American Audio COMMANDER PLUS User Manual Rev 1-2

CH1

CH2

CH3

CH4

MIC1

MIC2

MASTER

4030

MASTER

ASS

ASSIGN

ALK

ASSIGN

AUX

ALKOVER

ASSIG

TREBLE

COMMANDER

plus

EFFE

UTOUT

GAI

+20

EFFE

+20

PHON

UT UT

-1

LOWC

FFE

PHON

IGN C

LOWCU

EFFE

HON

+15

GAI

LOW

EFFE

LINE

GAI

-1

EFFE

COMMANDER

ROFESSIONAL

ALAN

TEREO

PLITCU

UE MIXIN

RECEIV

MON

ZONE1

TREBL

LUME

PGM

LIGH

POWE

TERE

ZONE2

TREBL

VOLUM

NE2

PHONE

LEVE

Rev 01/02

User Guide

and Reference Manual

4295 Charter Street

Los Angeles Ca. 90058

www.americandj.com

©American Audio® - www.americandj.com - Commander Plus™ Instruction Manual Page 2

COMMANDER PLUS™ CONTENTS

MAIN FEATURES....................................................................................................................................3

ELECTRICAL PRECAUTIONS...............................................................................................................5

SAFETY PRECAUTIONS.......................................................................................................................6

INTRODUCTION....................................................................................................................................7

SET-UP PRECAUTIONS.........................................................................................................................7

QUICK START.........................................................................................................................................8

UNPACKING...............................................................................................................................8

FUNCTIONS AND CONTROLS

FRONT PANEL............................................................................................................................9

REAR PANEL............................................................................................................................15

CLEANING......................................................................................................................20

CROSS FADER REPLACMENT..........................................................................................................20

WARRANTY.........................................................................................................................................21

SPECIFICATIONS.....................................................................................................................22

COMMANDER PLUS™ MAIN FEATURES

• Feather Fader Plus for Q-Start Control

• 3 Phono, 6 Line, 3 Auxiliaries & 3 Mic Inputs

• Balanced outputs • Rotary Kills

• High quality Feather Fader™ for smooth, clean cross fades (replaceable)

• Bass, Mid, and Treble for each channel

• 2 Independent Microphones with Separate EQ with combo connection (1/4”/XLR) - 3rd Mic on channel 4

• 2 Zone Outputs with Bass and Treble Control

• Zone 2 is assignable to any of the 4 channels

• Mono/Stereo Switches on Master & Zones

• High level headphone output

• Cue mixing

• Split cue for headphones

• Low cut bass switch / -30dB cut feature for bass

• Auto mute

• Talk Over Button - Reduces channel output Gain by 15dB +/- 2 dB

• Send & receive for every channel including independent mics - all selectable at the same time

• Left & right turntable ground connectors conve-

niently located at each end of the rear panel

• Master level LED display w/ peak hold

• Pre Fader Levels (PFL) for each channel

• Accurate beat LED’s for easy cross fades

• On/Off switch for channel assign

• LED display for each channel

• Gain control for each channel

• Independent light control output for touch panels and chase controllers -

• Soft-touch rubber knobs for better control

• 12V DC BNC connector for gooseneck light

• Rear inset “L” shape case design

• 120v/220v selectable

• Q-Start Compatible (for use with American Audio CD Players with Fader “Q” Start)

• Fader “Q” Start on channels 1 & 2

• 2 year limited warranty

• High output to headphones Light Control Signal Output Jack

• Dual Stereo LED Level Indicator Indicated Master Level

• Master Output Pan Control

• Balanced XLR Output

©American Audio® - www.americandj.com - Commander Plus™ Instruction Manual Page 3

COMMANDER PLUS™ ELECTRICAL SAFETY PRECAUTIONS

LINE 3

PHONO 3

LINE 5 LINE 4 LINE 2

CH-1

CH-2

CH-3

MASTER

REC

ZONE 1

OUTPUT

GND

AC INPUT 115/230V

FUSE 0.5A,F,250V

CAUTION:

ATTENTION:

DISCONNECT SUPPLY CORD

BEFORE CHANGING FUSE.

