AME-Link CL-3333 USER' S MANUAL

Download

Page 1

Table of Contents

CL-3333

USER'SMANUAL

Alpha Index

General

Getting Started

Basic Functions

SMS - Short Message Service

Call Lists

Handset & Base Setting

Extra Setting

Menu Structure Map

Troubleshooting

Additional Information

Page 2

Introduction

Congratulations on buying this cordless phone. Your new DECT (Digital Enhanced Cordless Telephone) is designed with advanced features. Similarly to GSM, this technology allows you to get the benefits of the digital wireless communication systems, which are better protected against interferences, tapping and intrusions. Moreover, there are a lot of features you will enjoy, the most important ones are:

Ease of use - the large LCD display and the "cellular feeling" software commands make the equipment user friendly, even by non expert people.

Color LCD display - customizable with wallpapers and backgrounds.

Alphanumeric phonebook - allows you to call your frequently used numbers (up to 250). It saves your time and money, because you can quickly call them and reduce the risk of wrong dialing.

!!SIM card reading - you can copy the phonebook from your mobile phone into

the phonebook of your cordless phone. This let you save time and reduce dialing mistakes by using the same phonebook of your mobile phone. Handsfree operation - the speakerphone of your handset allows you to enjoy

the handsfree conversations. Just put the handset on your desk and talk in total freedom. Moreover, for operation in very noisy environments, you can also use the external earphone/microphone. 12 polyphonic rings tones with sleep mode - the ring volume automatically switches to the minimum volume in order not to disturb you in night time. Very convenient if your phone is located near a bedroom.

Caller Display - to see who is calling and keep track of unanswered calls.

SMS capability - you can send and receive SMS messages just as a GSM phone.

"Organizer" functions - your phone can be used as a convenient alarm, also as a calculator.

Personal cordless network - you can create your personal cordless phone network by connecting up to 5 (optional) handsets to your base. Moreover, every handset can access up to 4 (optional) base units in order to extend the total wireless coverage.

...and many others!

Note: The manufacturer is committed to continuous quality improve, for this

reason specifications and features may vary without prior notice.

Services such as Caller Display and SMS are available only if provided by your

local telephone network.

* This product meets the applicable Industry Canada technical specifications.

* This device complies with FCC Part 15 regulation. Operation is subject to the

following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

Page 3

Warranty

One-Year Limited Warranty

Important

ELEMENTS OF WARRANTY

original owner, this Xingtel Product to be free from defects in material and craftsmanship with only the limitations or exclusions set out below.

WARRANTY DURATION

and be of no further effect 12 months after the date of original sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Xingtel Canada other than an authorized Xingtel service center for a defect or malfunction covered by this warranty, (E) used in conjunction with equipment or parts or as part of any system not manufactured by Xingtel Canada by the owner's manual for this product.

STATEMENT OF REMEDY

to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit without charge for parts, service or any other costs (except shipping and handling) incurred by the warrantor or its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit.

THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.

LEGAL REMEDIES

warranty is void outside of Canada.

: Evidence of original purchase is required for warranty service.

: Xingtel Canada warrants, for one year, to the

Canada

: This warranty to the original user shall terminate

, (C) improperly installed, (D) serviced or repaired by someone

Canada

, or (F) installed or programmed by anyone other than as detailed

: In the event that the products does not conform

: This warranty gives you specific legal rights. This

Warning Notes

Your DECT cordless telephone has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, however, there are a few basic precautions you should take to avoid hurting yourself or damaging the unit:

Read the instructions in this handbook carefully. Be sure to save it for future reference.

Read and follow all warning and instruction labels on the equipment itself.

Be sure to use only the supplied AC adapter and that your power source matches the rating listed for it. If you are not sure, check with your dealer or with your local power company.

Avoid strong shocks. Don't use the AC adaptor if it has received any hard knocks or looks damaged in any way; immediately contact an authorised service cente .

Grasp your handset firmly. Otherwise it may fall and be damaged.

Do not operate in an explosive atmosphere.

Do not use the phone near water, or spill liquid of any kind on it. If you think that some liquid is penetrated into the phone, immediately unplug it, dry it by a soft and clean cloth and contact your dealer.

Respect the environment conditions. All the parts of this equipment are designed for indoor use only. Never expose them to extremely hot or cold temperature. Don't expose the cordless telephone to excessive vibrations as well as dusty or rainy places.

Never try to disassemble or service the equipment by yourself (aside from the routine maintenance described in this handbook). It will immediately void the warranty and you may cause damage requiring extensive repair work. Always contact your local dealer for assistance.

Handle the batteries properly. Particularly, strictly follow the directions stated in the handbook.

Never use the phone with non suitable batteries and charge them only with the supplied base. The use of any non genuine parts can create hazards, electric shocks and other risks. Moreover it will void the warranty.

In case of problems, please refer to this user's manual or contact your dealer and/or the nearest official service cente . Every service operation not provided by official service cente s will void the warranty.

Use always good sense! Don't go on with any operations if you are not sure what you are really doing. In case of doubts please contact your dealer.

This equipment is not able to make calls (including emergency ones) when the mains power fails, when the handset batteries need to be charged (or are faulty), when the keypad is locked.

This product must not be used near emergency medical equipment or by people with medical equipment fitted (e.g. pacemakers). Moreover, the radio signals between the handset and the base may interfere with hearing aids causing strong noise.

Additional

Information

TO OBTAIN WARRANTY SERVICE

its original carton, box or equivalent, properly packed, fully insured with shipping charges prepaid, together with a copy of your bill of sale or other proof of purchase and a description of the problem to any of the Xingtel Canada Service Facilities in Canada.

: Ship your Ame-Link DECT Phone in

Page 4

Table of

Contents

Table of Contents

General

Feature List The Unit Layout Key Functions Handset Display

Getting Started

Package Contents

Connection

Installing the Batteries

Charging the Handset Batteries

Turning Handset On/Off

Registering a New Handset

Deactivating a Handset

Choosing the Dial Mode

Setting Date & Time

Basic Functions

Making a Call

Receiving a Call

Adjusting Voice Volume

Muting a Call

Using Speakerphone

Redialing Last Dialed Number

Flash Signal

Using a Pause

Out of Range Indication

Locking the Handset Keypad

Paging

Temporary Tone Dial Switchover

Intercom

6 8 9 11

Alpha Index

Access Code.................................................

Alarm............................. .............................

Area Code......................................................

Auto Answer..................................................

Base selection.................... ........................

Batteries

Charging....................... ............. .........

Installing.......................... ....................

Calculator....................... ............................

Call barring

Call transfer.......... ..................................

Calls

Changing PIN............................ ................

Character Map

Charging batteries.......................... .........

Choosing the Dial Mode................................

Clock...............................................................

Connection............

Contrast........................... ............... ......

Date & Time Setting ......

Deactivating handsets...................... ......

Deleting messages........................... .....

Dialing with phonebook................................

Display Keys..................................................

Flash

Game-Sudoku................................................

Handset and Base PIN..................................

Handset display.............................................

Handset Name...............................................

Handsets

Icons

Inbox...............................................................

Incoming calls...............................................

Installing batteries.........................................

Intercom.........................................................

Key functions.................................................

Key tone.........................................................

Keypad lock...................................................

Language........................................................

....................................................

Making..................... ........................

Muting......................................... ....

Receiving........................................ .

Sending....................................................

Setting time..............................................

Deactivating..............................................

Registering................................................

Meaning...................................................

....

...

.... ..

.....

....

.......

