Amazfit X Product User Manual

Amazfit X Product Manual

01 Package Contents

Additional small wristbandWatch with large wristband

Charging base

User Manual

1

02 About the Watch

Charging port

BioTracker

sensor

Band removal

button

TM

Force Sensing
Button

2

03 Charging the Watch

Only use the original charger to charge your watch. The
charging plates on the back of the watch should be aligned
with those of the charger. Once the watch begins to charge,
the charging indicator will appear on the screen.

Note:
Only use the original charging base provided in the product
package to charge your watch. Also make sure that the
charging base is always kept dry.

3

04 Installing the App

The watch works with App. App helps you control your
smartwatch and all its functions.
Scan the QR code on the Instruction Manual with your mobile
phone to download App to your mobile phone. You can
also download the latest version of App from the Google
Play Store or Apple App store.

Note:

1.

For a better user experience, please
use the most recent version of App.

2.

The operating system needs to be
Android 5.0, iOS 10.0, or above.

4

05 Pairing

1.2.Open the App on your phone register or login with your
account. Select the device to pair in the device list, then
complete the pairing as prompted.
Once the pairing is done, the watch will display the correct
time. You can set the other watch functions as needed.

Note:
Do not pair the watch directly using your mobile phone’s
Bluetooth settings.

5

06 Attaching/Detaching the Watch Strap

1.

Adjust the position of the strap mount to suit your wrist.

2.

To attach or detach the watch strap, refer to the
illustration below.

Note:
After the strap is attached, please pull on the strap using
appropriate force to ensure a secure attachment.

6

07 Regulatory Notice

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:

1.

This device may not cause harmful interference, and

2.

This device must accept any interference received, including
the interference that may cause undesired operation.

FCC ID: 2AC8UA2025

Any changes or modifications that are not expressly
approved by the party responsible for the compliance may
void the user’s authority to operate the device.

7

Note:
This device has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interferences in a residential installation. This
device generates, uses, and may radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television
reception, which can be determined by turning the device o
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

8

- Reorient or relocate the receiving antenna.

- Increase the separation between the device and receiver.

- Connect the device into an outlet on a circuit dierent

from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician

for help.

The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.

9

This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1 ) This device may not cause interference, and
(2) This device must accept any interference, including interference
that may cause undesired operation if the device.

IC: 21806-A2025 CAN ICES-3(B)/NMB-3(B)

Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1 ) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.

10

Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and the maximum (or
lesser) gain approved for the transmitter by Industry Canada.
To reduce the potential of radio interference to other users,
the antenna type and its gain should be so chosen that the
equivalent isotopically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le
présent émetteur radio peut fonctionner avec une antenne
d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les
risques de brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne
dépasse pas l'intensité nécessaire à l'établissement d'une
communication satisfaisante.

11

08 Disposal and Recycling Information

The following symbol signifies that this device has to
be disposed separately from ordinary household
wastes at the end of its life. Please kindly be aware
that this is your responsibility to dispose the electronic
device at recycling centers so as to help conserve the
natural resources.

12

09 Certifications and Safety Approvals

Hereby, Anhui Huami Information Technology Co.,
Ltd. declares that the radio device type A2025 is in
compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the
following internet address:
http://en.amazfit.com/support.html
For more regulatory information and product
certification/compliance logos related to Amazfit X,
please go to Regulatory on your Amazfit X.

13

10 Safety Notice

1.

The device is water resistant with a certified rating of 5 ATM.
This means that the device is resistant to rain and can be
worn while showering. It may also be used in shallow-water
activities, such as swimming in a pool.

2.

However, the watch should not be used when scuba diving,
bathing, taking a sauna, or in other activities involving a
high-velocity of water or the submersion below shallow depth.

3.

Please do not operate the watch underwater. After submerging,
dry it with a dry cloth before operating or charging.

4.

The watch is not protected against chemical reagents, acidic
or alkaline solutions, etc. Defects caused by liquid damages
are not covered under the warranty.

14

11 Basic Specifications

Model: A2025
Battery capacity: 205 mAh
Input: 5V 500 mA MAX
Wireless connection: Bluetooth 5.0 BLE
Frequency: 2402-2480 MHz
Max.output: 0 dBm
Operation temperature: 0°C to 45°C
Waterproofing: 5 ATM
System requirements: Android 5.0 or iOS 10.0 or above

15

12 Warranty and Return Policy

The Amazfit Limited Warranty covers Amazfit products against
manufacturing defects beginning on the original purchase date.
The warranty period is 12 months or other period as the applicable
consumer laws in the consumer’s country of purchase require.
Our warranty is in addition to rights provided by applicable
consumer laws.

Official website: en.amazfit.com
Support: support.amazfit.com

16