BEFORE YOU BEGIN – We’ve included easy-to-follow, step-by-step instructions which have been carefully written to
ensure quick assembly of your grill. Reading the instructions will be a time saver in the end.
YOU WILL NEED – A Phillips screwdriver, adjustable wrench, 1/2” wrench or socket and a 1/4” nut driver or socket will
be needed to assemble this grill. All other necessary hardware has been included.
Questions, Missing or Damaged part? DO NOT RETURN PRODUCT TO STORE
Were here to help. Just call 1-800-229-5647 or visit us at www.sureheat.com. For faster service,
have model number and serial number on hand when calling.
IMPORTANT SAFETY INFORMATION
- Read this manual carefully before using your grill to reduce the risk of fire, burn
hazard or other injury.
- Extreme care should be used because of the high temperatures produced by this
appliance. CHILDREN SHOULD NOT BE LEFT UNATTENDED IN AN AREA
WHERE THE GRILL IS BEING OPERATED.
- This appliance must be kept clear from combustible materials, gasoline or other flammable vapors and liquids. Do not
allow flammable materials to come in contact with grate, burner or hot surfaces.
- Use only outdoors and provide good ventilation to avoid carbon monoxide build-up which could result in injury or death.
- Do not repair or replace any part of this appliance unless it is specifically recommended in this manual. A qualified
service technician should conduct all other service.
- Follow the installation and servicing instructions provided with this product. Have your grill installed by a qualified
service technician.
- Locate the main gas supply valve so that you know how to shut the gas off to your grill.
- If you smell gas, make sure all gas connections are tight before operation. If you continue to smell gas call a
qualified technician.
- When lighting a burner, always pay close attention to what you are doing and be certain you are pushing the igniter
that lights the burner you intend on using.
- Always keep your face and body as far away as from the grill as possible when lighting to reduce the risk of burn.
- Extinguish all flames and do not smoke while engaging gas and igniting the grill.
- A minimum distance of at least 15" must be maintained from any combustible material on both sides and the back of
the grill. Do not place the grill under any overhead unprotected combustible construction.
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS
WARNING indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
NOTE indicates an important piece of information that needs to
be observed to ensure the proper operation of your grill.
DANGER
If you smell gas:
WARNING
1. Do not store or use gasoline or other
flammable liquids or vapors in the
1. Shut off gas to the appliance
vicinity of this or any other appliance.
2. Extinguish any open flame
3. Open lid
4. If odor continues, keep away from the
appliance and immediately call your
2. An LP cylinder not connected for use
shall not be stored in the vicinity of this
or any other appliance.
INSTALLER: Please retain these instructions with the owner so that they may maintain them for
2
future reference.
Welcome & Congratulations
Congratulations on your purchase of a new grill! We are
very proud of our product and we are completely
committed to providing you with the best service
possible. Your satisfaction is our #1 priority.
Please read this Use & Care Manual very carefully. It
contains valuable information on how to properly
maintain your new grill.
We know you’ ll enjoy your new grill and thank you for
choosing our product. We hope you consider us for
future purchases.
PLEASE READ AND SAVE THESE INSTRUCTIONS
This Use & Care Manual provides specific operating
instructions for your model. Use your grill only as
instructed in this manual. These instructions are not
meant to cover every possible condition and situation
that may occur. Common sense and caution must be
practiced when installing, operating and maintaining any
appliance.
Please record your model and serial numbers below for
future reference. This information is found on the serial
plate located on the inside of the grill door.
Questions?
1-800-229-5647
for written inquiries:
Sure Heat Manufacturing
1861 West Oak Parkway
Marietta GA 30062
Register Your Product
The PRODUCT REGISTRATION CARD
should be filled in completely, signed
and returned to Sure Heat Manufacturing.
NOTE: Use only soap and water to clean serial plate.
Model Number: ______________________________
Serial Number: ______________________________
Purchase Date: ______________________________
Gas Type: __________________________________
Please complete and mail in the ProductRegistration Card included with your grill.
Please retain this manual for future reference
Please attach sales receipt here for
future reference.
Amana™is a registered trademark of the Maytag Corporation and is used under license
Keep any electrical supply cords and the fuel supply
hose away from any heated surfaces.
The Spare L.P. Gas Tank Barrier must be installed to
prevent storage of spare L.P. Gas Tanks. Failure to
comply with these instructions could result in a fire or
explosion that could cause serious bodily injury, death,
or property damage.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flames.
3. Open grill hood.
4. If odor continues, immediately
call your gas supplier and local Fire Dept.
CALIFORNIA PROPOSITION 65 - WARNING: The
Burning of gas cooking fuels generates some
by products which are on the list of substances which are
known by the State of California to cause cancer or
reproductive harm. California law requires businesses to
warn customers of potential exposure to such substances.
To minimize exposure to these substances, always operate
this unit according to the use and care manual, provide
good ventilation when cooking with gas.