DEBRANCHER AVANT DE

REMPLACER LE FUSIBLE.

CAUTION:

ATTENTION:

TO REDUCE THE RISK OF FIRE,

REPLACE ONLY WITH THE SAME

TYPE AND RATING OF FUSE.

UTILISER UN FUSIBLE DE

RECHANGE DE MEME TYPE.

AMERICAN AUDIO

PREAMP MIXER

MODEL NO. COMMANDER PLUS

AC 115/230V ~ 50/60HZ 20W

PAS OUVRIR.

RISK OF ELECTRIC SHOCK

AVIS:RISQUE DE CHOC ELECTRIQUE-NE

CAUTION

DO NOT OPEN

CH-4

LINE 6

BALANCED OUTPUT

LEFT

RIGHT

AUX 3

PHONO 2

AUX 2

PHONO 1

AUX 1

LINE 1

AUX 1 PHONO 1PHONO 2

AUX 2

PHONO 3

AUX 3

GND

LIGHT CONTROL

ZONE 2

SEND

RECEIVE

EFFECT

MIC 3

PLAYER CONTROL

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN, LIQUIDS, OR MOISTURE

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER TYPE OF ELECTRICAL OUTLET UNLESS THE WIDE BLADES CAN BE CAREFULLY INSERTED INTO A MATCHING WIDE SLOT.

ATTENTION: POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.

LINE VOLTAGE SELECTION

• The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel (using a flat head screw driver).

• Do not force the VOLTAGE SELECTOR switch as this may cause damage

• If the VOLTAGE SELECTOR switch does not move smoothly, please contact a quali fied service technician.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS:RISQUE DE CHOC ELECTRIQUE-NE

PAS OUVRIR.

CAUTION:

DISCONNECT SUPPLY CORD

BEFORE CHANGING FUSE.

ATTENTION:

DEBRANCHER AVANT DE

REMPLACER LE FUSIBLE.

CAUTION:

TO REDUCE THE RISK OF FIRE,

REPLACE ONLY WITH THE SAME

TYPE AND RATING OF FUSE.

ATTENTION:

AC INPUT 115/230V

FUSE 0.5A,F,250V

UTILISER UN FUSIBLE DE

RECHANGE DE MEME TYPE.

VOLTA GE SELECTOR SWITCH

AMERICAN AUDIO

MODEL NO. COMMANDER PLUS

GND

PREAMP MIXER

AC 115/230V ~ 50/60HZ 20W

BALANCED OUTPUT

RIGHT

RECEIVE

LEFT

ZONE 2

SEND

EFFECT

ZONE 1

REC

OUTPUT

NOTE: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electrical appliances such as radios and televisions, use shielded cables and connectors for connections.

©American Audio® - www.americandj.com - Commander Plus™ Instruction Manual Page 4

The serial and model number for this unit is located on the rear panel. Please write down the numbers here and retain for future reference.

Model No._____________________________

Serial No._____________________________

Purchase Notes:

Date of Purchase_______________________

Dealer Name__________________________

Dealer Address_________________________

_____________________________________

Dealer Phone__________________________

COMMANDER PLUS™ ELECTRICAL SAFETY PRECAUTIONS

ELECTRICAL PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER SERVICE TO YOUR AUTHORIZED AMERICAN AUDIO

SERVICE TECHNICIAN.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

READ INSTRUCTIONS — All the safety and operating

instructions should be read before the product is operated.

RETAIN INSTRUCTIONS — The safety and operating

instructions should be retained for future reference.

HEED WARNINGS — All warnings on the product and

in the operating instructions should be adhered to.

FOLLOW INSTRUCTIONS — All operating and use

instructions should be followed.

CLEANING — The product should be cleaned only with

a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet.

ATTACHMENTS — Do not use attachments not

recommended by the product manufacturer as they may cause hazards.

WATER AND MOISTURE — Do not use this product

near water — for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

ACCESSORIES — Do not place this product on an

unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

CART — A product and cart combination should be

moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

VENTILATION — Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

POWER SOURCES — This product should be operated

only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

LOCATION – The appliance should be installed in a

stable location.

