American DJ Entour Haze Pro Service Manual

Caution: Haze Machines may set off Smoke Alarms!

User Instructions

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

The Netherlands

www.americandj.eu

10/17

A.D.J. Supply Europe B.V. – www.americandj.eu – Entour Haze Pro Instruction Manual Page 2

©2017 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions
herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and
numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and
matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter
granted. Product names used in this document may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged. All non-ADJ Products, LLC brands and product names are
trademarks or registered trademarks of their respective companies.

ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment,
building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with
the use or reliance of any information contained within this document, and/or as a result of the improper,
unsafe, unsufficient and negligent assembly, installation, rigging, and operation of this product.

DOCUMENT VERSION

Please check www.adj.com for the latest revision/update of this guide.

Date

Document Version

Software

Version ≥

DMX Channel

Mode

Notes

10/24/17

1

1.01

1/2/4

Initial Release

Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the environment. Please turn off all electrical products when they are not
in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank
you!

A.D.J. Supply Europe B.V. – www.americandj.eu – Entour Haze Pro Instruction Manual Page 3

Contents

INTRODUCTION ....................................................................................................................................................................... 4

SAFETY PRECAUTIONS ............................................................................................................................................................ 4

DMX INFORMATION ............................................................................................................................................................... 5

LAYOUT ................................................................................................................................................................................... 7

DIMENSIONAL DRAWING ....................................................................................................................................................... 8

GENERAL SET-UP ..................................................................................................................................................................... 8

CONTROL PANEL ..................................................................................................................................................................... 9

START UP ................................................................................................................................................................................. 9

OPERATION ........................................................................................................................................................................... 10

DMX MODE ........................................................................................................................................................................... 11

1 CHANNEL MODE ................................................................................................................................................................ 11

2 CHANNEL MODE ................................................................................................................................................................ 11

4 CHANNEL MODE ................................................................................................................................................................ 12

MAINTENANCE ...................................................................................................................................................................... 12

TROUBLE SHOOTING ............................................................................................................................................................. 12

FUSE REPLACEMENT ............................................................................................................................................................. 12

STORAGE ............................................................................................................................................................................... 12

SPECIFICATIONS .................................................................................................................................................................... 13

ROHS - A great Contribution to the Conservation of Environment ..................................................................................... 14

WEEE – Waste of Electrical and Electronic Equipment ........................................................................................................ 14

NOTES ................................................................................................................................................................................... 15

A.D.J. Supply Europe B.V. – www.americandj.eu – Entour Haze Pro Instruction Manual Page 4

INOZIONE
INTRODUCTION

Introduction: Congratulations, you have just purchased one of the most reliable haze machines on the market
today! The Entour Haze Pro faze machine have been designed to perform reliably for years when the
guidelines in this booklet are followed. Please read and understand the instructions in this manual carefully
and thoroughly before attempting to operate this unit. These instructions contain important information
regarding safety during use and maintenance.

Customer Support: If you encounter any problems, please contact your trusted American Audio shop. We
also offer the possibility, to contact us directly: You can contact us via our website www.americandj.eu or via
email: [e-mail]

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will

void your manufactures warranty. In the unlikely event your unit may require service please contact ADJ
Products, LLC.
Do not discard the shipping cartoon in the trash. Please recycle whenever possible.

SAFETY ISSUES:
NEVER POINT OR AIM A HAZE MACHINE TOWARDS PEOPLE OR THEIR CLOTHING. THIS UNIT EMITS
HOT VAPOR AND SHOULD BE USED WITH THE SAME CARE THAT YOU WOULD OBSERVE WHEN
USING AN ELECTRIC KETTLE OR IRON.

Please Note: Specifications and improvements in the design of this unit and this manual are subject to change
without any prior written notice.

SAFETY PRECAUTIONS

• Be sure to save the packing carton in the unlikely event the unit may have to be returned for service

• Do not spill water or other liquids into or on to your hazer. Be sure that all the haze fluid is kept inside the

fluid reservoir

• Be sure that the local power outlet match that or the required voltage for your haze machine

• Do not remove the top cover under any conditions. There are no user serviceable parts inside

• Disconnect the unit’s main power when left unused for long periods of time

• Never connect this unit to a dimmer pack

• Do not attempt to operate this unit, if it becomes damaged in anyway

• Never operate this unit when it’s cover is removed

• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture

• Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or

break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock
and fire in case of an internal short

• Disconnect from main power before making any type of connection

• Never block the ventilation holes. Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall

• This unit is intended for indoor use only, use of this product outdoors voids all warranties

• Always mount this unit in a safe and stable matter

• Please route your power cord out of the way of foot traffic. Power cords should be routed so they are not

likely to be walked on, pinched by items placed upon or against them

• The unit should only be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked change in performance.

A.D.J. Supply Europe B.V. – www.americandj.eu – Entour Haze Pro Instruction Manual Page 5

DMX INFORMATION

Power Supply: Before plugging your unit in, be sure the source voltage in your area matches the required
voltage for your ADJ Entour Haze Pro. The ADJ Entour Haze Pro is available in a 120v and 230v version.
Because line voltage may vary from venue to venue, you should be sure your unit voltage matches the wall
outlet voltage before attempting to operate you fixture.
DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used as a form of communication
between intelligent fixtures and controllers. A DMX controller sends DMX data instructions from the controller
to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA
“OUT” XLR terminals located on all DMX fixtures (most controllers only have a DATA “OUT” terminal).
DMX Linking: DMX is a language allowing all makes and models of different manufactures to be linked
together and operate from a single controller, as long as all fixtures and the controller are DMX compliant. To
ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path
possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For
example; a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at
the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows
to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.
Data Cable (DMX Cable) Requirements (For DMX Operation): The Entour Haze Pro can be controlled via
DMX-512 protocol. The Entour Haze Pro has 3 DMX channel modes, 1 channel, 2
channel, and 4 channel. The DMX address is set on the back panel. Your unit and your
DMX controller require a standard 3-pin XLR connector for data input and data output
(Figure 1). We recommend Accu-Cable DMX cables. If you are making your own
cables, be sure to use standard 110-120 Ohm shielded cable (This cable may be
purchased at almost all pro lighting stores). Your cables should be made with a male
and female XLR connector on either end of the cable. Also remember that DMX cable
must be daisy chained and cannot be split.
Notice: Be sure to follow figures two and three when making your own cables. Do not use the ground lug on
the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor

to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic

behavior.

Figure 2

XLR Pin Configuration

Pin1 = Ground

Pin2 = Data Compliment (negative)

Pin3 = Data True (positive)

Figure 3

Figure 1