American Dryer AD-15 Parts Diagram

AD-15 Parts Manual

24 VAC Phase 7

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

T elephone: [phone] / Fax: [phone]

E-mail: [e-mail]

www .amdry .com

ADC Part No. 450436

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is

properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.

W e have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME _______________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

AD-15

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory ,
you can F AX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORT ANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.

Table of Contents

Coin Control Door Assembly.................................................................................................................. 4

Phase 7 Coin Microprocessor Control Panel Assembly ........................................................................... 5

Phase 7 Coin Microprocessor Control Box Assembly ............................................................................. 6

Microprocessor Coin V ault Assembly..................................................................................................... 7

Phase 7 Non-Coin Microprocessor Control Panel Assembly ................................................................... 8

Front Panel Assembly ............................................................................................................................. 9

Main Door “Steel” Assembly ................................................................................................................ 10

Main Door Switch Assembly ................................................................................................................. 11

Tumbler Support Assembly ................................................................................................................... 12

Tumbler Bearing Assembly .................................................................................................................... 13

Non-Coin Drop Lint Door Assembly .................................................................................................... 14

Coin Drop Lint Door Assembly............................................................................................................. 15

Lint Trap Assembly ............................................................................................................................... 16

Idler Bearing Assembly ......................................................................................................................... 17

Non-Reversing Motor Mount Assembly .......................................................................................... 18, 19

Sensor Bracket Assemblies............................................................................................................. 20, 21

Direct Spark Ignition Burner Assembly............................................................................................ 22, 23

Electric Oven Assembly .................................................................................................................. 24, 25

Direct Spark Ignition Control Module Assembly .................................................................................... 26

Single-Phase (1ø) Motor, Electric Relay Panel Assembly ....................................................................... 27

3-Phase (3ø) Motor, Electric Relay Panel Assembly .............................................................................. 28

Slide Meter Control Box Assembly ....................................................................................................... 29

Steam Coil/Air-Operated Steam Damper Assembly ........................................................................ 30, 31

Steam Coil/Mechanical Steam Damper Assembly ............................................................................ 32, 33

Outer T op/Back Guard Assembly ......................................................................................................... 34

Coin Meter Replacement Parts ............................................................................................................. 35

Transformer Usage Listing for Gas/Steam Dryers................................................................................... 36

Transformer Usage Listing for Electric Dryers........................................................................................ 37

Electric Oven Component Application Chart ......................................................................................... 38

Additional Parts Available ..................................................................................................................... 39

Coin Control Door Assembly

Illus. No. Part No. Qty. Description

1 883589 1 White Control Door without Locks

(includes illus. nos. 1 through 3 and 6)

883590 1 Coral Blue Control Door without Locks

(includes illus. nos. 1 through 3 and 6)

883591 1 Ivory Control Door without Locks

(includes illus. nos. 1 through 3 and 6)
2 117604 5 1/8” x 3/8” Neoprene Sponge Tape (sold by the foot)
3 883588 1 Black Control Door T rim
4 160040 2 XX4451 Lock Only
5 160140 * XX4451 Key Only
6 152014 3 1/4-20 Free Spin Wash Nut

* As required.

4 American Dryer Corporation 450436-1

Phase 7 Coin Micropr ocessor Contr ol Panel Assembly

Illus. No. Part No. Qty. Description

1 137250 1 Phase 7 Coin Ribbon Cable
2 137270 1 16” x 1” Large Character Display
3 883435 1 Phase 7 Coin Board
4 112575 1 Phase 7 Keyboard
5 153010 4 #6 Internal and External Star Washers
6 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
7 152102 4 M3 Metric Hex Nut
8 802536 1 Phase 7 Coin Control Panel Only

802537 1 Phase 7 Coin Control Panel Assembly

(includes illus. nos. 1 through 8)
9 803612 1 Phase 7 25¢ Coin Acceptor Assembly
10 122633 1 3-Pin Connector

450436-1 Telephone: [phone] / www.amdry.com 5

Phase 7 Coin Micropr ocessor Contr ol Box Assembly

Illus. No. Part No. Qty. Description

1 122681 1 10-Pin Connector
2 122676 1 8-Pin Connector
3 122646 1 2-Pin Connector
4 122640 1 9-Pin Connector
5 122669 * Female Crimp T erminal
6 122706 * #20-16 U.M.N.L. Socket

* As needed.

6 American Dryer Corporation 450436-1

Micropr ocessor Coin Vault Assembly

Illus. No. Part No. Qty. Description

1 883596 1 Security Coin V ault Assembly Complete

(includes illus. nos. 1 through 3)

802535 1 High Security Coin Vault Only

2 160022 1 High Security Screw Lock with Key

160113* 1 Key Only For High Security Screw Lock
3 802534 1 High Security Coin Box Only
4 153050 4 1/2” S.A.E. Flat Washer
5 152014 4 1/4-20 Free Spin Wash Nut
6 102502 1 Control Door Support Rod
7 102601 1 Control Door Rod Retainer Clip
8 102603 1 Control Door Support Rod Catch

* Specify key number when ordering.