NONUSE PERIODS – The power cord of the appliance

should be unplugged from the outlet when left unused for a long period of time.

GROUNDING OR POLARIZATION

•If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

•If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

POWER-CORD PROTECTION - Power-supply cords

should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

OUTDOOR ANTENNA GROUNDING — If an outside

antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure A.

LIGHTNING — For added protection for this product

during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

POWER LINES — An outside antenna system should

not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

OVERLOADING — Do not overload wall outlets,

extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

ELECTRIC SERVICE EQUIPMENT

Fig. A

OBJECT AND LIQUID ENTRY - Never push objects of

any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

SERVICING — Do not attempt to service this product

yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

DAMAGE REQUIRING SERVICE - Unplug this product

from the wall outlet and refer servicing to qualified service personnel under the following conditions:

•When the power-supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the product.

•If the product has been exposed to rain or water.

• If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

• If the product has been dropped or damaged in any way.

•When the product exhibits a distinct change in performance — this indicates a need for service.

REPLACEMENT PARTS -- W hen replacement parts

are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

SAFETY CHECK - Upon completion of any service or

repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

WALL OR CEILING MOUNTING — The product should

not be mounted to a wall or ceiling.

HEAT — The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

NEC — NATIONAL ELECTRICAL CODE

COMMANDER PLUS™ SAFETY INSTRUCTIONS

1. For adult use only - Keep out of the reach of children.

2. Water and Moisture - The player should not be used near water - for example, near a bath tub, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc. Do not spill water or other liquids in to or on to your mixer.

3. Ventilation - The Mixer should be situated so that its location or position does not interfere with its proper ventilation. For example, the Mixer should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

4. Heat - The Mixer should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

8. Never plug this mixer in to a dimmer pack.

9. Do not let insecticides, benzene, or thinner come in contact with the surface of the unit.

10. This unit is intended for indoor use only, use of this product outdoors voids all warranties.

11. Always mount this unit in safe and stable matter.

12. Disconnect from main power before making any type of connection.

13. Cleaning - The mixer should be cleaned only as recommended by the manufacturer. Use a soft cloth to wipe down the outside of the unit. For stubborn stains moisten a soft cloth with glass cleaner or other mild detergent to wipe away any stains. Use a soft cloth to wipe any residual cleaner. Never use volatile cleaners such as benzene, solvent, or thinner to clean your unit, these cleaners will damage the units surface.

5. Power Sources - The Mixer should be connected to a power supply (wall outlet) only of the type described in the operating instructions or as marked on the Mixer.

6. Servicing -The user should not attempt to service the Mixer beyond that described in the operating instructions. There are no user serviceable parts inside. All other servicing should be referred to qualified service personnel. The Player should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged. B. Objects have fallen, or liquid has been spilled into the Mixer. C. The Mixer has been exposed to rain or water. D. The Mixer does not appear to operate normally or exhibits a marked change in performance.

7. Never disassemble or modify your unit in any way, doing so will void your manufactures warranty.

14. Handle the power supply cord carefully. Do not damage or deform; it may cause electric shock or malfunction when used. Hold plug attachment when removing from wall outlet. Do not pull on the cord.

15. To avoid electric shock, do not open the top cover when the unit is plugged in. If problems occur with the unit, call American Audio

® cus-

tomer support.

16. Do not place metal objects or spill any liquids inside or on the mixer. Electric shock or malfunction may occur.

17. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the mixer. Route your power cord out of the way of foot traffic.

18. Always have the front gain controls set to their lowest level during initial power-up to prevent speaker damage.

COMMANDER PLUS™ INTRODUCTION

Introductions: Congratulations and thank you for purchasing the American Audio® Commander

Plus™ mixer. This mixer is a representation of American Audio’s continuing commitment to produce the best and highest quality audio products possible at an affordable price. Please read and understand this manual completely before attempting to operate your new mixer. Please carefully read and understand the instructions in this manual thoroughly before attempting to operate this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Take special care to follow all warning symbols and labels both on the unit and printed in this manual. Also, Please keep this manual with the unit, for future reference.

