experience quality.
Mini Shotgun Microphone
TinyMike
ATM 216
MADE IN GERMANY
3
ATM 216
CONTENT PAGE
Thank you for choosing an Ambient product. 4
ATM 216 DSLR 5
ATM 216 PH 6
Accessories 7
QBS 7
ATMWJ 7
ATB101 8
ATMB 8
ATMP 8
Technical Data 9
Cable Wiring 10
ATM3.5 10
ATM3.5H 10
ATMEMP 10
Supplementary Information 11
www.ambient.de/en
experience quality.
4
ATM 216
Thank you for choosing an Ambient product.
This high quality miniature microphone can work straight of the low voltage power on
DSLR or small DV cameras. Alternatively, an active adapter cable allows phantom
powered operation, which makes it all the same a suitable accessory for the
popular small HD cameras with XLR inputs. Meeting the requirements of
most common camera types, the Tiny Mike is available in preconfigured
sets, which contain all necessary bits and pieces. A special adapter also
allows for boom or stand mounted operation.
The Tiny Mike has been successfully used in many documentaries and
broadcast applications and was rewarded with the Cinec Award for
technical innovation.
Features
Electret Microphone can be
powered by „Plug in
power“ available on almost
all DV Camcorders.
Good general frequency
response with highly
directional characteristic in
mid and high frequency
range.
Cover: Ex a m p l e o f u s e , Ti n y M i k e m o unted o n C a n o n Ma rk I I ; no t i n c l ud e d i n p u r c h a s e d p ar t s packag e !
© 2014, Ambient Recording GmbH
MADE IN GERMANY
5
Prod.nr.
Description
1)
ATM216
Tiny Mike, miniature electret shotgun microphone
2)
ATMWS
Velvet foam wind shield
3)
ATHRY
Custom Rycote suspension incl. insert and QBS hot shoe mount
4)
ATM3.5
Adaptor cable Binder 3-pin to 1/8” mini jack
5)
ATM3.5H
Adaptor cable Binder 3-pin to 1/8” mini jack, hi-sens.
INSIDE
Miniature Electret Shotgun Microphone for DSLR Cameras
ATM 216
ATM 216 DSLR
www.ambient.de/en
experience quality.
6
Prod.nr.
Description
1)
ATM216
Tiny Mike, miniature electret shotgun microphone
2)
ATMWS
Velvet foam wind shield
3)
ATHRY
Custom Rycote suspension incl. insert and QBS hot shoe mount
4)
ATMEMP
Active adaptor cable Binder 3-pin to 3-pin XLR male
5)
ATHPD
Concentric mounting adaptor with variable diameter to fit all
generic mic brackets
INSIDE
ATM 216
Miniature Electret Shotgun for cameras with 48V Phantom power
ATM 216 PH
© 2014, Ambient Recording GmbH
MADE IN GERMANY
7
ATM 216
Accessories
Mounting Adaptor for 3/8" female Threads
QBS
To mount a microphone suspension or accessory with 3/8" thread to a hot/ cold shoe
we invented our sophisticated QBS mount.
Thanks to the divided screw the thread can be spread when the microphone is in the
perfect position. This way it will lock and protect the microphone from twisting and
turning on the camera with rapid movements.
The necessary standard hex-wrench is included in the purchased parts package.
opened thread
locked thread
Technical Details
Material: anodized Aluminum
Weight: approx. 10 g
Screw diameter: 3/8"
Screw length: approx. 27 mm
Dimension (cold shoe): 18 x 18 mm
Including Allen key®
Fluffy Wind Shield
ATMWJ
Technical Details
Length: approx. 200 mm
Diameter: OD = 100 mm
Color: black
Material: fur
www.ambient.de/en
ATM 216
8
Hot Shoe Adaptor
ATB101
Pivoting hot shoe mount with 3/8" thread
Technical Details
Dimension: approx. 50 mm
Material: POM, aircraft aluminum
Weight: approx. 70 g
„Tiny Bar“
ATMB
„Tiny Bar“ double cold shoe 3/8“ and 1/4“ mount
Technical Details
Dimension (WDH): approx. 100 x 23 x 25 mm
Material: anodized Aluminum
Color: blue
Weight: approx. 42 g
experience quality.
Accessory Mount
ATMP
Hot shoe accessory mount with additional
hot shoe for radio transmitter.
Technical Details
Dimension (accessory mount): 60 x 65 mm
Dimension (additional hot shoe): 45 x 25 mm
Dimension (cold shoe): 18 x 18mm
Material (accessory mount): POM, metal
Weight: approx. 46 g
Exampl e f o r u s e ( S ennheis e r w i reless f i x e d b y b el t clip)
© 2014, Ambient Recording GmbH
MADE IN GERMANY
9
Polar pattern
Hyper cardioid (mini shotgun)
Frequency response +- 2 dB
20- 18000 Hz
Sensitivity
17mV/ Pa
Equivalent SPL rated at CCIR
33dB
Max. SPL 1kOhm
128dB
Dimensions
Ø 12/ 8 mm x 140 mm
Weight (without suspension)
30 g
ATM 216
Technical Data
www.ambient.de/en
ATM 216
10
J4
J3
J2
J1
1
2
3
Minus wire only
Minus wire & shield
red
red
Binder plug
Cable Wiring
Adaptor Cable
ATM3.5
“Tiny Mike” adaptor with 3.5 TRRS right angle plug
Binder 3-pin to 3.5 mm TRS right angle plug
Length: approx. 27 cm
Adaptor Cable, unpadded
ATM3.5H
experience quality.
“Tiny Mike” adaptor with 3.5 TRRS right angle plug, unpadded
High sensitivity
Binder 3-pin to 3.5 mm TRS right angle plug
Length: approx. 27 cm
Active Cable
ATMEMP
“Tiny Mike” Adaptor with 3-pin XLR
Active cable for 48 Volt Phantom power
Binder 3-pin to 3-pin XLR male
Length: approx. 40 cm
XLR cap: red
NC3MX-B with EMP plate on Binder plug
© 2014, Ambient Recording GmbH
MADE IN GERMANY
11
ATM 216
Supplementary Information
To guarantee the best experience with your TinyMike, Ambient provides 2 different
3-pin Binder to mini jack interconnection cables:
One cable is unmarked and a straight connection to the camera/ recorder while the
other one is marked with a yellow sleeve and attenuates the signal level for recording
high sound levels.
This helps to compensate for the wide variation in input sensitivity on devices with
this kind of input and their partial lack of manual level control.
Since it is almost impossible to give a globally valid recommendation it may become
necessary to evaluate the right cable for your application and gear and do a test.
We would advise to start with the unmarked/ unpadded cable and move over to the
padded one only if the audio shows one or more of these symptoms:
Too loud
Obtrusive AGC engagement ("pumping" background sounds in lower passages)
Distorted audio even though signal metering in the display is still below max.
Contrary, the unpadded cable may be indicated if the recording shows increased
noise and hiss.
We hope you enjoy recording with our gear.
Sebastian Fell
Ambient Recording
sebafell@ambient.de
www.ambient.de/en
experience quality.
Ambient Recording GmbH
Schleissheimer Straße 181 C | D – 80797 Munich | vox +49 89 36005510-0 | fax +49 89 651855
www.ambient.de/en | info@ambient.de
MADE IN GERMANY
© 2014, Ambient Recording GmbH
Loading...