Amana ALG868QCW Parts Diagram

!

Bulletin

Comm. Microwave Dehumidifier Dishwasher
Domm. Microwave Export Comm. Heating Product

√

Laundry Product

Refrigerator/Fzr Room Air Cond.

Type Parts Manual Update

Policy Letter

√ Service Information

Attention Service Managers

√ Service and Parts Managers

Models ALE / ALG series dryers
Issue Damaged Moisture Sensor Board Assembly
Warranty Covered by terms of product warranty, should circuit board be replaced.
Action Follow the procedure below for proper installation or replacement of the moisture sensor circuit

board.

PTAC Products Range Product

Date

No

June 29, 2001
ASQ−234−B

Page 1 of 1

WARNING

To avoid risk of damaging circuit board do not bend or flex the moisture sensor circuit board.

1. Assemble moisture sensor circuit board (40084301) to plastic supports (501523).
Carefully align the supports to the corner holes on the circuit board and apply pressure in the
corners only when attaching supports.

NOTE:

2. Attach the moisture sensor board and supports to the control hood support panel, by aligning

Do not apply pressure across the entire circuit board.

each plastic support with the holes on the control hood support panel. Insert each plastic support
by applying pressure to the corner of the circuit board at each corner.

Amana Appliances • 2800 220th Trail • Amana, Iowa, 52204 • 319/622-8916 • Fax [phone]