.........

................................................

.........................................

.................................

..........

.. ...

......

....... ...

.......

...

.........

27,28

Last dialed numbers.......................................

LDS setting.......................................................

Lists

Incoming calls list..... ............

Outgoing calls list....... ........................

Locking Keys..................... ...................

Menu map................... .............................

Messages

Writing

Out of Range Indication..................................

Outbox............................ ........................

Outgoing calls

18 19

Package Contents.... ...................................

Paging........................ .............................

Pauses..............................................................

Phonebook.......................................................

PIN change.......................................................

Redialing..........................................................

Registering handsets......................................

Reset.................................................................

Review numbers..............................................

Ring

Service centers................................................

Setting Date & Time.........................................

Sleep mode......................................................

20 46

SIM Card Reading...........................................

SMS settings

SMS Alert.........................................................

Speakerphone.................................................

Status Report...................................................

Storing Phonebook entries.............................

Technical specifications.................................

Three-way Conference Call.............................

Tone dial switchover.......................................

Troubleshooting..............................................

Turning Handset On/Off..................................

Volume..............................................................

Windows Style.................................................

Wallpaper.........................................................

........................................................

Sending

......................................................

Storing

........................................................

Sleep mode................................................

Type...........................................................

Volume.......................................................

Service centers...........................................

Sub address...............................................

.....................

.......

...........

........

..........

..................................................

....

.........

29 30

26 26 26

50 38 38

24 24

Alpha

Index

Additional

Information

Page 5

Technical Specifications

Call Transfer between Handsets

Setting Up a Three-way Conference Call

Table of

Contents

Frequency Range

Channels

RF Carrier Power

Modulation

Frequency Stability

Operation Time

Charging time

Ambient temperature

Humidity

Weight (grams)

Size (mm)

Power supply

1.92~1.93 GHz

60 duplex channels

< 240 mW (19 dBm)

GFSK

< 50 KHz

Standby: up to hours; talk time: up to hours130 15

15 hours

Normal: 15 ~ 35 , Extreme: 0 ~ 40

0%~90%

Base unit: 112; handset: 121

Handset: 123 x 46.6 x 23.8; Base: 52 x 102 x 102

Base input: 9 V , 300mA; Handset input: Ni-MH: 3 X 1.2V, 800 mA

SMS- Short Message Service

Setting Service Center Number

Status Report

Setting New SMS Alert

Writing/Sending/Storing a New Message

Using Inbox

Using Outbox

Call Lists

Incoming Calls

Reviewing/Dialing a Number in Incoming Calls List

Using Incoming Calls Options

Outgoing Calls

Phonebook

Storing Phonebook Entries

Character Map

Reviewing/Dialing a Number in Phonebook

Using Phonebook Entries Options

SIM Card Reading

Dialing a Number with LDS

Setting the LDS code

Caller ID on Call Waiting

Additional

Information

Handset & Base Setting

Selecting Ring Type & Volume

Setting Key Tone

Changing Handset & Base PIN Code

Changing Handset PIN

Changing Base PIN

Page 6

Table of

Contents

Base Selection

Resetting the Handset or the Base

Resetting the Handset

Resetting the Base

Setting Auto Answer

Setting Display

Adjusting the Display Contrast

Selecting the Wallpaper

Selecting the Windows Style

Setting a Handset name

Selecting a Language

Changing Flash Time

Setting Call Barring

Setting Area Code

Extra Setting

Alarm

Setting Sleep Mode

Game-Sudoku

Calculator

Setting Access Code

Menu Structure Map

Troubleshooting

Additional Information

Troubleshooting

Symptom

The handset doesn't switch on.

Handset works, but doesn't access the base unit.

Handset works and access the base unit, but no dial tone is heard.

Handset works perfectly, but the numbers are not dialed to the line.

Handset works perfectly, but you hear a beep during the phone calls.

Noise and audio interferences on your phone calls.

Handset works perfectly, but doesn't ring with incoming calls.

Handset can only receive calls. Keypad locked.

The phone doesn't dial certain numbers.

Phone doesn't work properly with some special services or if connected to an exchange extension (PABX).

Battery duty is very low.

Logical malfunctioning in the handset or base unit.

Cannot send and/or receive SMS messages, or SMS Messages are received just as voice messages.

Batteries discharged or not (well) installed.

Batteries damaged or not suitable.

Faulty handset.

No power connection in the base unit.

Handset not registered to the base unit or lost registration.

Wrong connection of the phone line cord.

You have set the dual tone multi frequency system (DTMF), but your line doesn't support it.

Batteries near to being fully discharged.

Handset too far from the base.

Ring volume level set to OFF.

You have the keypad lock function.

Outgoing calls barring function activated.

Flash time not properly set.

Charging contacts not clean.

Battery life reached the end.

AC power supply noise or electrostatic spikes could temporarily altered the internal memory.

Faulty handset or base unit.

Call barring is on.

Other SMS phones connected to the line.

Service cent s are not (properly) set.

Possible cause

activated

Solution

Try charging the handset for few minutes, then remove it from the base. If it still doesn't switch on, check the battery installation.

If you already did the above stated operation unsuccessfully, try replacing the batteries.

Contact an authorized service cente .

Check the connection of the AC power adapter.

Try registering the handset to the base.

Check the connection of the line cord .

Try selecting the pulse dial.

Check the battery charge and charge it if necessary.

Get closer to the base unit. If you can access more base units, try selecting a closer one.

Select another ring level.

Try by keeping pressed the key.

Check the call barring function and change it if necessary.

Check the Flash time and set it properly.

Clean them.

Replace the batteries.

Try resetting the handset or the base.

Contact an authorized service cente .

Set it to off.

Disconnect the other phones.

Set/check the SMS service cente s.

Troubleshooting

Technical Specifications

Alpha Index

Warranty

Page 7

Menu Structure Map

Feature List

Release Handset

Menu Structure Map

Flash Time

Dial Mode

PIN Change

Base Reset

Call Barring

Area Code

Review

Add entry

Read SIM

Incoming Calls

Outgoing Calls

Call Register

Base Setting

Phonebook

Sleep mode

Game-Sudoku

Access Code

LDS Code

Extra

Clock

Alarm

Calculator

SMS

H/Set Setting

Write Message

Inbox

Outbox

SMS setup

Ext Calls Ringer

Int Calls Ringer

Key Tone

PIN Code

Select Base

Handset Reset

Auto Answer

Display Setting

Language

Cordless Phone

1.9G DECT technology with GAP

1.5 inches Large LCD display with 128 x 128 dots matrix (5 lines) and 65K color

Phonebook with up to 250 entries Outgoing calls list with up to 20 entries Up to 5 handsets for optional for one base Up to 4 bases for optional for one handset 12 Polyphonic and 3 monophonic ringtones 4 ringer volume levels selectable Three-way conference call Call transfer Vip ringer Voice volume adjustable (5 levels) 7 languages selectable LCD contrast adjustable (11 levels) Flash time selectable Key tone ON/OFF selectable Auto answer ON/OFF selectable

10 Wallpapers selectable

8 Window Styles selectable Dialing mode selectable PABX Access code setting Area & LDS code setting Handset Name setting Talking time display Internal call PIN protection Call barring Handsfree Mute function Real clock Keypad lock Redial, Flash, Pause Preparation dialing Sleep mode selection Alarm

General

Page 8

Caller ID and SMS

General

Calculator Game-Sudoku Illuminated keypad SIM card reader

FSK / DTMF Caller ID TYPE1/2 Caller ID Incoming calls list with up to 30 entries Call back/Add to phonebook/Delete New incoming call indicator Private/Out of area SMS ETSI protocol 1 Sending/receiving SMS (up to 160 characters) Up to 40 Incoming SMS Up to 5 Outgoing and draft SMS New incoming SMS indicator Subaddressing support Message waiting Status Report Reply/Forward/Call back/Add to Phonebook/Delete

Setting Access Code

Some telephone systems, such as PABX (Private Automatic Branch of eXchange) or KTS (Key Telephone Systems), require an access code (e.g. 9 or 0) to access an external line and listen for the outside dial tone before dialing the outside number. You can set your phone in order to automatically insert one-digit access code when you use a phone number from the received calls list. For details about the received calls list, see the '".Incoming calls

Press key to display the main menu items.MENU

Extra

Press repeatedly the key to choose , then press the

Press the or key to choose , then press the

SELECT

Use the or key to select the access code from 0 to 9.Left Right

Press the key to save the setting.SELECT

key.SELECT

Up Down Access Code

key.

