Page 1
VELOCE LED BAFFLE
RECESS DOWNLIGHT
LEDS-BR4P
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO
PERSONS READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED:
Wiring supplies
Phillips
Screwdriver
Pliers
Wire Cutters
Drill
as required by
your local
Provincial or State
Electrical code
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATIONS
CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT
AND THE HAZARDS INVOLVED.
3. CAUTION – RISK OF ELECTRIC SHOCK. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE
CORRECT BRANCH CIRCUIT CONDUCTOR.
PACKAGE CONTENTS
PART
A
B
DESCRIPTION
LED Fixture
Wire nuts
A B
This LED light is compatible to be dimmed by
LEVITON# 6633, LEVITON# 6672, LEVITON# 6674.
Dimming levels will vary by dimmer.
QTY
1
3
4-1/2” x 4-1/2”
(114mmx114mm)
Black
Ground
White
Black
Ground
White
1.
Drill hole in ceiling.
(thickness of the sheetrock ≥
1/2”).
2.
Knock blind knockout open
in your required position and
install the Romex connector if
required (1/2” (not included)).
Open the top cover of the J-box by
unscrewing the screws. Connect
supply wires to wires on fixture
with wire nuts. Connect white to
white, black to black, green or
bare copper wire to bare copper
wire. Attach the J-box top cover
and secure with self-taping
screws. If wiring to another light,
also connect white to white, black
to black, green or bare copper
wire to bare copper wire.
3.
Bring the light up to the
hole, hold in the spring clips and
push the light into the ceiling. It is
easier to do one spring at a time.
Made in China
Loading...