Rev. 10/01
Los Angeles Ca. 90058
www.americandj.com
American DJ®
4295 Charter Street
User Instructions
Use of a different type fuse from that which is recommended may
cause fire or electric shock and will void the manufactures warranty.
otherwise instructed by an authorized American DJ
©American DJ® - www.americandj.com - Luna 4™ Instruction Manual Page 2
® service technician.
Safety Issues: These units may blow a fuse if the maximum allotted
load of 5 amps is reached. If the fuse needs replacement, always
replace the fuse with same exact type that was remove, unless
Caution! There are no user serviceable parts inside these units. Do
not expose this system to rain or moisture.
not attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event any of your units require service please
contact your nearest American DJ dealer.
PLEASE do not discard the shipping carton in the trash. Please
recycle when ever possible.
E-mail: support@americandj.com
Warning! To prevent or reduce the risk of electrical shock or fi re, do
Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacifi c
Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2610
suggestions. For service related issue please contact American DJ®.
Customer Support: American DJ® provides a toll free customer
light show in a relatively small package. For best results use this system
with fog to enhance the output of the beams.
master unit comes with several built-in programs and is activated by
sound. This system is great for mobile DJ’s, bands, and small clubs.
The system is system set up and easy in minutes and packs a powerful
you need for a great portable lighting system is included in this one
package. The system come with one master unit and three slave units.
The slave units will react to programs built into the master unit. The
support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
Introduction: Thank you for purchasing the Luna 4™ by American
tems includes; 3 XLR cable, 4 Luna units, and 1 controller). Everything
DJ®. The Luna 4™ is a prepackage moonflower lighting system (Sys-
Luna 4™ Introduction
• Bright ZB-64514 120v/300w Lamp
©American DJ® www.americandj.com Luna 4™ Instruction Manual Page 3 ©American DJ® www.americandj.com Luna 4™ Instruction Manual Page 4
Luna 4™ Features
number. If the unit is under warranty, you must provide a copy of your
proof of purchase invoice. Please contact American DJ
support for a R.A. number.
® customer
We recommend you fill out the enclosed warranty card to validate your
purchase. All returned service items whether under warranty or not,
must be freight pre-paid and accompany a return authorization (R.A.)
• Includes Blackout Remote Controller
• Sound-Active
• Easy Access Lamp Replacement Door
• Master/Slave Operation with Built-In Chase Programs
The Luna 4™ system carries a one year (365 days) limited warranty.
fi rst contacting customer support.
Luna 4™ Product Registration
Unpacking: Every Luna 4™ system has been thoroughly tested and
Specifications.................................................................................11
Luna 4™ Unpacking
Lamp Replacement...............................................................8
Cleaning................................................................................9
Warranty..............................................................................10
Controls & Functions................................................................5
Set-Up....................................................................................6
Operation..............................................................................7
Introduction...................................................................................2
Unpacking....................................................................................3
Safety Precautions.......................................................................4
Luna 4™ Contents
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping. If
the carton appears to be damaged, carefully inspect your units for any
damage and be sure all accessories necessary to operate the system
have arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return the system to your dealer without
fi xture.
• Cleaning -The fi xture should be cleaned only as recommended by
the manufacturer.
• Heat -The fi xture should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (includ-
ing amplifi ers) that produce heat.
• The fi xture should be serviced by qualifi ed service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The fi xture does not appear to operate normally or exhibits a
marked change in performance.
for your unit.
• Do not attempt to operate this unit if the power cord has been frayed
or broken. Please route your power cord away from foot traffi c.
• Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and fi re in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the top cover under any conditions. There are no
user serviceable parts inside.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit if it becomes damaged in any way.
• Never operate this unit when it’s cover is removed.
• To reduce the risk of electrical shock or fi re, do not expose this unit
rain or moisture
• This unit is intended for indoor use only, use of this product outdoors
voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-Cord Protection - Power-supply cords should be route
so they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords a plugs,
convenience receptacles, and the point where they exit from the
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required voltage
Luna 4™ Safety Precautions
slave unit as channel one.
3. Channel 2 Output - This outlet will control the operation of any3
slave unit as channel two.
4. Channel 3 Output - This outlet will control the operation of any
slave unit as channel three.
5. Power Cord - Connect only to a matching power outlet. Never use
this fi xture if the ground prong has been removed or broken off.
6. Fuse Holder - This housing stores the 5 amp GMA protective
fuse. Always replace with the exact same type fuse, unless other-
wise instructed to do so by an authorized American DJ service tech-
nician.
7. Microphone - This microphone receives external low frequencies
to trigger the unit. Tapping on the unit and high pitched sounds may
not trigger the unit.