Extra Setting

Page 9

Calculator

The Unit Layout

Using this feature, you can use the phone as a calculator. You can perform calculations including addition, subtraction, multiplication and division on your phone.

Press key to display the main menu items.MENU

Extra

Press repeatedly the key to choose , then press the

Press the or key to choose , then press the

SELECT

Enter the first number (operand) using the numeric keys.

To select the operation for four calculation, press the or

key.SELECT

Up Down Calculator

key.

keys to choose the required arithmetic symbol appears:

+(addition), -(subtraction), *(multiplication), /(division.)

Enter the second number (second operand) using the numeric keys.

To get the result, press the key.SELECT

Extra Setting

Notes

To erase any mistake and clear the display, press the key.

To insert a decimal point, press key or use the or key to select the " " symbol.

CLEAR

Left Right .

Left Right

Handset

Earpiece

Navigation keys

Left soft key

Charge pins

Base

Charging slot

Hand strap

LCD Screen (1.5 inches)

Right soft key

Microphone

Phone Line

socket

hole

SIM card latch

TEL.LINE

Earpiece Terminal

Loudspeaker

Battery compartment cover

SIM card cover

Routing groove

General

Charging LED

Paging key

Antenna

Power socket

851

Page 10

Key Functions

Setting Sleep Mode

General

To enter # or switch between upper case and lower case in English mode.

Press and hold to turn on/off keypad lock function.

Perform the functions indicated by the text immediately over them (on the bottom line of the display) which changes time by time.

Press to turn the phone on. If held pressed, turns the phone off. In menu mode, briefly press it to cancel your input and return to standby mode. During a call, briefly press it to end the call.

Makes telephone calls and answers them. If pressed during a call, activates the speakerphone for handsfree operation.

To locate the registered handset easily or register a new handset.

To scroll up/down when browsing selections. To move the cursor to left/right when editing a record and use the

key to delete the wrong digits or characters.

Left

In standby mode:

Left: One-touch for internal call. Right: One-touch for incoming call list. Up: One-touch for outgoing call list. Down: One-touch for Phonebook.

In use mode:

Left: One-touch for internal call. Right: Mute/Unmute the microphone. Up: Increase receiver volume. Down: Decrease receiver volume.

This feature allows you to not be disturbed by the ring sound at night. If the sleep mode is activated, the ring volume automatically switches to minimum volume level during time from 23:00 to 6:59.

Press key to display the main menu items.MENU

Press repeatedly the key to choose , then press the

Press the or key to choose .Up Down Sleep mode

Press the key to turn on this feature You can see the

icon appears at the right of the item.

Notes

In Standby mode, the icon will appear at the right of the date if you have activated the feature.

key.SELECT

SELECT

Sleep mode

Extra

Game-Sudoku

There is a game for you playing in the leisure time. The game's instruction: You should input digits (1 to 9) in the empty grids one at a time in order to fill in the whole layout, but it does not allow to input the same digit in one row or one line.

Extra Setting

Press key to display the main menu items.MENU

Extra

Press repeatedly the key to choose , then press the

Press the or key to choose , then press

the key to start playing.

Notes

During playing the game, press key for help, and press the key again to return to the game. Press the right soft key to change the layout.

key.SELECT

Up Down Game-Sudoku

SELECT

9 50

Page 11

Alarm

This option allows you to set one alarm that can ring once.

Activating the Alarm Feature

Press key to display the main menu items.MENU

Press repeatedly the key to choose , then press the

Press the or key to choose , then press the

SELECT

You are now on the time field. Set the time with hh:mm format by

using the numeric keys.

Press the key to save the alarm time setting and enter the

alarm ring type setting.

Press the or key to select the ring type for the alarm.Left Right

key.SELECT

Up Down Alarm

key.

SELECT

Extra

Display keys

In different mode, press left and right buttons to initiate the corresponding functions shown on the LCD display.

MENULIST

Left:

LIST

CANCEL

CLEAR

PAUSE

REDIAL

CANCEL

CLEAR

PAUSE

REDIAL

To access the Incoming Calls list or the Outgoing Calls list.

To cancel settings and go to the previous menu.

To clear digits or characters when you store phone numbers or write messages.

To insert a pause during dialing a number.

To redial the last outgoing number

Right:

SELECT

SAVE

FLASH

General

Press the key to save the setting and exit to the previous

menu. You can see the icon appears at the right of the item.

When the alarm sounds, press any key to switch it off.

SELECT

Extra Setting

Deactivating the Alarm Feature

Perform steps 1 to 3 of the last paragraph. Then the icon will

disappear.

Notes

At step 3 you need to enter the hour in 24-hour format.

In Standby mode, the icon will appear at the left of the time if you have activated the feature.

Alarm

SELECT

SAVE

FLASH

To confirm.

In standby mode, to save numbers to Phonebook.

To switch between 2 callers (call waiting) or get a new dial tone for another call.

To answer a call.

To enter main menu. The LCD display shows as below:

SMS

CANCEL

SELECT

1049

Page 12

Handset Display

Setting the Area Code

Information on the LCD display:

When the phone is in different mode, the LCD display shows different icons.

Shows the current signal strength. The greater the number of bars, the stronger the signal.

General

Indicates the line is engaged.

A yellow envelope indicates you have one or more text messages. A red envelope indicates you have one or more voice messages.

When this icon appears, it means that the character will be entered in lower case.

When this icon appears, it means that the character will be entered in upper case.

When this icon appears, it means that you can only enter digits.

Indicates battery charge level.

Fully charged status shown Low battery

Low battery warning

In standby mode, this icon will appear at the right of the date if you have activated sleep mode.

This icon appears when you set an alarm to ring at a specified time.

Indicates the microphone is temporarily muted during a conversation.

In some countries, if you have to call somebody living in your city area (phone district) you don't have to dial the related area code. With this feature you can set up your area code in order to avoid its dialing every time you call back somebody using a number from incoming calls list.

Press soft key to display the main menu items.MENU

Base Setting

Press the navigation keys to choose , then press the

The handset asks you to enter the current base PIN code (the

default PIN is ). Use the numeric keys to enter and press

SELECT

Press the or key to choose , then press the

SELECT

Enter your area code (up to 4 digits) and press the soft key.SELECT

Notes

This function is useful only if in your country you don't have to dial your area code when you call a phone number in the same area. If not, please leave this function disabled.

soft key.SELECT

1590

soft key.

Up Down Area Code

soft key.