Customer Support: American Audio question should you encounter problems during your initial set up or operation. You may also visit us on the web at www.americandj.com for any comments or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:30 p.m. Pacific Standard Time. Voice: (800) 322-6337 Fax: (323) 582-2610 E-mail: support@americandj.com

Caution! There are no user serviceable parts inside this mixer. Do not attempt any repairs yourself, without being instructed to do so by an authorized American Audio service technician. Doing so will void your manufactures warranty. In the unlikely event your mixer may require service, please contact American Audio

® provides a toll free customer support line, to provide set up help and answer any

® customer support.

Do not discard the packing carton in the trash. Please recycle when ever possible.

COMMANDER PLUS™ SET-UP PRECAUTIONS

Please be sure to make any connections before plugging the mixer in to an electrical outlet. All fader and volume controls should be set to zero or minimum position, before the mixer is switched on. If the mixer has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch on the mixer immediately. The arising condensation of water might damage your device. Leave the device switched off until it has reached room temperature.

Operating Determinations:

• When installing this mixer, please make sure that the device is not exposed or will not be exposed to extreme heat, moisture or dust!

• Do not operate the mixer in extremely hot (more than 30°/100°F) or extremely cold (less than 5°C/40°F) surroundings.

• Keep the unit out of direct sunlight and away from heaters.

• Operate the mixer only after becoming familiar with its functions. Do not permit operation by persons not qualified for operating the mixer. Most damages are the result of unprofessional operation!

• Do not attempt to operate this mixer if the power cord has been frayed or damaged.

• Disconnect from main power before making any type of connection.

• Do not attempt to operate this mixer, if it becomes damaged in any way.

• Never operate this mixer when it’s covers are removed.

• To reduce the risk of electrical shock or fire, do not expose this mixer rain or moisture.

• This mixer is intended for indoor use only, use of this product outdoors voids all warranties.

• During long periods of non-use, disconnect the mixer’s main power.

COMMANDER PLUS™ QUICK START INSTRUCTIONS

QUICK START: American Audio® would like to thank you for your purchase of this great audio product. For those of you that are too impatient to read the entire user manual we have compiled these quick start instructions. We hope that you will at least read through these instructions to familiarize yourself with the basics of this mixer. The Commander Plus™ is part of American Audio’s continuing evolution in audio technology. This unit has been built and designed to meet the needs of a typical DJ. We have attempted to provide you with the most reliable product on the market by using only components constructed of the finest material.

MASTER LEVEL - Use this level to control your main volume output. Try never to send an output of more than +4dB to your system. Signal at levels higher than this will start to distort and may cause damage to your system and speakers. Remember that a distorted signal from you mixer will only be multiplied throughout your system.

CHANNEL GAIN LEVEL - The channel gain levels are not to be used as volume controls. Never use the channel trim to set the output volume. These controls are used to aid in distortion control. Use these control to preset your signal level before the crossfader. With your channel faders in the maximum position, use the channel trim level to set an average output level of about +4dB on you master level meter.

HEADPHONES - To avoid damaging your headphones always be sure the headphone volume level (27) is set to minimum before plugging them in. To avoid sever hearing damage, never put the headphone on without making sure the headphone level is turned down.

MAIN MIC - The main mic connector uses a combo plug that allows you to connect either a 1/4” unbalanced jack or by a standard 3-pin XLR balanced connector. The main mic also has an independent volume control with separate high and low level adjustments. When feedback occurs when using the mic, try lowering the “low” level this may reduce the feedback. Always leave the mic level to it’s minimum level when not in use.

PHONO/AUX LINE LEVEL SELECTOR SWITCH (31) - This switch is used to change the selected input from phono to line and vice versa. The switch selectors are on the rear panel.

COMMANDER PLUS™ UNPACKING

Every Commander Plus™ has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your mixer for any damage and be sure all equipment necessary to operate the mixer has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions. Please do not return the mixer to your dealer without first contacting customer support.

+ 16 hidden pages

American Audio COMMANDER PLUS User Manual Rev 1-2

Specifications and Main Features

Frequently Asked Questions

User Manual