American DJ Flash-1C, Flash-1CTM User Manual

American DJ

®

Flash-1C™

C a u t i o n ! Always disconnect from main

power before servicing unit. Remember to
always replace with same fuses.

User Instructions

Thank you for purchasing this
American DJ® product. For your

convenience this products ready to
be used, there is no assembly
required. Please read the following
instructions before installing or
using your new unit.

Model: Flash-1C™

SPECIFICATIONS:

Power: 110V/60Hz
Weight: 3 lbs.
Size: 11.25” x 5.25” x 3”

Fuse: 10A

American DJ

Operating Instructions:

The American DJ® Flash-1C, flash tube controller
is ideal for mobile DJ’s and club use. One Flash­1C will control up to 20 Flash Tubes. The Flash
Tubes can be controlled in two ways AUTO o r
M A N U A L (blue button). When switch is on
MANUAL , the user has control of the SPEED and
and MODE knobs . Only by pushing the yellow
TRIGGER button, will the Flash Tubes light.
When switch is on AUTO, the user has control of
SPEED, MODE, and pulse RATE knobs.

SPEED knob - Controls speed of chase.
MODE knob - Coose 1 of 5 mode to chase in.

RATE knob - Controls rate of pulse (ie. speed of

strobe) of the Flash Tubes.

For service, contact your American DJ® dealer.

LOS ANGELES, CA. 90058 USA

®

1. Forward 2. Reverse

3. Crossover 4. Rebound

5. Auto chase