Handset & Base Setting

Indicates the handsfree function is enabled.

Indicates you have missed one or more calls, and it will disappear until you view the detail of the missed calls.

The icon appears when lock the keypad.

Page 13

Setting Call Barring

Package Contents

You can set the phone to restrict numbers that can be dialed. Calls beginning with the numbers you specify using this menu can not be dialed. You can set up to 5 different restricted numbers containing up to 5 digits each.

Press key to display the main menu items.MENU

Base Setting

Press the navigation keys to choose , then press the

Handset & Base Setting

The handset asks you to enter the current base PIN code (the

default PIN is ). Use the numeric keys to enter and press

SELECT

Press the key to access , then press the

SELECT

Press the or key to choose the barring memory location.Left Right

Enter the number you want to restrict (up to 5 digits) and then press

the key.SELECT

Enter your desired handset number which you want to restrict the

stored barring number. Then press the key to save the setting.

key.SELECT

1590

key.

SELECT Call Barring

key.

SELECT

Once you have unpacked your phone, make sure that you have all the parts shown below are available. If any piece is missing or broken, please promptly call your dealer.

Base Handset

User's manual

*The shape of the plug can vary according to each country's specification.s

Power adapter* Line cord*

3 x AAA Ni-MH Rechargeable batteries

Connection

Connect one end of the phone line cord to the phone line socket on the

1. bottom of the base, and the other end to a standard phone wall outlet.

Getting Started

TEL.LINE

C D

Tophone wall outlet

ToAC wall outlet

Connect the modular end of the power adapter to the power socket of the base, then plug the AC adapter into standard AC wall outlet.

Route the cord through the routing groove as show.

Page 14

Installing the Batteries

Three chargeable AAA Ni-MH batteries come with your phone. Install the batteries before using your phone.

Slide the battery cover in the direction of the arrow and remove it.

Insert new batteries as indicated, matching correct polarity (+, -).

To replace the battery cover, slide the cover up until it snaps in place.

Getting Started

Press the navigation keys to choose , then press the

Press the or key to choose , then press the

SELECT

Press the navigation keys to select the language you want,

then press the key.SELECT

key.SELECT

Up Down Language

key. The current language appears on the display.

H/Set Setting

Changing Flash Time

Notes

The batteries need to be replaced if they don't recover their full storage capacity after recharging.

When replacing the batteries, always use some good quality Ni-MH rechargeable batteries. Never use other battery types especially conventional alkaline batteries.

Reversing the orientation may damage the handset.

Charging the Handset Batteries

Before initial operation, you should fully charge the handset's batteries for 15 hours or more.

To charge the handset, simply place it on the base, you will hear a confirmation beep (charging beep).

Notes

When charging, the icon on the display will scroll.

During a conversation, the key allows you to access the special services offered by the telephone network or transfer a call to another extension when you are connected to a PABX (Private Automatic Branch of eXchange). If your key does not work properly, you need to adjust the Flash

FLASH

time as follows:

Press key to display the main menu items.MENU

Press the navigation keys to choose , then press the

The handset asks you to enter the current base PIN code (the

default PIN is ). Use the numeric keys to enter and press

SELECT

Press the key to access , then press the

SELECT

Press the or key to choose the desired flash time, then

press the key. You can choose from 100ms,120ms, 300ms or 600ms.

Notes

We recommend to contact your service provider or refer to your PABX user's manual in order to know the proper flash time to use with your telephone network.

key.SELECT

key.

SELECT Flash Time

key. The display shows the current setting.

Left Right

SELECT

FLASH

Base Setting

1590

Handset & Base Setting

Page 15

Selecting the Windows Style

Turning Handset On/Off

Perform steps 1 to 3 of paragraph "Adjusting the Display contrast".

Press the or key to choose . The current

setting appears on the display.

Press the navigation keys to choose among 8 pre-defined

color styles, then press the key.SELECT

Setting a Handset name

Perform steps 1 to 3 of paragraph "Adjusting the Display contrast".

Press the or key to choose , then press

the key.

SELECT

At this time, enter the name, up to 15 characters long, you want to

assign to the handset and then press the key. You will see the icon at the right side of the item.

Press the key to return to Standby mode. You will see the result

Handset & Base Setting

of your settings (name of the handset instead of the number of the base followed by the number of the handset.)

To deactivate this feature, press the key again when the

LCD display shows the icon at the right side of the item.

Up Down Windows Style

Up Down Handset Name

SELECT

Handset Name

SELECT

Handset Name

When you place the handset on the base, it automatically turns on.

To turn the handset on the display on.

To turn the handset off Goodbye! message appears. Then the display turns off.

Notes

Nothing will appear on the display when the battery power is very low. You should fully charge the handset before using it.

(when it's off), press the button then you switch

, keep the button pressed until " "

Registering a New Handset

You can register to your base additional handsets (up to 5 in total) in order to share the same line with other people. To do that you should assign a number to each new handset you will register. As you know, the supplied handsets are already registered with the number 1 and 2, in fact they show

HS(1) HS(2)

and . For security reasons, the registration procedure can be done only by people who are nearby your base and know the PIN which acts as phone's authentication code.

Press and hold the button on the base unit for about 3 seconds,

then release the button.

base

Getting Started

Selecting a Language

You can change the language used to display the menu messages. There are 7 different languages: English, , and Russian.

Press key to display the main menu items.MENU

Greek, Spanish, French, German, Dutch

Press key to display the main menu items.MENU

Press the navigation keys repeatedly to choose , then

press the key.SELECT

Press the or key to choose , then press

the key.

Up Down Register H/Set

SELECT

H/Set Setting

Page 16

Press the or key to choose the base number you want.

Press the key in order to search the base. The display shows " ".

Press key to confirm, then the display asks you to enter

the AC (the authentication code is ). Enter this code and press the key.

Up Down

SELECT

Searching:

SELECT

1590

SELECT

Setting Display

Using this feature, you can customize the standby display according to your taste and needs (wallpaper and color).

Adjusting the Display Contrast

If the registration has performed successfully, the new handset will

show the phone and base numbers (e.g. ) and returns to Standby mode.

HS(2) BS(1)

Getting Started

Notes

A handset can be registered to up to 4 different base units in order to extend the radio coverage. A base can be used with up to 5 handsets in total. Obviously the base can be accessed by one handset a time (because a base is connected to one line).

Deactivating a Handset

If necessary, you can clear the registration of a registered handset in order to stop its access to one or more base units, but you can not deactivate the handset you are using. Just follow these steps:

Press key to display the main menu items.MENU

Press the navigation keys repeatedly to choose , then

press the key. Enter the current base PIN (preset to )

and press the key.

Press the or key to choose , then press

the key. Press the numeric key related to the handset number you want to clear the registration, then press the key. The display of the handset which you have cleared the registration shows " " and it cannot be used anymore with the base.

SELECT 1590

SELECT

Up Down Release Handset

SELECT

NOT SUB

Base Setting

SELECT

This adjustment will allow you to optimize the visibility of the display by changing its contrast according to the environment conditions.

Press key to display the main menu items.MENU

H/Set Setting

Press the navigation keys repeatedly to choose , then

press the key.SELECT

Press the or key to choose , then press

the key.

Press the key to access . The current setting

appears on the display.

Press the navigation keys repeatedly to choose among the 11

available contrast levels, then press the key.SELECT

Up Down Display Setting

SELECT

SELECT Contrast

Selecting the Wallpaper

Perform steps 1 to 3 of previous paragraph.

