 23, 1996)

170730 1 Main Door Gasket/Glass Adhesive (10.3 oz. cartridge) 7 170319* 4 1/2” Stainless Steel Flat Head Allen Screw 8 150448* 4 Door Glass (nylon) Spacer 9 150431 1 Main Door Latch Screw

(#10 x 7/16” dome hex head screw)

* For use on models mfd. with gray/black plastic main door assembly with mechanical fasteners ONLY.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Main Door Switch For “Plastic” Door

Illus. No. Part No. Qty. Description

1 152013 2 #6-32 Hex Nut 2 153008 2 #6 Lock Washer 3 137005 1 Single-Pole Door Switch (SDS) 4 121028 2 Insulated Female Terminal 5 154281 2 3/8” Standard Nylon Spacer 6 800448 1 12-1/2” Stainless Steel Main Door Hinge Assembly

(includes illus. nos. 6 and 7) 7 153565 2 #6 Stud 8 313218 1 Main Door Switch Housing 9 150201 2 #10-32 x 1/4” Phillips Pan Head Screw 10 121405 1 Rubber Grommet

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

AD-30 Front Panel Assembly For “Plastic” Door

Illus. No. Part No. Qty. Description

1 875300* 1 AD-30 Right Hand Insulated Front Panel Assembly Complete (latch-type)

(includes illus. nos. 1, 2, 3, and 6)

875311 1 AD-30 Stainless Steel Right Hand Insulated Front Panel Assembly Complete

(latch-type)

(includes illus. nos. 1, 2, 3, and 6) 2 154215 2 1/8” Pop Rivet 3 170330 1 Friction Door Latch 4 150300 1 #10-16 x 1/2” Hex Washer TEK Screw 5 150309 8 #10-16 x 1/2” Hex Head TEK Crimptite Screw

150313 8 TORX Head Screw

(for models mfd. as of October 2, 2000) 6 121405 1 Rubber Grommet

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

+ 61 hidden pages

American Dryer AD-50 Parts Diagram

Specifications and Main Features

Frequently Asked Questions

User Manual