450436-1 Telephone: [phone] / www.amdry.com 7

Phase 7 Non-Coin Microprocessor Control Panel Assembly

Illus. No. Part No. Qty. Description

1 112571 1 Phase 7 Non-Coin Keyboard
2 850984 1 Phase 7 Microprocessor Controller (computer) Panel Only

883301 1 Phase 7 Non-Coin Reversing Microprocessor Controller (computer)

ControlPanel Assembly Complete

(includes illus. nos. 1 through 7)
3 883277 1 Phase 7 Non-Coin Microprocessor Controller (computer) Only
4 150005 2 #6-32 x 3/4” Phillips Round Head Machine Screw
5 153010 2 #6 S tar Washer
6 136016 1 5-amp Fuse
7 136097 1 500 mA Fuse

8 American Dryer Corporation 450436-1

Front Panel Assembly

Illus. No. Part No. Qty. Description

1 883553 1 White Front Panel Assembly

(includes illus. nos. 1 through 3)

881287 1 Stainless Steel Front Panel Assembly

(includes illus. nos. 1 through 3)

883554 1 Ivory Front Panel Assembly

(includes illus. nos. 1 through 3)

883555 1 Coral Blue Front Panel Assembly

(includes illus. nos. 1 through 3)
2 154215 2 5/32” x 1/4” Rivet
3 881987 1 Friction Door Latch Kit

(includes illus. nos. 2 and 3)
4 150300 1 #10-16 x 1/2” Hex Washer TEK Screw
5 150309 8 #10-16 x 1/2” Phillips Hex Head TEK Crimptite Screw
6 8 8 1 1 5 2 1 Black Top Hinge Block Assembly

881208 1 Stainless Steel T op Hinge Block Assembly

7 150445 4 1/4-20 x 7/8” Black Cap Head Setscrew

150443 4 1/4-20 x 7/8” Stainless Steel Cap Head Setscrew

8 8 81151 1 Black Bottom Hinge Block Assembly

881209 1 Stainless Steel Bottom Hinge Assembly

450436-1 Telephone: [phone] / www.amdry.com 9

Main Door “Steel” Assembly

Illus. No. Part No. Qty. Description

1 8 8 1 150 1 Black Main Door Assembly Complete

(includes illus. nos. 1, 2, and 8 through 15)

2 102354 1 Door Gasket

170731 1 Black Gasket Adhesive (10.3 oz. cartridge)

3 8 8 1 1 5 2 1 Black Top Hinge Block Assembly

(includes illus. nos. 3 and 4)
4 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
5 153031 1 1/4” Nylon Washer
6 8 81151 1 Black Bottom Hinge Block Assembly

(includes illus. nos. 5, 6, and 7)
7 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
8 150683 3 1/4-20 x 5/8” Black Carriage Bolt
9 152014 3 1/4-20 Free Spin Wash Nut
10 151010 1 #10-32 Black Hex Acorn Nut
1 1 150120 1 Door Latch Screw
12 150683 3 1/4-20 x 5/8” Black Carriage Bolt
13 152014 3 1/4-20 Free Spin Wash Nut
14 881210 1 Black Main Door Handle Only
15 102211 1 20-7/16” Door Glass

170731 1 Black Glass Adhesive (10.3 oz. cartridge)

10 American Dryer Corporation 450436-1

Main Door Switch Assembly

Illus. No. Part No. Qty. Description

1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 #6 S tar Washer
4 137005 1 Door Switch Only
5 122636 2 Flag T erminal
6 881211 1 Black Main Door Switch Housing Only

88 1 1 5 3 1 Black Main Door Switch Housing Complete

(includes illus. nos. 1 through 4 and 6)

7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

450436-1 Telephone: [phone] / www.amdry.com 11

T umbler Support Assembly

Illus. No. Part No. Qty. Description

1* 800700 1 Galvanized Tumbler Only (without felt collar)

800850 1 Stainless Steel Tumbler Only (without felt collar)
800812 1 Galvanized Tumbler and Support Assembly

(includes illus. nos. 1 through 10)

800860 1 Stainless Steel T umbler and Support Assembly

(includes illus. nos. 1 through 10)
2 150313 24 #10-16 x 1/2” TORX Plus BTN Type 1
3 301307 4 Galvanized Tumbler Rib Only

301407 4 Stainless Steel Tumbler Rib Only
4 100900 4 5/16-18 x 17-1/2” Tie Rod
5 153001 4 5/16” Flat Washer
6 800610 1 Tumbler Support Only
7 152004 4 5/16-18 Hex Nut
8 153002 4 5/16” Lock Washer
9 153001 4 5/16” Flat Washer
10 116002 1 Felt Collar Only

401010 1 #847 Adhesive for Felt Collar (5.0 oz. tube)...Not Illustrated

* Felt collar is not included and must be ordered separately.

12 American Dryer Corporation 450436-1