Press the or key to choose , then press the

SELECT

Press the navigation keys to choose among 10 pre-defined

wallpaper images, then press the key.SELECT

Up Down Wallpaper

key. The current setting appears on the display.

Handset & Base Setting

Page 17

Press the or key to choose .Up Down Base Reset

Choosing the Dial Mode

The display shows " ", press the key to confirm.B Reset ? SELECT

Press the key to exit.

Notes

Be careful! When you reset the handset you will lose any date stored in it (e.g. name and numbers in phonebook). Don't forget to note them down before resetting the handset.

Resetting the base does not affect the handsets registered to the base.

Setting Auto Answer

With this feature, you can answer a call by just picking up the handset from the base without pressing any key.

Press key to display the main menu items.MENU

Handset & Base Setting

H/Set Setting

Press the navigation keys to choose , then press the

Press the or key to choose , then press the

SELECT

the right of the item.

Press again the key to deactivate the function, and the

icon will disappear.

key.SELECT

Up Down Auto Answer

key to activate the feature, and the icon will appear at

Auto Answer

SELECT

In order to provide compatibility with other telephone systems, your phone can be set to either pulse dialing (rotary), or tone dialing (DTMF). To change the dialing mode:

Press key to display the main menu items.MENU

Base Setting

Press the navigation keys repeatedly to choose , then

press the key. Enter the current base PIN(preset to ) and press the key.

Press the or key to choose , then press the

SELECT

Press the or key to choose or , then press

the key to save the selection.

SELECT 1590

SELECT

Up Down Dial Mode

key. The current setting appears.

Left Right DTMF PULSE

SELECT

Setting Date & Time

In Standby mode, the unit can show the current date and time to help you keep your appointments. You need to set the date and time so that the date and time when messages or calls are received can be displayed correctly.

Press key to display the main menu items.MENU

Extra

Press the navigation keys repeatedly to choose , then

press the key.SELECT

Getting Started

Press the key to choose . The current settings are

displayed: the time on the upper line in the Hours:Minutes format and the date in the Month-Day format in the lower line.

SELECT Clock

Page 18

Getting Started

Enter the current date and time using the number keypad (4 digits

for each as explained below in the notes).

Press the key to save the setting.SELECT

Notes

The time setting must be entered in 24h format, but it displayed in 12h format.

When setting the month, you can enter 1 digit or 2 digits at a time, but it is displayed in English for short. (For example: To August, you can enter 8 or 08 in the month field, but the display shows "AUG".)

In the state of FSK standard, the date and time will be automatically set when you receive a call to this unit.

Resetting the Handset or the Base

If you reset the handset or the base, all the user selectable features restore to the factory preset initial settings: all the numbers in phonebook will be erased, as well as the incoming/outgoing call lists etc. But the following are not reset: Flash time, Key tone, Handset PIN, contrast, Window style, Language, SMS send number and SMS receive number. You can reset the handset without resetting the base or vice versa, it depends on the scope you have. It is mainly useful for these purposes:

If you have made many wrong settings and you want to restore the handset to the factory preset initial settings.

If the phone shows logical malfunctions (not correct symbols on the display, incorrect behavior etc.), the problem can be caused by an AC power supply noise or an electrostatic spike which can temporarily alter the memory of the internal microprocessor. In this case the reset could solve the problem.

Resetting the Handset

Press key to display the main menu items.MENU

H/Set Setting

Press the navigation keys to choose , then press the

Press the or key to choose .Up Down Handset Reset

key.SELECT

The handset asks you to enter the current handset PIN code (the

default PIN is ). Use the numeric keys to enter and press

SELECT Reset ? SELECT

key to confirm.

Press the key to exit.

1590

key, then the display shows " ", press the

Resetting the Base

Press key to display the main menu items.MENU

Base Setting

Press the navigation keys to choose , then press the

The handset asks you to enter the current base PIN code (the

default PIN is ). Use the numeric keys to enter and press

SELECT

key.SELECT

1590

key.

17 42

Handset & Base Setting

Page 19

The handset asks you to enter the current base PIN code (the

default PIN is ). Use the numeric keys to enter and press

SELECT

Press the or key to choose , then press the

SELECT

Enter the new four-digits PIN you want to use, and press the

1590

key.

Up Down PIN Change

key.

key.SELECT

Making a Call

You can dial numbers up to 25 digits which are shown in the display. If the number is longer than the display's width, the display automatically switches a smaller font in order to accommodate the whole number. You can make your calls in two ways.

Traditional mode

Enter the new PIN code again to confirm it, then press the

key to save the setting.

Base Selection

Your handset can be used with up to 4 base units, provided that it has been previously registered with them. This menu option allows you to select the base you want to use:

Press key to display the main menu items.MENU

H/Set Setting

Handset & Base Setting

Press the navigation keys to choose , then press the

Press the or key to choose , then press the

SELECT

Press the or key to select the base you want, then press

the key.

Press the key to return to Standby mode.

Notes

The icon will appear at the right of the selected base.

If the selected base has not been registered with your handset, the display will show " " (x is the base number 1~4).

At step 4 you can select " ". In this case the handset will automatically find the first available unit when you lose contact while moving around.

key.SELECT

Up Down Select Base

key.

Up Down

SELECT

NOT SUB x

Best Base

SELECT

Pick up the handset and press the key to engage the line. You

hear a dial tone, the icon appears in the icon area.

Dial a telephone number. The display shows the number as you

have entered it. When you hear your called party, speak with a normal voice.

To end the call, press the key or replace the handset on the

base.

High featured mode

This procedure is more convenient and reliable, because you can check the number you have entered and eventually make corrections before dialing:

Enter a telephone number. Check the number on the display.

If you have made mistakes (i.e. the number you dialled is not the

one you wanted to call) modify it by using the key.Left

When the number correctly appears, press the key to dial it out.

Basic Functions

Page 20

Receiving a Call

Changing Handset & Base PIN

When a call is received, the phone rings and the display shows "

". If the incoming call can be identified (i.e. caller's information is

Call

transmitted from the network on which the call was made and the caller doesn't hide it) you will also see the caller's number in the display.

Answer the call handset open. Or if the handset is on the base and you have activated the " " function (See page 43 for details), simply pick it up to

Auto Answer

answer the call, you don't need to press any key and slide the handset open. During the conversation, the display shows the elapsed time.

To end the call, press the key or replace the handset on the base or just slide closed.

Basic Functions

Notes

The caller's identification can work only if your telephone network supports the service as well as the caller's one. However the caller can still hide his/her number.

, by pressing the key or the key or slide the

ACCPET

Adjusting Voice Volume

During a conversation, press the or key to adjust the level of the earpiece volume (or the handsfree speakerphone one, if activated). You can adjust the volume in five levels which are showed by the bars of the icon . The more bars filled blue, the louder the volume. When the last bar is filled red, this means the voice volume reach the maximal level.

Up Down

Incoming

Base and handset PIN's are required to protect your phone against unauthorized use. There are set to at the factory. You can change the PIN's as follows:

1590

Changing Handset PIN

Press key to display the main menu items.MENU

H/Set Setting

Press the navigation keys to choose , then press the

Press the or key to choose , then press the

SELECT

Enter the current PIN code, then press the key.SELECT

Enter the new four-digits PIN you want to use, and press the

Enter the new PIN code again to confirm it, then press the

key to save the setting.

