AMEDIATECH TECHNOLOGY X96D User Manual

What?s in box Connect fmStick to your TV

1. Connect the small end of USB cable into your X96D and the big
end into the included power adapter or USB port on your TV.

2. Plug the power adapter into a nearby power outlet. We recommend
that you use the included USB cable and power adapter for best
experience.

3. Put the receiver into the USB port on X96D to work with
X96D.

4. Connect X96D into the HDMI port on your TV. If you are having
trouble connecting to the HDMI port on your TV, you can use the
included HDMI extender cable to increase accessibility.

5. Turn on your TV and select with appropriate HDMI input.

X96D is now connected to your TV.
Simply follow the on-screen instructions to complete your set up.

X96D

HDMI Extender

Power Adapter

Micro USB Cable

FCC Radiation Exposure Statement:?
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.