Top Mount Refrigerator
PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS
LOCATION REQUIREMENTS
ART104TFD
ART106TFD
ART316TFD
Electrical: A 115-volt, 60-Hz, AConly, 15- or 20-amp fused, grounded
electrical supply is required. It is
recommended that a separate circuit
serving only your refrigerator be
provided. Use an outlet that cannot be
turned off by a switch. Do not use an
extension cord.
Water: A cold water supply with
water pressure between 30 and
120 psi (207 and 827 kPa) is required
to operate ice maker and water
dispenser. If you have questions about
your water pressure, call a licensed,
qualified plumber.
IMPORTANT: The pressure of the
water coming out of a reverse
osmosis system going to the water
inlet valve of the refrigerator needs to
be between 30 and 120 psi (207 and
827 kPa).
Reverse Osmosis Water Supply: If a
reverse osmosis water filtration
system is connected to your cold
water supply, the water pressure to
the reverse osmosis system needs to
be a minimum of 40 to 60 psi (276 to
414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10723054A
10/3/14
To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.25 cm) space on
each side. Allow 3" (7.5 cm) of space between overhead cabinets and refrigerator
top. Allow at least 1" (25.40 mm) between back of cabinet and the wall. If your
refrigerator has an ice maker, make sure you leave some extra space at the back for
the water line connections.
If you are installing your refrigerator next to a fixed wall, leave enough space on the
hinge side to allow for the door to swing open.
NOTE: This refrigerator is intended for use in a location where the temperature
ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The
preferred room temperature range for optimum performance, which reduces
electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F
(32°C). It is recommended that you do not install the refrigerator near a heat source,
such as an oven or radiator.
Model
Number
Model
Size
Reversible
Door
Depth -
With Door
“A”
Cab.
Width
“B”
Depth Cabinet
Only “C”
Cab.
Height
“D”
Overall
Height
“E”
Depth Door
Open 90°
“F”
ART104TFD 14.3 cu. ft. Yes
30"
(76.2 cm)
28"
(71.1 cm)
25¹⁄₄"
(64 cm)
62³⁄₈"
(158.4 cm)
62⁷⁄₈"
(159.7 cm)
56³⁄₄"
(144.1 cm)
ART106TFD
ART316TFD
16 cu. ft. Yes
31¹⁄₄"
(79.4 cm)
28"
(71.1 cm)
25¹⁄₄"
(64 cm)
65³⁄₈"
(166 cm)
65⁷⁄₈"
(167.3 cm)
56³⁄₄"
(144.1 cm)
E
overall
D
top of
cabinet
B
A
C
90˚
F
" (7.5 cm)
3
1
/
2" (1.25 cm)