Notes

At step 4, if you enter the wrong PIN, your phone will generate a warning sound.

key.SELECT

Up Down PIN Code

key.

key.SELECT

SELECT

Handset & Base Setting

Muting a Call

During a conversation, you can temporarily mute the microphone so that the party on the other end of the line cannot hear you. During the period you can still hear the him/her. This mode allows you to have a conversation with someone near you and avoid that the party at the phone is hearing what you are saying.

To mute you microphone the icon will appear on the display.

To unmute the microphone disappear and you will restore the normal condition.

, just press the key during the conversation:

, just press again the key: the icon will

Right

19 40

Changing Base PIN

Press key to display the main menu items.MENU

Press the navigation keys to choose , then press the

key.SELECT

Base Setting

Page 21

Setting Key Tone

Using Speakerphone

Every time you press a key, your handset acknowledges it with a key tone. You can disable the key tones for a silent use.

Press key to display the main menu items.MENU

H/Set Setting

Press the navigation keys to choose , then press the

Handset & Base Setting

Press the or key to choose .Up Down Key Tone

Press the key to activate the function, the icon will

appear at the right of the item.

Press again the key to deactivate the function, and the

icon will disappear.

Notes

For a normal use, we recommend to leave the key tone enabled: they make the use of the phone easier.

key.SELECT

SELECT

Key Tone

SELECT

During a call, you may turn on the speakerphone built in the handset. In this mode you can simply put your handset on a surface (e.g. a desk) and enjoy the comfort of the handsfree conversation. To turn the speakerphone on The icon appears on the display.

To turn the speakerphone off again the key. The icon will disappear.

, press the key during a call (line engaged).

, and keep on talking in normal mode, press

Redialing Last Dialed Number

You phone allows you to quickly call again the last dialed number.

Pick up the handset and press the key to engage the line. Then press the key to dial out the last dialed number.REDIAL

Flash Signal

When the line is engaged, the key sends the Flash signal. This key is used in conjunction with special services (e.g. call waiting, conference etc.) which can be available in your phone network. For further details please contact your network telephone company. Moreover, if you are connected to an extension of a switchboard (PABX), you can use the key to locally transfer a call to another extension.

To transfer a call, or use the said special services, just press the key while the line is engaged.

FLASH

Basic Functions

Using a Pause

A pause is useful when you access an interactive voice response system, such as an automated banking system. A pause provides a delay of 3 seconds. When you are dialing a number in Standby mode and need to insert a pause, please press the key one time.PAUSE

Page 22

Out of Range Indication

Selecting Ring Type & Volume

The bars at the right of the icon continuously show the signal strength received from the base. If you are too far from the base, the radio signal might become too weak and the phone might not access the telephone line. In these conditions you can't make or receive phone calls, for this reason, the icon turns to red.

Locking the KeypadHandset

This function is useful to avoid unwanted function activations by accidentally pressing any keys when you are carrying your handset. If you activate the key lock, the keys are inhibited, except for the key.

Basic Functions

If you switch the handset off and on again, the key lock is automatically disabled.

In this condition, when a call comes in, you can answer the call by pressing

the key. When the call ends, the keys will be locked again.

To lock the keys display shows the key lock icon .

To unlock the keys disappears from the display.

, in the Standby mode just keep the key pressed till the

, keep the key pressed again till the key lock icon

Paging

You can page the handset from the base unit making it ringing with a special ring. It's useful to locate a lost handset or call the user who currently has the handset.

To send the paging signal base. All the phones registered with the base ring for 15 seconds.

, briefly press the Paging key located on the

You can select your own external and internal ring sound and adjust the volume. There are 12 polyphonic and 3 monophonic ringtones, and 4 volume levels for choosing. You can also adjust the volume " " to turn off the ringer.

Press key to display the main menu items.MENU

H/Set Setting

Press the navigation keys to choose , then press the

Press the key to choose , or press the

Down Int Calls Ringer SELECT

Press the or key to select the ring tone you like. Each

time you press the or key, the handset sounds with the selected ring.

Press the key to save the ring tone setting and enter the

ring volume setting.

Press the or key to choose the volume level you want.

Each time you press the or key, the handset sounds with the selected loudness.

Press the key to save the setting and return to the

previous menu.

Notes

Setting the volume " " turns the ringer off. When a call comes in, only the incoming call message appears on the display.

key.SELECT

SELECT Ext Calls Ringer

key to choose , then press the key.

Left Right

SELECT

Left Right

SELECT

Handset & Base Setting

To stop the paging signal before 15 seconds are passed key again or any keys on the handset.

Notes

If a call comes in while the handset is being paged, the handset stops the paging operation and starts ringing normally in order to allow you to answer the call.

, press the Paging

Page 23

Setting the LDS Code

Temporary Tone Dial Switchover

With th s feature you can set up the LDS code ( / / ) in order to avoid dialing it every time you call back a long distance call from the incoming calls list. Your phone will dial the LDS code first automatically before dialing the caller's number which exceeds 8 digits.

Press soft key to display the main menu items.MENU

Press repeatedly the key to choose , then press the

Press the or key to choose , then press the

SELECT

Press repeatedly the key to choose the desired type, then

press the soft key. You can select , or .SELECT 0 1 OFF

soft key.SELECT

Up Down LDS Code

soft key. The display shows the current setting.

0 1 OFFi

Call Register

Call Lists

Caller ID on Call Waiting

When you have subscribed to call waiting service from your local company, this telephone will indicate the name and number of the second caller while you are having a conversation with the first caller.

Press the key to answer the second caller. When you want to transfer to the first call, press the key again to continue your conversation with the first caller.

FLASH

If you are using the pulse dialing because your telephone line doesn't support tone dialing, you might not be able to access certain external services (e.g. automatic call centers, voice mailboxes, interactive telephone systems etc.), because they need the tone dialing. You can avoid this limitation and access them anyway doing this:

Pick up the handset and press the key to engage the line.

Press and hold the key until " " is displayed: your phone is

temporarily to the tone dial mode.

Enter the number of the service you need to access as you do

normally.

When you hang up, the phone automatically returns to the pulse

4444

mode.

Intercom

If you connected more than one handset to a base (you can connect up to 5 handsets to the same base), you can have a conversation between two people using two different handsets.

Pick up the handset and press the key, the display shows

"".

INT->

Press the number of the handset you want to contact (from 1 to 5).

Then the called handset starts to ring.

Left

Basic Functions

If the called party can answer your call, he/she can press the key

and start talking. You can see the number of the handset of your called party and the icon in your LCD display.

At the end of the conversation press the key to return to Standby

4444

mode.

Page 24

Call Transfer between Handsets

If you have more handsets registered to the same base, you can transfer an outside call between the registered handsets.

When you are connected to an external call, press the key and

the number of the handset you want to contact

If the called party can answer your call, he/she can press the key

and start talking.

(from 1 to 5).

Left

If the SIM card is protected with a PIN, the display will ask you to

enter it with the message " ". Enter the PIN, then press the

SELECT

PIN ERROR

"".

The display will show " " and then show the copy

progress in percentage, but the progress will pause on the last entry, and then the display will show " ". When finished, you can see " " in the display and hear a confirmation beep.

Remove the SIM card and replace it into your phone.

key. If you enter an incorrect PIN, the display will show

FINISHED

SIM PIN:

Checking SIM...

Verifying

If you want to transfer back the incoming call before the called party

answer, just press the key of your handset. The call will be transferred back.

Left

Basic Functions

Setting Up a Three-way Conference Call

When you have both an external call and an intercom call in progress, you can set up a three-way conference call, like this:

Press and hold key of the your handset for more than 2 seconds to set up a three-way conference call.

