Amana LE7163WM/LM User Manual
ana
A Raytheon Company
Use and Care Guide
Home Laundry Automatic Dryer
Models:
(Electric Heat)
LE7163WM/LM
L^^\2L\ \aJ>\ /i--M
S’2> WA\ 1 L./^,
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. (If the dryer changes
ownership, be sure this manual accompanies the dryer.)
Part No. 502223R1
5/95
(Gas Heat)
LG8163WM/LM
Z-\voM| U.-M,
L_G$)VS3waa 1
How to Use Your Dryer . . .
The timer knob will not advance
with the same regularity in the
AUTOMATIC cycle as it does in
the TIME DRY cycle.
For example, you may notice the
timer knob remains in the same
position for 15 minutes before it
begins to move. THE TIMER IS
NOT MALFUNCTIONING. This
only means it took 15 minutes for
the load to become dry enough to
start advancing the timer knob.
The length of time it takes for the
timer knob to begin advancing
depends on the type and size of
load being dried.
Automatic Regular and Automatic Delicate Cycles
Suggested Dryer Settings
Automatic Regular and Automatic Delicate Cycles
Load Size
Load Type
Small Medium
Heavy Cottons
Rugs
Denim
Corduroys
Cotton Work Clothes
Cotton Knits
Dresses
Dress Shirts
Sheer
Lightweight Cottons
Items Labeled "Dry
With Low Heat"
Hint: Set timer based on
previous load types and
sizes. If load is too dry,
set timer closer to Less
Dry mark. If load is too g,
wet, set timer closer to
More Dry mark.
More Dry
More Dry Less Dry
Between
More &
Less Dry
Automatic
Delicate
Between
More &
Less Dry
Less Dry
Automatic
Delicate
Cool-Down Periods
The AUTOMATIC REGULAR and
AUTOMATIC DELICATE cycles
have a five minute cool-down
period at the end of the cycle.
During that time, the load is
tumbled with no heat. This helps
reduce wrinkling. Setting the timer
knob in a COOL-DOWN position
will result in the load being
tumbled with no heat. Do not
remove load until COOL-DOWN
period is complete and dryer
stops. The signal (if selected) will
buzz for the final 10-25 seconds of
the cool-down.
Less Dry
Between
Less Dry
& Cool-Down
Between
Less Dry
& Cool-Down
Automatic
Delicate
Large
Automatic Permanent
Press/Knits Cycle
Use this setting for permanent
press, polyester knits, heavy and
medium weight synthetics that are
“no-iron”.
The COOL TUMBLE portion of this
cycle is a 10 minute cool-down
(no heat) period. The end of cycle
signal (if selected) will buzz for the
last 10-25 seconds of cool-down. If
clothes are not removed at that
time, the timer will advance into
the Cool Tumble cycle, where the
signal will buzz 10-25 seconds
every five minutes of the 15 minute
cycle before dryer stops.
Suggested Dryer Settings
Automatic Permanent
Press/Knits Cycle
Cycle
Load Type
Permanent Press
Polyester Knits
Heavy and Medium
Weight Synthetics
Lightweight, Délicates
Sheers and those
labeled "Dry With
Low Heat"
Always use the SIGNAL with the
AUTOMATIC PERMANENT
PRESS/KNITS cycle. Remove
load immediately upon completing
cycle. This reduces wrinkling.
(Timer
Setting)
More Dry
Less Dry
502223
Loading...