American Dryer AD-26 Parts Diagram

AD-26 Parts Manual

24 VAC Phase 5

1992 thru 2001

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

T elephone: [phone] / Fax: [phone]

E-mail: techsupport@amdry .com

www .amdry .com

ADC Part No. 450559

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is

properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.

W e have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME _______________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

AD-26

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory ,
you can F AX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORT ANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.

Table of Contents

Coin Control Door Assembly

For Models Mfd. as of March 21, 1997...............................................................................3

Non-Coin Control Door Assembly

For Models Mfd. as of March 21, 1997...............................................................................4

Dual T imer Control Door Assembly

For Models Mfd. as of March 21, 1997...............................................................................5

Coin Control Door Assembly

For Models Mfd. prior to March 21, 1997 ..........................................................................6

Non-Coin Control Door Assembly

For Models Mfd. prior to March 21, 1997 ..........................................................................7

Dual T imer Control Door Assembly

For Models Mfd. prior to March 21, 1997 ..........................................................................8

Single Coin Microprocessor Control Panel Assembly

For Models Mfd. as of April 1 1, 1996 .................................................................................9

Single Coin Microprocessor Control Panel Assembly

For Single Coin 25¢ Models Only Mfd. prior to April 1 1, 1996 ........................................10

Dual Coin Microprocessor Control Panel Assembly

For Models Mfd. prior to April 11, 1996 ........................................................................... 11

Non-Coin Microprocessor Control Panel Assembly

For Models Mfd. prior to April 11, 1996 ...........................................................................12

Microprocessor Control Box Assembly..................................................................................13

25¢ Coin Acceptor Component Listing

For Models Mfd. prior to April 11, 1996 .....................................................................14, 15

Dual Coin Acceptor Component Listing

For Export Models Only Mfd. prior to April 1 1, 1996.................................................16, 17

Dual Timer “T ap T ouch” Controls

For Models Mfd. as of November 3, 2000.........................................................................18

Dual Timer Control Panel Assembly........................................................................................19

Non-Microprocessor Coin Control Panel Assembly...............................................................20

Non-Microprocessor Control Box Assembly..........................................................................21

Main Door “Steel” Assembly............................................................................................. 22, 23

Plastic Main Door Assembly ...................................................................................................24

Cold Rolled Steel Door Front Panel........................................................................................25

Main Door Switch Assembly (Cold Rolled Steel Door) ..........................................................26

Coin Front Panel Assembly

For Models with a Plastic Door .........................................................................................27

Non-Coin Front Panel Assembly

For Models with a Plastic Door .........................................................................................28

Main Door Switch Assembly

For Models with a Plastic Door .........................................................................................29

Lint Door Assembly ................................................................................................................30

Lint Basket/Lint Switch Assemblies ........................................................................................31

Coin V ault Assembly................................................................................................................32

Tumbler/Support Assemblies...................................................................................................33

Tumbler Brush Assembly.........................................................................................................34

Microprocessor T emperature Sensor Bracket Assembly .........................................................35

Non-Microprocessor T emperature Sensor Bracket Assembly .................................................36

Sail Switch Assembly ..............................................................................................................37

Tumbler Bearing Assembly ................................................................................................38, 39

T otally Enclosed, Non-V ent Motor/Idler Assemblies ........................................................40, 41

Upshot Burner Assembly

For Models Mfd. as of May 20, 2000 ..........................................................................42, 43

Upshot Burner Assembly

For Models Mfd. prior to May 20, 2000......................................................................44, 45

Back Guard Outer T op Assemblies ..........................................................................................46

12-Rib 120” (J) Poly Belt Arrangement ..................................................................................47

Upshot Burner Assembly Specifications .................................................................................48

Additional Parts Available........................................................................................................49

Coin Control Door Assembly

For Models Mfd. as of March 21, 1997

Illus. No. Part No. Qty. Description

1 881585* 1 Coin Control Door with T rim Less Locks

(includes illus. nos. 1, 5, and 6)

881583 1 Stainless Steel Coin Control Door with Trim Less Locks

(includes illus. nos. 1, 5, and 6)

2 112301 1 ADC Logo Only (small)

870011 1 Logo Double Stick Tape Kit
3 160040 2 ACE® Lock Assembly Only
4 160140 - ACE® Key Only (key number XX4451)
5 180315 1 Lower Control Door Trim
6 150310 5 #8 x 1/2” Phillips Pan Head “A” Screw
7 150300 4 #10-16 x 1/2” Hex Washer TEK Screw

* Specify color when ordering.