Do not use the grill in garages, breezeways, sheds or any
enclosed area. Never operate the grill in enclosed areas as
this could lead to a carbon monoxide buildup, which could
result in injury or death. Place the grill on a level surface.
Avoid moving the grill while it is operation.
Always have a qualified service technician perform difficult
conversions or modifications.
Never attach an unregulated gas line to the appliance.
Connection to an unregulated gas line can cause excessive
heat or fire.
TESTED IN ACCORDANCE WITH ANSI
Z21.58a-2006/CSA 1.6a STANDARD FOR OUTDOOR
COOKING GAS APPLIANCES. THIS GRILL IS FOR
OUTDOOR USE ONLY.
Installation must conform with local codes, this unit should
be installed in accordance with the National Fuel Gas Code
No. Z223.1/NFPA 54, National Gas and Propane Installation
Code, CSA B149.1 or Propane Storage and Handling Code,
B149.2
FOR YOUR SAFETY
DO NOT try lighting this appliance without reading the
“ LIGHTING INSTRUCTIONS” section of this manual.
This appliance is not intended to be installed in or
on recreational vehicles or boats.
DO NOT store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
An LP cylinder not connected for use shall not be stored in
the vicinity of this or any other appliance.
FOR OUTDOOR USE ONLY
4
1
2
3
4
AM27 Grill Features
6
7
8
9
5
1. Roll top grill hood
2. Grilling/cooking surface
3. Side shelf
4. Towel bar/utensil hanger
5. Control knobs: main burners
6. Hood Handle
10
11
7. Warming shelf
8. Side burner
9. Control knob: side burner
10. Electronic igniter: main burners and side
burner
11. Cart with doors
5
Getting Started
Wheel Channel Nuts x 6pcs
Self-Tapping Screws x 7pcs
M6 x 10 Phillips Pan Head Screw x 2pcs
Two People Required to Assemble Grill
M5 x 12 Phillips Pan Head Screw x 8pcs
M5 x 35 Phillips Pan Head Screw x 4pcs
"S" Hooks x 3pcs
Tools Needed:
Phillips screwdriver
Adjustable wrench
1/2” wrench or socket
1/4” nut driver or socket
6
Grill Out of Box
1b
6a
3d
12c
6d
4a
1a
1c
5a
4b
8d
2a
12a
7d
12b
2e
2c
2a.Cart Side Left
12b. Main Cooking Grate
2c.Cart Side Right
6a.Cart Door Left
6bCart Door Right
2e.Cart Back
1a.Cart Base
12c. Bread Warmer Grate
3d.Spare LP Gas Tank Barrier
5a.Grill Head Assembly
4b.Drip Pan
8d.Side Burner Shelf Assembly
12a. Flavor Grid
7d.Side Shelf Left Assembly
1bCaster Assembly Left (Swivel wheels)
1cCaster Assembly Right (Swivel Wheels with lock)
Not Shown:
Small Components Package
Tank Secure Ring
Open Box Carefully – Lay Out All Parts
7
Grill Assembly
STEP ONE
a. Set the cart base on the floor and then lay the caster
assembly left on the left side and the caster assembly
right on the right side of the cart base. The large hole
in the cart base will be towards the rear of the base.
b. Pick up the left side of the cart base and set the
caster assembly left in place by inserting the attached
bolts through the three (3) holes in the cart base.
c. Pick up the right side of the cart base and set the
caster assembly right in place by inserting the
attached bolts through the three (3) holes in the
cart base.
1b
1a
1c
8
Grill Assembly
STEP TWO
a. Place the cart side left onto the two (2) outer caster
assembly bolts, make sure the large flange is toward
the front of the cart base.
b. Secure the cart side left in place by hand tightening
the caster assembly nuts onto the caster assembly
bolts.
c. Place the cart side right onto the two (2) outer caster
assembly bolts, make sure the large flange is toward
the front of the cart base.
d. Secure the cart side right in place by hand tightening
nuts onto the caster assembly bolts.
e. Place the cart back onto the two (2) rear caster
assembly bolts.
f. It will be necessary to push the top of the left and right
cart side outward slight to get the cart back down
completely on the cart base.
2a
2f
2f
2e
2b
2c
2d
9
Grill Assembly
STEP THREE
a. Use four (4) M5 x 12 phillips pan head screw to
secure the Cart Back to the Cart Sides.
b. Fasten two (2) caster assembly nuts onto the back
caster assembly bolts.
c. Tighten all six (6) caster assembly nuts with a
wrench.
d. Attach the Spare L.P. Gas Tank Barrier by inserting
the tabs into the slots in the cart back and then
attach the flat end of the barrier to the pre drilled hole
on the cart base with a self tapping screw.
The Spare L.P. Gas Tank
Barrier must be installed
to prevent storage of spare L.P. Gas
Tanks. Failure to comply with these
instructions could result in a fire or
explosion that could cause serious
bodily injury, death, or property damage.
3d
3a
3b
3a
10
3c
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.