Amana ARG3601L, ARG3601LL, ARG3601W, ARG3601WW Specification Sheet

Amana Product Information by Fax / Internet
800-843-0304 / http://www.amana.com
Amana Gas Freestanding Manual Clean Ranges: Fax Document Number: 4038 / 000807 Models ARG3601
General
LED Electronic Clock with Minute Timer Yes Porcelain Backguard Yes Oven Indicator Light --­ Upswept Cooktop Design Yes Main Top Support Rods --­ Exclusive Die-Cast Sealed Burners Yes Automatic Pilotless Ignition Yes Porcelain Burner Bowls --­ Square Steel-Grates Yes
3.7 Cu. Ft. Porcelain Standard Clean Oven Yes Oven Racks with Five Positions (# of) 2 Low Broil Broiling System Yes Porcelain Broiler Pan & Grid Yes Removable Counter Balanced Oven Door (Type) Glass w/Window Towel Bar Oven Door Handle Yes Manual Interior Oven Light Yes Panel Light Switch ---
Colors
White-on-White ARG3601WW Almond-on-Almond ARG3601LL White-on-Black ARG3601W Almond-on-Black ARG3601L
Burners (BTU’s - Nat./LP)
4 Medium Burners 9,700 / 8,000
Oven (BTU’s - Nat./LP)
Bake / Broil 18,000 / 16,000
Electrical
Electrical Requirements 120 VAC, 60 Hz, 15 Amp (maximum)
Warranty applies only when product is repaired
Warranty
Entire Appliance Gas Surface Burners Limited 5 years - parts only
by an authorized Amana servicer.
Full 1 year - parts, labor and travel
Limited 2 years – parts only
Amana’s ongoing commitment to quality products may mean a change in product specifications without notice. Page 1 of 2
Amana Product Information by Fax / Internet
800-843-0304 / http://www.amana.com
Models ARG3601 Oven Interior Dimensions - Door Closed
(in Inches)
Height 16 Width 23 Depth 17 1/2
Exterior Dimensions (in Inches)
Height - Overall 46 1/2 Width 30 Depth - Oven Door Closed with Handle 28 1/4 Clearance - Oven Door 20 Height of Cooktop 36 Approximate Shipping Weight (lbs.) 164
*Please refer to current installation instructions for all installation information
Minimum Clearances to Combustible Surfaces
Minimum clearance to rear wall is 0 inches
Minimum clearance to a vertical right or left side wall
extending above cooking surface is 3 inches
Minimum clearance to countertop/cabinet on each side is 0 inches
Minimum of 30 inches between top of cooking surface and bottom of an unprotected wood or metal cabinet.
24 inches between cooking surface and protected wood or metal cabinet above range. Cabinet bottom must be protected by at least ¼ inch thick millboard with not less than No. 28 MSG sheet steel, .015 inch thick stainless steel, .024 inch thick aluminum, or .020 inch thick copper.
A – 30 inches minimum B – 0 inches C – 30 inches unprotected/24 inches protected minimum D – 13 inches E – 0 inches F – 25 inches maximum G – 36 inches maximum H – 3 inches minimum (both sides of range) J – 18 inches minimum
H
A
J
B
C
E
D
F
G
Amana’s ongoing commitment to quality products may mean a change in product specifications without notice. Page 2 of 2
Loading...