©American DJ® - www.americandj.com - Luna 4™ Instruction Manual Page 5 ©American DJ® - www.americandj.com - Luna 4™ Instruction Manual Page 6
1. Remote Control Input - Do not attempt to connect an audio
signal to this jack, this will damage the unit! This jack is for
use with the Luna4/C controller only. Connecting an audio signal
this jack, this will damage the PC board and void your manufactures
warranty!
2. Channel 1 Output - This outlet will control the operation of any
65
Luna 4™ Controls and Functions
DMX512 OUT
3-PIN XLR
Figure 2
3 Hot
1 Ground
XLR Male Socket
2 Cold
7
XLR microphone cables for data input and data output (Figure 1).
The system includes three cables. If you require
cables of different or extended lengths, you may
uses any standard microphone cable or con-
struct your own. If you are constructing your own
cables, be sure to use standard two conductor
shielded cable (this cable may be purchased at
almost all pro sound and lighting stores). Your
cables should be made with a male and female
XLR connector on either end of the cable. Also
remember that DMX cable must be daisy chained
Do not use the ground lug on the XLR connector. Do not connect the
cable’s shield conductor to the ground lug or allow the shield conductor
to come in contact with the XLR’s outer casing. Grounding the shield
could cause a short circuit and erratic behavior.
and can not be split.
Notice: Be sure to follow fi gure three when making your own cables.
Data Cable Requirements: Your units require a standard 3-pin
supply before attempting to operate.
version. Due to variations in line voltage from venue to venue, be sure
to plug your “Master” unit into a wall outlet with a matching power
4321
age in your area matches the required voltage for your American DJ®
Luna 4.™ The American DJ® Luna 4
Power Supply: Before plugging your unit in, be sure the source volt-
Luna 4™ Set Up
2
3
DMX -
3
2
DMX512 IN
3-PIN XLR
Figure 3
1
COMMON
DMX +
1
2 Cold
XLR Female Socket
3 Hot
Pin 3 = Data True (positive)
1 Ground
Pin 2 = Data Compliment (negative)
Pin 1 = Shield
XLR Pin Confi guration
™
is available in a 120v and 220v
Figure 1
Linking System: Your Luna 4™ system comes with built-in pro-
grams for a four unit system. Follow the step above for proper linking
and set-up procedures. If the system is not set up completely, black
spots will appear in the programs.
microphone.
Sound Active Operation: This function allows a system to run
Luna 4™ Operation
to the beat of the music without any type of controller.
1. Mount your units in a safe and secure manner.
2. Connect the “slave” units to the “master” unit as detailed in the illus-
tration below.
3. If you wish to use the remote control, connect it now. The remote
control will allow you to activate a blackout mode.
4. Connect the unit to main power.
5. The unit will now react to the bass sound of music via the internal
©American DJ® - www.americandj.com - Luna 4™ Instruction Manual Page 7 ©American DJ® - www.americandj.com - Luna 4™ Instruction Manual Page 8
Master
Slave 1
Remote Control
Slave 2
Slave 3
Retaining screws
customer support.
For any other service related issues, please contact American DJ
Lamp Shield
screwdriver to unscrew and remove the fuse holder. Gently remove
the old fuse and replace it with a new one. Insert the fuse holder back
into the fuse housing and tighten.
5. Remove and replace the lamp.
6. Reassemble in reverse order.
Fuse Replacement: To replace the protective fuse, use a fl at head
4. Carefully remove the protective lamp cover.
Luna 4™ Lamp & Fuse Replacement
Always replace with the exact same type lamp and fuse, unless
otherwise specifi ed by an authorized American DJ® service tech-
nician.
Caution: Always disconnect the main power before performing any
type of service or fuse replacement! Always disconnect the main power
and allow the unit ample time to cool before attempting to replace
the lamp.
Lamp Replacement: Caution! Never open the unit while in use.
1. Be sure to follow the proper procedures when handling halogen
lamps.
2. Lamp replacement has been made simple by incorporating the
use of a removable lamp cover retained by two thumb screw.
3. Remove the thumb screws on the bottom of the unit that holds the
lamp cover in place.
®
Tapp i ng on t he microphone, quiet or high pitched sounds may not
activate the unit.
©American DJ® - www.americandj.com - Luna 4™ Instruction Manual Page 9
1. Be sure you have connected your units into a standard 120V outlet.
2. Be sure the external fuse has not blown.
3. Remove the lamp cover and be sure the lamp is seated in its
socket properly. Occasionally lamps become loose during shipping
be sure the lamp is push in to its socket all the way.
4. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Trouble Shooting: Listed below are a few common problems that you
may encounter, with solutions.
