Amana HDC10, HDC12, HDC18, HDC18SD, HDC21 Specification Sheet
Amana Product Information by Fax / Internet
800-843-0304 / http://www.amana.com
Amana Commercial Microwaves: Fax Document Number: 8015 / 000623
Models HDC10 HDC12 HDC18 HDC18SD HDC21
Features
Programmable Timing Pads Yes Yes Yes Yes Yes
2 Digit Menu Item
Programming
Maximum Time Limit 60 Minutes 60 Minutes 60 Minutes 60 Minutes 60 Minutes
LED Display Yes Yes Yes Yes Yes
Power Levels Yes – 11 Yes – 11 Yes – 11 Yes – 11 Yes – 11
Additional Programming
Capabilities Yes Yes Yes Yes Yes
Time Entry Option Yes Yes Yes Yes Yes
Exterior Finish Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Interior Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
See-Through Door Yes Yes Yes No Yes
Lighted Interior Yes Yes Yes No Yes
Cooking Power (Watts)
Usable Cavity Space (cu.ft.) .6 .6 .6 .6 .6
Agency Approvals
UL Listed Yes Yes Yes Yes Yes
CSA Certified Yes Yes Yes Yes Yes
NSF Approved Yes Yes Yes Yes Yes
Exterior Dimensions
(in Inches)
Height 13 3/16 13 3/16 13 3/16 13 3/16 13 3/16
Width 16 5/8 16 5/8 16 5/8 16 5/8 16 5/8
Depth – Overall 21 9/16 21 9/16 21 9/16 21 9/16 21 9/16
Depth - Door Open 90°
Interior Dimensions
(in Inches)
Height 6 7/8 6 7/8 6 7/8 6 7/8 6 7/8
Width 13 13 13 13 13
Depth 12 12 12 12 12
Electrical Requirements
Power Cord
Plug Configuration
Shipping Weight (lbs.)
Warranty
Entire Appliance 3 years full – parts, labor & travel
* Microwave output power based on IEC 705 test.
Yes
100 Items
1,000∗ 1,200∗ 1,800∗ 1,800∗ 2,100∗
36 1/2 36 1/2 36 1/2 36 1/2 36 1/2
120V, 60 Hz, 20 Amp
single phase 208/230V, 60 Hz, 20 Amp, single phase
NEMA 5-20 NEMA 5-20 NEMA 6-20 NEMA 6-20 NEMA 6-20
62 63 74 74 74
Warranty applies only when product is repaired by an authorized Amana servicer.
Yes
100 Items
Yes
100 Items
5’6” Long
Yes
100 Items
1 year full-
parts, labor
and travel
2-3 years
limited-
parts only
Yes
100 Items
3 years full-
parts, labor
and travel
Plug Configurations:
NEMA 5-20 (US)
Amana’s ongoing commitment to quality products may mean a change in product specifications without notice.
Page 1 of 1
NEMA 6-20 (US)
Loading...