You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock, or injury when using your freezer, follow these basic precautions:
WARNING:
SAVE THESE INSTRUCTIONS
■ Plug into a grounded 3 prong outlet.
■ Do not remove ground prong.
■ Do not use an adapter.
■ Do not use an extension cord.
■ Disconnect power before servicing.
■ Replace all parts and panels before operating.
■ Use nonflammable cleaner.
■ Keep flammable materials and vapors, such as gasoline,
away from freezer.
■ Use two or more people to move and install freezer.
■ Keep key away from children.
■ Remove doors or lid from your old freezer or refrigerator.
■ Disconnect power before installing ice maker (on ice maker
kit ready models only).
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
WARNING
Suffocation Hazard
Remove doors or lid from your old freezer or
refrigerator.
Failure to do so can result in death or brain damage.
Proper Disposal of
Your Old Freezer or Refrigerator
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned freezers or refrigerators are still
dangerous ... even if they will sit for “just a few days.”
BEFORE YOU THROW AWAY YOUR OLD FREEZER OR
REFRIGERATOR REMOVE THE DOORS OR LID.
3
INSTALLATION INSTRUCTIONS
WARNING
Excessive Weight Hazard
Use two or more people to move and install freezer.
Failure to do so can result in back or other injury.
When Moving Your Freezer:
Your freezer is heavy. When moving the freezer for
cleaning or service, be sure to cover the floor with cardboard
or hardboard to avoid floor damage. Always pull the freezer
straight out when moving it. Do not wiggle or “walk” the
freezer when trying to move it, as floor damage could occur.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from freezer.
Failure to do so can result in death, explosion, or fire.
➧
2" (5 cm)
3" (7.5 cm)
Unpacking
Remove Packaging Materials
■ Remove tape and glue residue from surfaces before turning
on the freezer. Rub a small amount of liquid dish soap over the
adhesive with your fingers. Wipe with warm water and dry.
■ Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your freezer. For more
information, see “Freezer Safety.”
Location Requirements
IMPORTANT: Check the strength of the floor before installing
your freezer. It should hold the weight of a freezer fully loaded with
food.
Ventilation and Clearance
■ Keep flammable materials and vapors, such as gasoline, away
from freezer.
■ Do not cover the freezer with items such as blankets, sheets,
tablecloths, etc. This reduces air circulation.
■ Allow at least a 3" (7.5 cm) clearance on both sides of the
freezer and 2" (5 cm) between the back of the freezer and the
wall. Leave room above the freezer to open the lid.
Clean Before Using
After you remove all of the packaging materials, clean the inside of
your freezer before using it. See the cleaning instructions in
“Freezer Care.”
4
Temperature
Your freezer operates most efficiently when located in an area
where the temperature is normally between 32°F (0°C) and 110°F
(43°C). Do not install the freezer near an oven, radiator or other
heat source.
Upon Moving to Final Location
1. Level the freezer from side to side and front to back so that
the lid will seal properly. Use shims to level the freezer if
necessary.
NOTE : It should not be necessary to remove the lid during
installation. If, for any reason, the hinges need adjustment,
contact a designated service company.
Electrical Requirements
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Before you move your freezer into its final location, it is important
to make sure you have the proper electrical connection.
Recommended Grounding Method
A 115 Volt, 60 Hz, AC only, 15-amp fused and grounded (earthed)
electrical supply is required.
It is recommended that a separate circuit serving only your freezer
be provided. Use an outlet that cannot be turned off by a switch.
Do not use an extension cord.
NOTE: Before performing any type of installation or cleaning, turn
the Temperature Control to the OFF position as shown and then
disconnect the freezer from the electrical source.
FREEZER USE
Using the Control
Turn the freezer temperature control to 3. This setting is designed
to maintain the temperature at or near 0°F (-17.8°C) under normal
operating conditions.
IMPORTANT: Allow the freezer to cool 6 to 8 hours before filling
with frozen food. Let the freezer cool overnight before adding
large amounts of unfrozen food. Do not add more than 2 to 3 lbs
(0.907 to 1.360 kg) of unfrozen food per cubic foot of freezer
space.
NOTES:
■ When the freezer is first started, the compressor will run
constantly until the interior is cooled. It may take 6 to 8 hours
(or longer), depending on location, room temperature and the
number of times the freezer lid is opened.
■ After the cabinet is cooled, the compressor will turn on and off
as needed to keep the freezer at the proper temperature.
■ Each time the lid is opened, cold air escapes and the
temperature inside the freezer rises.
■ The outside of your freezer may feel warm. This is normal. The
freezer’s design and main function is to remove heat from the
contents and air inside the freezer. The heat is transferred to
the room air, making the outside of the freezer feel warm.
Adjusting the Control
■ Turn control to a higher number for colder temperatures.
■ Turn control to a lower number for less cold temperatures.
5
Indicator Lights
A
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
The indicator lights are located on the front of the freezer above
the control. The lights assure you that your freezer is operating.
The indicator lights are LED which do not need to be replaced.
ON indicator light - shows you that there is power to the freezer.
COMPRESSOR indicator light - shows you that the compressor is
running.
If the ON indicator light is not illuminated, immediately check
for:
■ A power interruption.
■ An unplugged power cord.
■ An open circuit breaker or blown fuse.
NOTE: If there is power to the freezer, and the ON indicator does
not illuminate, the indicator light may be burned out. Call Service
to replace the indicator lights.
If the COMPRESSOR indicator is not illuminated: the
compressor is in its off cycle.
NOTE: The compressor automatically cycles off and on to
maintain the desired temperature.
FREEZER CARE
Defrosting and Cleaning Your Freezer
Accumulation of frost and ice will lessen the performance of the
freezer. Complete defrosting and cleaning should be done at least
twice a year or when frost has built up to about ¹⁄₄" (0.6 cm)
thickness. In high humidity areas, a freezer may need more
frequent defrosting and cleaning.
Before Defrosting
1. Turn the temperature control dial to setting 5, approximately
6 hours before defrosting, to ensure frozen food is at the
lowest temperature before removing it from the freezer.
2. Remove all frozen food. Wrap frozen food in several layers of
newspaper and cover with a blanket. Food will stay frozen for
several hours. You may also store frozen food in a cooler,
additional refrigerator-freezer, or in a cool area.
3. Remove the freezer basket and leave the lid open.
A. Indicator lights
Sliding Basket
Store small packages in the basket to avoid losing them in the
bottom of the freezer. The basket can then be moved from side to
side or it can be removed when loading or unloading the food
below it.
To remove basket, lift it straight up and out. To replace basket,
lower basket back into place.
Defrosting
1. Unplug freezer or disconnect power.
2. Remove the rubber cap from the drain on the freezer floor by
pulling it straight up. Set the cap aside until defrosting is
completed.
3. Place containers of warm water in the freezer, keeping the lid
open, to speed melting. As the ice melts, water will collect on
the bottom of the freezer.
4. Use a plastic scraper to remove frost.
NOTE: Do not use electrical appliances such as hair dryers or
heaters to speed defrosting. Do not use an ice pick, knife, or
other sharp-pointed tool to defrost freezer. Damage can occur.
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.