No light output from the unit;
Flight Moon™ Trouble Shooting
operates (i.e. smoke, fog residue, dust, dew).
Luna 4™ Cleaning
lamps with your bare fi ngers as the oil from your
hands will shorten lamp life. Also, never move the
fi xture until the lamps have had ample time to cool.
Remember, lamps are not covered under warranty
conditions.
Luna 4™ Halogen Lamp Warning
Halogen Lamp Warning: This fixture is fitted
with halogen lamps which are highly susceptible
to damage if improperly handled. Never touch the
Due to fog residue, smoke, and dust, cleaning the internal and external
optical lenses must be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outer
casing.
2. Use a brush to wipe down the cooling vents.
3. Clean the external portion of the optics with glass cleaner and a
soft cloth every 20 days. Situation may very. If used heavily in clubs
with lots of fog, cleaning may be required more often.
4. Clean the internal portion of the optics with glass cleaner and a
soft cloth every 30-60 days.
5. Always be sure to dry all parts completely before plugging the
unit in.
Cleaning frequency depends on the environment in which the fixture
supersedes all prior warranties and written descriptions of warranty terms and conditions
heretofore published.
H. Lamps are not covered under this or any other warranty, either written or implied.
©American DJ® - www.americandj.com - Luna 4™ Instruction Manual Page 10
G. This warranty is the only written warranty applicable to American DJ® Products and
or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above;
and under no circumstances shall American DJ® be liable for any loss or damage, direct or
consequential, arising out of the use of, or inability to use, this product.
warranties of merchantability or fi tness, are limited in duration to the warranty period set forth
above. And no warranties, whether expressed or implied, including warranties of merchant-
ability or fi tness, shall apply to this product after said period has expired. The consumer’s and
sory supplied with products described above. Except to the extent prohibited by applicable
law, all implied warranties made by American DJ
® in connection with this product, including
its products without any obligation to include these changes in any products theretofore
manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any acces-
manufactured after January 1, 1990, and bear identifying marks to that effect.
E. American DJ
parts, at the sole discretion of American DJ®. All products covered by this warranty were
® reserves the right to make changes in design and/or improvements upon
parts at its expense, and will absorb all expenses for warranty service and repair labor by
reason of defects in material or workmanship. The sole responsibility of American DJ® under
this warranty shall be limited to the repair of the product, or replacement thereof, including
or periodic check-up. During the period specifi ed above, American DJ
® will replace defective
DJ®; if the product is damaged because not properly maintained as set forth in the instruction
ability of the product; if the product has been repaired or serviced by anyone other than the
American DJ® factory unless prior written authorization was issued to purchaser by American
manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning
of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product
is modifi ed in any manner which American DJ
® concludes, after inspection, affects the reli-
designated point within the United States. If the entire instrument is sent, it must be shipped
in its original package. No accessories should be shipped with the product. If any acces-
sories are shipped with the product, American DJ® shall have no liability whatsoever for loss
B. For warranty service, send the product only to the American DJ
charges must be pre-paid. If the requested repairs or service (including parts replacement)
are within the terms of this warranty, American DJ® will pay return shipping charges only to a
® factory. All shipping
the United States of America, including possessions and territories. It is the owner’s respon-
sibility to establish the date and place of purchase by acceptable evidence, at the time ser-
vice is sought.
free of manufacturing defects in material and workmanship for a period of 1 Year (365 days)
from the date of purchase. This warranty shall be valid only if the product is purchased within
1-YEAR LIMITED WARRANTY
A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be
Luna 4™ Warranty
Please Note: Specifi cations and improvements in the design of
this unit and this manual are subject to change without any prior
written notice.
©American DJ® - www.americandj.com - Luna 4™ Instruction Manual Page 11
COLORS: MULTI-COLORED
WARRANTY: 1 YEAR (365 DAYS)
GOBOS: NONE
* Voltage is preset at the factory
COOLING: FAN COOLED
WEIGHT: 5 LBS / 4.5 KGS (unit)
FUSE: 5 AMP GMA
WORKING POSITION: ANY SAFE POSITION
(with yoke extended)
VOLTAGE
ZB-64516 220v/300w (220v)
*
: 120v~50Hz or 220v~60Hz
LAMP (PER UNIT): ZB-64514 120v/300w or
DIMENSIONS: 11.75"L x 11.25"W x 7.5"H
Luna 4™ Specifications
MODEL: LUNA 4™
Web: www.americandj.com E-mail: info@americandj.com
4295 Charter Street Los Angeles, CA. 90058-2520 USA
Te l: 323-582-2650 Fax: 323-582-2610
American DJ World Headquarters:
©American DJ Supply
Loading...