ACN-BT Bluetooth interface “BEETLE”
The ACN-BT serves as a link between Ambient apps and dedicated units as certified and announced by
Ambient Recording using Bluetooth 4.0 LE standard.
Initial support is strictly limited to the Sound Devices 788T in combination with the TonMeister app on
selected iOS devices.
Only use with original cables manufactured by Ambient available through authorised supply chains and
exclusively with the intended devices. Connecting to other hardware or using different cables may
damage this and attached units and consecutively risk of electric hazard. Only use indoors in dry
environments, keep away from heat and moisture. Do not establish connection with indications of
mechanical damage of involved devices or connections. You can pair your supported iOS device by
enabling Bluetooth and pairing with the "Ambient Beetle xx" device, where "xx" may state the Firmware
revision.
experience quality.
MADE IN GERMANY
Warranty
Ambient Recording GmbH warrants the ACN-BT Bluetooth adapter against defects in materials and
workmanship for a period of ONE (1) year from date of original retail purchase. This is a nontransferable warranty that extends only to the original purchaser. Ambient Recording GmbH will repair
or replace the product at its discretion at no charge. Warranty claims due to severe service conditions
will be addressed on an individual basis. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE
EXCLUSIVE. AMBIENT RECORDING GMBH DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. AMBIENT
RECORDING GMBH IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
ARISING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY. Because some
jurisdictions do not permit the exclusion or limitations set forth above, they may not apply in all cases.
For all service, including warranty repair, please send the ACN-BT BlueTooth adapter, along with proof
of purchase date to your retailer, or, if not applicable, to:
Ambient Recording GmbH
Schleissheimer Str. 181 C
DE – 80797 Muenchen, Germany
Please obtain a return authorization through the contact form on our website before sending in a unit.
CE Conformity Statement:
Declaration of Conformity
According to ISO/IEC Guide 22
Manufacturer’s Name: Ambient Recording GmbH
Manufacturer’s Address: Schleissheimer Str. 181 C, DE – 80797 Muenchen, Germany
declares that the product: ACN-BT BlueTooth adapter
is in conformity with:
- EN 60950-1:2006 + A11:2009+A1:2010+A12:2011+AC:2011
- EN 300 328 v1.81
- EN 301 489-1 V1.9.2
- EN 301 489-3 V1.4.1
- EN 62311:2008
which is indicated and affirmed by the applied CE marking.
Ambient Recording GmbH
Schleissheimer Straße 181 C | D – 80797 Munich | vox +49 89 36005510-0 | fax +49 89 651855
www.ambient.de/en | info@ambient.de
© 2014, Ambient Recording GmbH
FCC Statement
The FCC requires that the following statements be included in this manual for ACN-BT:
FCC § 15B
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Canada CNR-Gen Section 7.1.3
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
FCC § 15.21
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
FCC § 15.105
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
October 2014
Sebastian Fell, Ambient Recording GmbH
experience quality.
MADE IN GERMANY
Schleissheimer Straße 181 C | D – 80797 Munich | vox +49 89 36005510-0 | fax +49 89 651855
© 2014, Ambient Recording GmbH
Ambient Recording GmbH
www.ambient.de/en | info@ambient.de
Loading...