American Dryer AD-4545 Parts Diagram

AD-4545

Parts Manual

Phase 7

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: [phone] / Fax: [phone]

E-mail: [e-mail]

www.amdry.com

ADC Part No. 450329-4

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included
with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right
to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and
to change or discontinue models.

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.

POUR VOTRE SÉCURITÉ

Important

For your convenience, log the following information:

DATE OF PURCHASE ___________________________________________________ MODEL NO. ______________

RESELLER’S NAME _________________________________________________________________________________

Serial Number(s) ____________________________________________________________________________________

AD-4545

____________________________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from
the factory, you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts
Department at [phone]. Please specify the dryer model number and serial number in addition to the description
and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.

Table of Contents

Coin Microprocessor Control Panel Assembly ..........................................................................................................4

Top and Bottom Front Panels and Door Assembly ...................................................................................................5

Coin Box Assembly, Vault and Coin Chute................................................................................................................6

Tumbler and Basket Support and Hi-Limit Assembly ................................................................................................7

Microprocessor Temperature Sensor Bracket Assembly...........................................................................................8

Locking Lint Drawer Assembly................................................................................................................................... 9

Tumbler Bearing Support Assembly ........................................................................................................................10

Drive and Idler Belts / Pulleys .................................................................................................................................11

Totally Enclosed, Fan-Cooled Motor Mount Assembly ............................................................................................12

Sail Switch Assembly...............................................................................................................................................13

Natural Gas Burner Assembly .................................................................................................................................14

Single-Phase (1Ø) Top Motor Electrical Relay Panel Assembly .............................................................................15

Single-Phase (1Ø) Bottom Motor Electrical Relay Panel Assembly .......................................................................16

3-Phase (3Ø) Top Motor, Electrical Relay Panel Assembly ....................................................................................17

3-Phase (3Ø) Bottom Motor, Electrical Relay Panel Assembly ..............................................................................18

Exhaust, Back Guard, and Burner Assembly ..........................................................................................................19

Coin Microprocessor Control Panel Assembly

Illus. No. Part No. Qty. Description

1 153073 8 #8-32 Keps Nut
2 112575 1 Phase 7.3 Coin Keypad
3 137270 1 Large Character Display
4 137253 1 Phase 7.3.2 Coin Board
5 137250 1 Phase 7 Coin Ribbon Cable
6 153010 8 #6 Internal Star Washer
7 150005 8 #6-32 x 1/4” Phillips Screw
8 845760 1 Computer Board Mount
9 852317 1 .25 US Hanke Coin Acceptor Assembly
10 152102 8 M3 Metric Nut
11 845762 1 Cold Rolled Steel Control Panel (white)

845813 1 Stainless Steel Control Panel
12 883774 1 Hanke Phase 7 Optic Switch Assembly
13 150005 4 #6-32 x 1/4” Phillips Screw
14 153010 4 #6 Internal Star Washer

4 American Dryer Corporation 450329 -4

Top and Bottom Front Panels and Door Assembly

Illus. No. Part No. Qty. Description

1 845797 1 Top Cold Rolled Steel Front Panel (white)

845819 1 Stainless Steel Top Front Panel

2 845794 1 Bottom Cold Rolled Steel Coin Front Panel (white)

845809 1 Bottom Cold Rolled Steel Non-Coin Front Panel (white)
845816 1 Bottom Stainless Steel Coin Front Panel

845841 1 Bottom Stainless Steel Non-Coin Front Panel
3 102004 2 Door Magnet
4 152223 2 #10-32 x 1/2” T-20 TORX

®

Machine Screw
5 153031 1 Nylon Washer
6 800293 1 Top Hinge Block Assembly (black)
7 800292 1 Bottom Hinge Block Assembly (black)
8 150313 16 #10-16 x 1/2” TORX PLUS

®

9 185512 1 31-1/4” Main Door Gasket
10 822630 1 31-1/4” Main Door Assembly
11 110006 1 1/2” Black Strapping Tape
12 345479 1 Bottom Front Trim Piece (black)
13 150319 3 #10-32 x 1/2” TORX PLUS

®

Screw (black)

14 801789 1 Left-Hand Main Door Switch Assembly 37-1/4” Door

(includes illus. nos. 14 through 19)
15 150006 2 #6-32 x 7/8” Phillips Screw
16 137005 1 Main Door Switch
17 153010 2 #6 Internal Star Washer
18 152013 2 #6-32 Hex Nut
19 150201 2 #10-32 x 1/4” Phillips Screw
20 345023 1 Front Panel Middle Trim (black)
21 150319 4 #10-32 x 1/2” TORX PLUS

®

Screw (black)

450329 -4 www.amdry.com 5

Coin Box Assembly, Vault and Coin Chute

Illus. No. Part No. Qty. Description

1 845789 1 Coin Box Assembly (black)

160058 1 Coin Box Lock ONLY

182622 1 Key ONLY (specify key number when ordering)
2 845792 1 Coin Vault
3 845791 1 Coin Chute Assembly
4 –––––– – Refer to
5 152014 4 1/4-20 Free Spin Nut

6 American Dryer Corporation 450329 -4

page 5