450559-2 Telephone: [phone] / www.amdry.com 3

Non-Coin Control Door Assembly

For Models Mfd. as of March 21, 1997

Illus. No. Part No. Qty. Description

1 881586* 1 Non-Coin Control Door with Trim Less Locks

(includes illus. nos. 1, 5, and 6)

2 112301 1 ADC Logo Only (small)

870011 1 Logo Double Stick Tape Kit
3 160040 2 ACE® Lock Assembly Only
4 160140 - ACE® Key Only (key number XX4451)
5 180315 1 Lower Control Door Trim
6 150310 5 #8 x 1/2” Phillips Pan Head “A” Screw
7 150300 4 #10-16 x 1/2” Hex Washer TEK Screw

* Specify color when ordering.

4 American Dryer Corporation 450559-2

Dual T imer Contr ol Door Assembly

For Models Mfd. as of March 21, 1997

Illus. No. Part No. Qty. Description

1 881596* 1 Coin Control Door with T rim Less Locks

(includes illus. nos. 1, 5, and 6)

2 112301 1 ADC Logo Only (small)

870011 1 Logo Double Stick Tape Kit
3 160040 2 ACE® Lock Assembly Only
4 160140 - ACE® Key Only (key number XX4451)
5 180315 1 Lower Control Door Trim
6 150310 5 #8 x 1/2” Phillips Pan Head “A” Screw
7 150300 4 #10-16 x 1/2” Hex Washer TEK Screw

* Specify color when ordering.

450559-2 Telephone: [phone] / www.amdry.com 5

Coin Control Door Assembly

For Models Mfd. prior to March 21, 1997

Illus. No. Part No. Qty. Description

1 880236* 1 Coin Control Door with T rim Less Locks

(includes illus. nos. 1, 5, and 6)

850414* 1 Coin Control Door Only

2 112301 1 ADC Logo Only (small)

870011 1 Logo Double Stick Tape Kit
3 160040 1 ACE® Lock Assembly Only
4 160140 - ACE® Key Only (key number XX4451)
5 180315 1 Lower Control Door Trim
6 150310 5 #8 x 1/2” Phillips Pan Head “A” Screw

* Specify color when ordering.

6 American Dryer Corporation 450559-2

Non-Coin Control Door Assembly

For Models Mfd. prior to March 21, 1997

Illus. No. Part No. Qty. Description

1 880918* 1 Non-Coin Control Door with Trim Less Locks

(includes illus. nos. 1, 5, and 6)

880917* 1 Non-Coin Control Door Only

2 112301 1 ADC Logo Only (small)

870011 1 Logo Double Stick Tape Kit
3 160040 1 ACE® Lock Assembly Only
4 160140 - ACE® Key Only (key number XX4451)
5 180315 1 Lower Control Door Trim
6 150310 5 #8 x 1/2” Phillips Pan Head “A” Screw

* Specify color when ordering.

450559-2 Telephone: [phone] / www.amdry.com 7

Dual T imer Contr ol Door Assembly

For Models Mfd. prior to March 21, 1997

Illus. No. Part No. Qty. Description

1 880773* 1 Coin Control Door with T rim Less Locks

(includes illus. nos. 1, 5, and 6)

850415* 1 Coin Control Door Only

2 112301 1 ADC Logo Only (small)

870011 1 Logo Double Stick Tape Kit
3 160040 1 ACE® Lock Assembly Only
4 160140 - ACE® Key Only (key number XX4451)
5 180315 1 Lower Control Door Trim
6 150310 5 #8 x 1/2” Phillips Pan Head “A” Screw

* Specify color when ordering.