Replace the SIM card slot cover by fitting its two small tabs into the

two slots of the base slot and gently push the cover toward the base till it snaps into its original place.

Reconnect the telephone line.

Notes

Even if the SIM card is placed in the base, the phonebook contents are transferred in the handset's memory (not in the base), so the base acts only as a wireless SIM card reader.

The numbers contained in the SIM phonebook are copied into the handset one and added to the entries already stored in it which are not overwritten. The maximum number of entries is 250. If your handset phonebook already contains 200 entries, only the first 50 entries on the SIM card will be copied.

This function will only copy numbers stored in your SIM card. Check that all numbers you intend to copy are really stored on your SIM and not in your mobile phone's memory. Refer to your mobile phone user guide for instructions on how to do this.

The SIM card copy is not guaranteed with all the types of SIM cards.

If the phonebook becomes full during the transfer, the display will show

, and then exit.

Full

If the SIM card can't be read, the display shows .

NO SIM

Call Lists

Memory

23 36

Page 25

Call Back a Number with LDS from Incoming Calls List

Setting Service Cent Numberer

Find your desired number that you want to call back, then press the

Press the soft key to display the option menus.SELECT

Press the or key to choose .Up Down Dial with LDS

Press the soft key to dial it with LDS. You can see that the

LDS is added before the selected entry automatically.

soft key to view the details of the entry.SELECT

SELECT

SIM Card Reading

With this feature you can copy the contents of your mobile phone's SIM card phonebook into the phonebook of your DECT cordless phone.

Call Lists

Disconnect the telephone line (for security reasons as below stated).

Open the SIM card slot cover in the bottom of the base by moving

downward the SIM card latch, then remove the cover and keep it.

Remove the SIM card from your cellular phone by following the

instructions stated in its user's manual.

Carefully slide the SIM card inside the base slot keeping the

smoothed corner on bottom left and the golden contacts toward the slot ones. Make sure that the SIM card slides under the guides on either side of the reader.

To enable the SMS feature you should ask your service supplier the service center numbers and store it in your phone as below:

Press key to display the main menu items.MENU

SMS

Press the key to choose .SELECT

Press the or key to choose , then press the

SELECT

Press the key to choose the .SELECT Service Center

Press the or key to choose the ,

Receiving-2 For Sending SELECT

If you choose the , enter the service number using the

numeric keys, then press the key. You can enter up to 16 digits. If you choose the or , after entering the service number (up to 16 digits), the display shows

Subaddress: 0~9

" ", then enter the subaddress number ( ). Press

SELECT

To return to the standby mode, press the key.

Notes

At step 6, if you make a mistake while entering a number, use the or key to move on the wrong digit, then press the key to clear it.

Up Down SMS setup

key.

Up Down For Receiving-1 For

or . Then press the key.

For Sending

For Receiving-1 For Receiving-2

key to save the setting.

SELECT

CLEAR

Left Right

SMS - Short Message Service

Press the key in standby mode, then press repeatedly the

the phonebook.

Press the to choose , and press the

SELECT

keys to choose and press the key to access

Up Downor key

key.

Phonebook

SELECT

Read SIM

Status Report

If you have activated this feature, after sending a message, you will receive a confirmation message from your SMS service supplier.

Page 26

Press key to display the main menu items.MENU

Press the key to choose .SELECT

Using Phonebook Entries Options

SMS

You can edit, delete or dial a number with LDS in the Phonebook as follows:

SMS - Short Message Service

Press the or key to choose , then press the

SELECT

Press the or key to choose the .Up Down Status Report

Press the key to activate the feature, and the icon will

appear at the right of the item.Status Report

To deactivate, press the key again, then the icon will

disappear.

To return to the standby mode, press the key.

Notes

The status report will store in the , you can access the under the

menu in order to read the report.

SMS

Up Down SMS setup

key.

SELECT

Inbox Inbox

Setting New SMS Alert

If you have activated this feature, when you receive a message, your phone will generate a new SMS alert tone.

Perform steps 1 to 3 of previous paragraph.

Press the or key to choose the .Up Down New SMS Alert

Press the key to activate the feature, and the icon will

appear at the right of the item.

To deactivate, press the key again, then the icon will

disappear.

To return to the standby mode, press the key.

SELECT

New SMS Alert

SELECT

Find the desired number in the phonebook.

Press the key to view the details of the selected entry.SELECT

Press the key to display the option menus.SELECT

Press the or key to choose the desired option:

Up Down

Edit

allows you to edit the number in the phonebook.

Delete

Delete All Dial with LDS

1 before the phone number by your phone automatically. For detail, see "".Dialing a Number with LDS

deletes the selected phonebook entry.

deletes all the phonebook entries.

allows you to dial the selected call with being added LDS

Dialing a Number with LDS

With this feature, you can dial a number from the phonebook or incoming calls list in order to avoid the LDS's dialing every time. The LDS was preset to at factory.1

Dialing a Number with LDS from Phonebook

Find the phonebook entry that you want to dial, then press the

Press the soft key to display the option menus.SELECT

Press the or key to choose .Up Down Dial with LDS

Press the soft key to dial it with LDS. You can see that the

LDS is added before the selected entry automatically.

soft key to view the details of the entry.SELECT

SELECT

Call Lists

Page 27

Review/Dialing a Number in Phonebook

You can search the entries stored in the phonebook by entering the first initial characters of their names (alphabetic search). You can also scroll through the whole list of the phonebook entries in Standby mode without accessing the menu.Phonebook

Way 1: Alphabetic search

Press key to display the main menu items.MENU

Phonebook

Press repeatedly the key to choose , then press the

Press the key to access .SELECT Review

Enter the first few letters of the name by using the alphanumeric

keys, and press the key. You can view the details of the selected entry.

Press the key to dial it.

353

Call Lists

Way 2: Searching by scrolling the phonebook list

Press the key in Standby mode. The display shows the whole

list of all of the Phonebook entries in alphabetical order.

Repeatedly press the or key to scroll to the desired entry.Up Down

Press the key to view the details of the selected entry.SELECT

Press the key to dial it.

key.SELECT

SELECT

Down

Writing/Sending/Storing a New Message

You can create a text message containing up to 160 alphanumeric characters and send it as a SMS message. Opening the SMS input filed:

Press key to display the main menu items.MENU

SMS

Press the key to access .SELECT

Press the key to access .SELECT Write Message

Enter the message text (up to 160 characters) by using the

alphanumeric keys, then press the key to choose:

Send

sends the message immediately to the desired destination.

Store

stores the message in the folder without sending it.Outbox

If you previously selected , enter the phone number to whom

you want to send the message by using the keypad, or press the

Down

key to enter the phonebook to choose a desired contact. Then press the key to send. When the message is being sent, the display shows "

Sending... SMS Sent Try Again

to the sending result.

Notes

At step 4, to shift the case, press the key while entering text.

If you have an incoming call while creating a message, your phone will close the text input filed and show the incoming call number automatically.

In some countries, you can send SMS messages to fixed line phones even if they are not fitted with SMS capability. If your network operator fitted the line with the SMS-to-voice conversion, the messages are delivered and "read" to the addressee ad voice mail. Please contact your network operator for more details.

SELECT

", and then shows " " or " " according

SELECT

Send

SMS

SMS - Short Message Service

Page 28

Using Inbox

While a message is being received, the display shows " ". Then, if the message is received properly, the display shows "

Message

Your phone stores up to 40 messages recently received in the Inbox. You can receive messages of 160 characters long. When you access under the menu, you can read and edit the received messages.

