American DJ Fan-1000 User Manual

American DJ®

™

F A N - 1 0 0 0

WITH 10 LENSES!

CAUTION!

Read instructions before installing or plugging unit in.

SPECIFICATIONS: MODEL - Fan-1000™

Weight: 18 lbs.
Size: 14"H x 14"W x 16”L
Lamps: ZB-FDF - 120V 500W
Fuse: 6A
Supply Voltage: 120V
Working Position: Any Safe position
Duty Cycle: 10 min. ON, 10 min. OFF
Colors: 10 Multiple Colored Lenses

User Instructions

HALOGEN LAMP WARNING!
This fixture is fitted with halogen

lamps which are highly susceptible
to damage if improperly handled.
Never touch lamp with bare fingers
as the oil from your hands will
shorten lamp life. Also, never move
fixture until lamp has had ample
time to cool. Remember, lamps are
not covered under warranty
conditions.

Product Discription:

The Fan-1000™ features a extremely bright 500W lamp that creates 10 FLAT beams of multi-color light which rotate back
and forth to the music via its internal microphone. The Fan-1000™ is rugged and light weight, ideal for permanent or mobile
applications.

Operating Instructions:

Unit is ready to be hung or set on flat surface. Unit will react to bass sound of music via its internal microphone. Adjust the
sensitivity knob on rear of unit for desired effect. Be sure not to obstruct cooling vents and keep in a well ventilated area.
For best results, fog or special effects smoke should be used in order to see the beams of light.

Caution! Never open unit when in use. Always disconnect main power before serving or replacing lamp. Remember always
replace same lamp and fuses.

Lamp replacement: Unscrew lamp replacement door. Remove and replace lamp.

Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 90058