8 American Dryer Corporation 450559-2

Single Coin Microprocessor Contr ol Panel Assembly

For Models Mfd. as of April 11, 1996

Illus. No. Part No. Qty. Description

1 112568 1 Single Coin Keyboard for Hanke Acceptor
2 881163 1 25¢ Hanke Coin Acceptor with Optic

881450 1 25¢ Canadian Coin Acceptor with Optic

881451 1 0.880 T oken Hanke Coin Acceptor with Optic
3 150150 1 2.5 mm x 10 mm Stainless Steel Phillips Screw
4 881143 1 Hanke Optic Switch
5 150309 1 #10-16 x 1/2” Hex Head Tek Crimptite
6 883353 1 Control Panel Assembly Complete Less Acceptor

(includes illus. nos. 1 and 5 through 10)

883352 1 Control Panel Only
7 137216 1 Phase 5 Coin Board
8 152102 4 M-3 Metric Hex Nut
9 153010 2 #6 Star Washer
10 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw

450559-2 Telephone: [phone] / www.amdry.com 9

Single Coin Microprocessor Contr ol Panel Assembly

For Single Coin 25¢ Models Only Mfd. prior to April 1 1, 1996

Illus. No. Part No. Qty. Description

1 112560 1 Single Coin Keyboard Label Only
2 880887 1 Single Coin Panel Control Less Acceptor - 24 VAC

(includes illus. nos. 1 through 5)

880888 1 Control Panel Only

3 137216 1 Phase 5 Microprocessor Controller Only

824998 1 Phase 5 Battery Clip Only
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
6 -------- 1 25¢ Coin Acceptor Only

(refer to 25¢ Coin Acceptor Component Listing on page 14 and
page 15)

7 137056 1 Optical Switch Only
8 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite

NOTE: Contact factory for export models.

10 American Dryer Corporation 450559-2

Dual Coin Microprocessor Contr ol Panel Assembly

For Models Mfd. prior to April 1 1, 1996

Illus. No. Part No. Qty. Description

1 112560 1 Dual Coin Keyboard Label Only
2 880906 1 Dual Coin Panel Control Less Acceptor - 24 VAC

(includes illus. nos. 1 through 5)

880904 1 Dual Coin Control Panel Only

3 137216 1 Phase 5 Control Microprocessor Only

824998 1 Phase 5 Battery Clip Only
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
6 -------- 1 Dual Coin Acceptor Only

(refer to Dual Coin Acceptor Component Listing on pages 16 and
page 17)

7 137056 2 Optical Switch Only
8 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite

NOTE: Contact factory for export models.

450559-2 Telephone: [phone] / www.amdry.com 11

Non-Coin Micropr ocessor Contr ol Panel Assembly

For Models Mfd. prior to April 1 1, 1996

Illus. No. Part No. Qty. Description

1 112560 1 Dual Coin T win-Keyboard Label Only
2 880905 1 Non-Coin Control Panel Assembly Complete - 24 VAC

(includes illus. nos. 1 through 5)

880916 1 Non-Coin Control Panel Only

3 137216 1 Phase 5 Non-Coin Computer Board Only

824998 1 Phase 5 Battery Clip Only
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
6 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite

12 American Dryer Corporation 450559-2

Micropr ocessor Contr ol Box Assembly

Illus. No. Part No. Qty. Description

1 150103 2 #8-32 x 3/4” Phillips Round Head Machine Screw
2 141403 1 24 VAC Transformer Only
3 151001 2 #8-32 Pal Nut
4 151000 * #6-32 Pal Nut
5 136008 * 3-Position Fuse Block
6 150002 * #6-32 x 1” Phillips Round Head Machine Screw
7** 136057 * 1/2-Amp (Slo-Blo) Fuse Only
8 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
9 120715 1 30-Position Terminal Block
10 151000 2 #6-32 Pal Nut
11 122626 1 15-Pin Socket Connector Only
12 122705 11 Socket T erminal Only
13 122704 11 Pin T erminal Only
14 122625 1 15-Pin Socket Connector Only

137025 1 6-15 Position Strain Relief...Not Illustrated
15 122631 1 6-Pin Socket Connector Only
16 122705 3 Socket Terminal Only
17 122704 3 Pin Terminal Only
18 122630 1 6-Pin Connector Only

137025 1 6-15 Position Strain Relief...Not Illustrated
19 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite
20 121010 1 L-70 Ground Lug
21 132475 1 Double Pole 24v Contactor
22 824828 1 RC Network with Connectors
23 150103 4 #8-32 x 3/4” Phillips Round Head Machine Screw
24 151001 4 #8-32 Pal Nut

* For 115 VAC application quantity is 1 and for 208/230 VAC application quantity is 2.
** Check fuse rating for verification.

450559-2 Telephone: [phone] / www.amdry.com 13

25¢ Coin Acceptor Component Listing

For Models Mfd. prior to April 1 1, 1996

14 American Dryer Corporation 450559-2