" and the yellow icon until you read the message.

SMS

Press key to display the main menu items.MENU

SMS

Press the key to access .SELECT

SMS Receiving

New

Inbox

Way 2: in Standby mode

Enter a phone number in Standby mode, then press the key.SAVE

Complete storing the entry by starting from step 4 described in the

last paragraph of .Way 1

Notes

When you are entering the number in step 1, you can also insert one or more dialing pauses in order to store them in the phonebook as well.

SMS - Short Message Service

Press the or key to choose , then press the

SELECT

time in which the message was sent and the first part of the message.

Select a message that you want to read by using the key,

and press the key. The display will show the whole message.

You can access the following options by pressing the key:

Delete Reply Forward Call Back Add to Phonebook Delete All

To return to the pervious menu, press the key.

353

To return to the standby mode, press the key.

Notes

At step 2, the numbers to the right of each line show the number of related messages. Those for show the number of new messages and the total number of messages. If the total number is up to 40, then the display will show " " in the standby mode.

Inbox Full

If you have a voice mail service from your telephone company and a recorded message is left, the display shows " " and the red icon until you retrieve the voice mail from your telephone company.

Up Down Inbox

key. The display shows the sender's phone number, the

SELECT

deletes the selected message.

replies by sending your reply message.

sends the received message to other person.

allows you to call the sender back.

deletes all the received messages.

saves the sender's number in your phonebook.

CANCEL

Inbox

Message waiting

SELECT

Character Map

To enter a specific alphanumeric character, press one or more times the relevant key for the required character according to the following table: once for the first character, twice for the second and so on.

Key

(spc) 0

1.,;?!- #@&/:()"

ABCabc2

DEFde f3

GHIgh i4

JKLj k l5

MNOmno6

6 7

PQRSpqrs7 TUVtuv8

8 9

WXYZwxyz9

Notes

To delete letters, use the key.

If you want to shift the case while entering letter, press the key.

When entering the same letter twice or a different letter on the same key, wait for a few seconds for the cursor to move automatically, and then select the next letter.

Characters in the displayed order

@ B ? G I P J

Y _ Z ` b

g h j

CLEAR

E q C F r D

Call Lists

Page 29

Phonebook

The phonebook built in your cordless phone allows you to store frequently used numbers so that you can easily make a call without having to remember or enter the phone number. Moreover, it reduces the risks of wrong dialing. You can store up 250 entries in your internal phonebook.

You can store the phonebook entries in the below stated modes: by using the phonebook menu or in Standby mode.

Storing Phonebook Entries

Way 1: by using the phonebook menu

Using Outbox

The on your phone stores the last 5 outgoing and draft messages.

Outbox

If necessary, you can review or resend any message stored in the .

Press key to display the main menu items.MENU

SMS

Press the key to choose .SELECT

Press the or key to choose , then press the

SELECT

Up Down Outbox

key. The display shows the list of the outgoing messages.

Outbox

Call Lists

Press key to display the main menu items.MENU

Phonebook

Press repeatedly the key to choose , then press the

Press the or key to choose , then press the

SELECT

Enter a name that you want to use. For details of entering a name

please see the " ".Character Map

Press the key in order to move the cursor to the number field,

353

then enter the appropriate phone number.

Press the key in order to highlight the ring type number at the

353

right of icon, then press the or key to select the ring you like to associate to the number. Every time you select a ring, the phone sounds with it.

Press the key to save the setting.SELECT

353

Notes

At step 4, to shift the case, press the key while entering text.

At step 5, the or icon is changed to the icon. It indicates that you can only enter digits.

If you make a mistake while entering a number or name, press the key to clear the last character. You can also use the or key to move on others wrong characters, then press the key to clear them.

key.SELECT

Up Down Add entry

key.

Down

Left Right

CLEAR

Select a message that you want to edit by using the or

key, and press the key to access the following options:

Edit

edits the selected message and then press the key to send

it or store it.

Delete

Delete All

Notes

At step 2, the numbers to the right of each line show the number of related messages. Those for show the total number of messages.Outbox

SELECT

deletes the selected message.

deletes all the sent and stored messages.

Up Down

SELECT

SMS - Short Message Service

Page 30

Incoming Calls

Using Incoming Calls Options

When you receive a call, if the caller's information is transmitted from the network on which the call was made (and the caller doesn't hide it), the caller's phone number is displayed. Moreover, when there is a received call which you missed, the pop up message " " followed by the number of missed calls (01, 02, etc.) and the icon will appear on the LCD until you view the details of the missed call.

The last 30 received (or missed) calls are stored in the list, and you can call the said numbers back, delete or store them in the phonebook. To view the number you can go to the list.

Missed Call

Incoming Calls

Review/Dialing a Number in Incoming Calls List

In Standby mode, press the key.LIST

Call Lists

Press the key to access . The list of

incoming calls is displayed on the screen.

Scroll through the incoming calls list using the or key until

you find the desired number, and press the key. You will see the date/time in which you received the call.

To place a call to the number, press the key.

353

Notes

At step 2, if the list is empty, the display will show " ". At step 3, each item of the incoming list is marked with the icon if the call was

really a received call or with the icon if the call was missed (not answered or dropped before you could do that). If a missed call has viewed the detail, then the icon will disappear. If a caller's number repeat, the icon appears in the middle of the icons area.

When the LCD display shows the message " ", you can press the key to access the Incoming Calls list to view the details or press the key to return to the Standby mode.

" " shows on the display and it will be stored in the incoming call list, if the

Private

caller has exercised the option to prevent his name and number from being sent. " " will show and be stored in the incoming call list when someone calls

Out of area

from an area where the telephone company is not offering the caller identification services or an area that is not yet providing name and number delivery to your area via the long distance net work.

" " will show if the phone can not recognize the information within the caller

Error

display messages properly. Date and time of the calls can be seen only if you have previously set the date and

time. If a incoming call number is longer than 16 digits, the icon shows at the right side

of the time.

SELECT Incoming Calls

Up Down

SELECT

No Call

Missed Call xx OK

CANCEL

You can save, delete or dial a number with LDS in the incoming calls list as follows:

Find the desired number in the incoming calls list.

Press the key to display the information of the call.SELECT

Press the key to display the option menus.SELECT

Press the or key to choose the desired option:

Up Down

Add to Phonebook

If the number is longer than 16 digits, the display shows " ", press the key to copy 16 digits of the number to the phonebook.

Delete Delete All

asks if you really want to delete all the entries). Press the key to confirm or to exit without deleting the entries.

Dial with LDS

LDS 1 before the phone number by your phone automatically. For detail, see " ".

SELECT

deletes the selected incoming call number.

allows you to delete the whole incoming calls list (a message

CANCEL

Dialing a Number with LDS

allows you to save the number in the phonebook.

allows you to dial the selected call with being added

Copy 16 digits?

SELECT

Outgoing Calls

The last 20 outgoing calls are stored in the list. You can review, redial and save the last 20 dialed numbers.

In Standby mode, press the key.LIST

Press the or key to choose , then press

the key. The last dialed number is displayed on the screen.

Press the or key to find the desired number.

Press the key to add it to phonebook. Or press the key to redial it. Or press and hold the key to delete it.

Press the key to delete the number digits one at a time then exit

or wait for the unit to time out and return to Standby mode.

Notes

At step 2, if the list is empty, the display will show " ".No Call

Up Down Outgoing Calls

SELECT

Up Down SAVE

Left

Outgoing Calls

Call Lists