American Diagnostic Corporation (ADC) ADC Instructions

After taping the specula drilling template in the desired

TM

ADSTATION

Modular Diagnostic System

Diagnostix

T

M

position on the wall, drill the 2 appropriate holes (7/32”
(5.556 mm) diameter, and 1.25” (32 mm) deep as indicated.
Push the supplied mollies as far as they will go into the
drill holes in the wall.

Put the spacer sleeves supplied (1) onto the dome (2) of
the holder (3).

The screws should now be pushed into the holes
provided (4) in the holder (3).

Place the holder on the wall so that the screws line up
with the plugs and screw them in tightly.

When the holder is firmly in place on the wall, the
casing should be attached to the holder as follows.

Place the casing on the holder such that the T-grooves
(5) lie exactly over the T-groove guides (6), the casing
should now be pushed evenly backwards until it snaps
into position. The casing should be level with the
viewing windows of the holder.

Place the lid (7) in the intended location (8).

The specula can now be filled as desired.

Specula Extension Assembly Instructions

ADC
55 Commerce Drive
Hauppauge, NY 11788

ADC (UK) Ltd.
Unit 6, PO14 1TH
United Kingdom

Consult instructions
for use

Type BF applied part

Inspected and Packaged in the U.S.A.

Made in Germany

tel: [phone]

toll free: 1-800-232-2670

fax: [phone]

www.adctoday.com

email: [e-mail]

IB p/n 93-5630-00 Printed in U.S.A.