Amana ADB1400AWB0, ADB1400AWB2, ADB1400AWB4, ADB1400AWD0, ADB1400AWD2 Owner’s Manual
...
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered inTROUBLESHOOTING,
please visit our website at www.amana.com for additional information. Ifyou still need assistance, call us at 1-800-843-0304. In
Canada, visit our website at www.amanacanada.ca or call us at 1-800-807-6777.
You will need your model and serial number located near the door on the right-hand or left-hand side of the dishwasher interior.
Para obtener acceso a "lnstrucciones para el usuario de la lavavajillas" en espa_ol, o para obtener informaci6n adicional de su
producto, visite: www.amana.com
Tenga listo su nQmero de modelo completo. Puede encontrar su nQmero de modelo y de serie en la etiqueta ubicada cerca de la
puerta al lado derecho o izquierdo del interior de la lavavajillas.
Tableof Contents
DISHWASHER SAFETY ............................................................. 1
QUICK STEPS ............................................................................ 3
DISHWASHER USE .................................................................... 3
DISHWASHER CARE ................................................................. 5
TROUBLESHOOTING ................................................................ 5
WARRANTY ................................................................................ 7
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
W10310515A
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
[] Read all instructions before using the dishwasher. [] Do not tamper with controls.
[] Use the dishwasher only for its intended function.
[] Use only detergents or rinse agents recommended for use in
a dishwasher, and keep them out of the reach of children.
[] When loading items to be washed:
1) Locate sharp items so that they are not likely to damage
the door seal; and
2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.
[] Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
[] Do not touch the heating element during or immediately after
use.
[] Do not operate the dishwasher unless all enclosure panels
are properly in place.
[] Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.
[] To reduce the risk of injury, do not allow children to play in
or on the dishwasher.
[] Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
[] Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
SAVE THESE iNSTRUCTiONS
GROUNDING iNSTRUCTiONS
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. The dishwasher is equipped with a cord
having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
SAVE THESE iNSTRUCTiONS
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Check with a qualified electrician or service representative
if you are in doubt whether the dishwasher is properly
grounded. Do not modify the plug provided with the
dishwasher; if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
[]
For a permanently connected dishwasher:
The dishwasher must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the dishwasher.
Tip Over Hazard
Prepare and load
dishwasher.
Select a cycle and option.
HEAVY NORMAL 1HOUR HI HEATED 4 HOUR
_ _ TEMP DRY DELAY
® • 0_
rinse aid for
forcleaningand _..,
drying.
2 Add detergent , j/.'
_%_w_h_ I__
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before
washing.
Upper rack
Make sure nothing keeps spray arm(s) from
spinning freely. It is important for the water
spray to reach all soiled surfaces.
• Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.
• Items should be loaded with soiled surfaces facing down and
inward to the spray as shown. This will improve cleaning and
drying results.
• Avoid overlapping items like bowls or plates that may trap food.
• Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked "dishwasher safe."
• To avoid thumping/clattering noises during operation: Load
dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks.
When loading silverware, always place sharp
items pointing down. Mix some of the items
pointing up and some pointing down.
Lower rack
_ Start dishwasher.
F
®
@
STEP2
Add Detergent
NOTE: If you do not plan to run a wash cycle soon, run a rinse
cycle. Do not use detergent.
• Use automatic dishwasher detergent only. Add powder, liquid
or tablet detergent just before starting a cycle.
• Fresh automatic A
dishwasher detergent
results in better
cleaning. Store tightly
closed detergent B
container in a cool,
dry place.
A. Cover latch
B. Main Washsection
• The amount of
detergent to use depends on:
How much soil remains on the items - Heavily soiled loads
require more detergent.
The hardness of the water - If you use too little in hard water,
dishes won't be clean. If you use too much in soft water,
glassware will etch.
Soft to Medium Water (0-6 grains per U.S. gallon)
[typical water softener water and some city water]
Medium to Hard Water (7-12 grains per U.S. gallon)
[well water and some city water]
• Depending on your water hardness, fill the Main Wash section
of the dispenser as shown. Fill the Pre-Wash section to the
level shown, if needed.
NOTE: Fill amounts shown _HardWater
are for standard powdered
detergent. Follow instructions s0ftwater
on the package when using
other dishwasher detergent. MainWash
Add Rinse Aid
Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid your dishes and dishwasher
interior will have excessive moisture. The Heated Dry option will
not perform as well without rinse aid.
C. Pre-Washsection
\
HardWater
SoftWater
Pre-Wash
C
Rinseaidkeepswaterfromformingdropletsthatcan
dryasspotsorstreaks.Theyalsoimprovedryingby
allowingwatertodrainoffofthedishesafterthefinal
rinse.
Rinseaidhelpstoreduceexcessmoistureonthe
dishracksandinteriorofyourdishwasher.
Check the rinse aid indicator. Add rinse aid when indicator
drops to "Add" level or, when rinse aid indicator looks light. A
light visual indicator means to add rinse aid, and a dark visual
indicator means that there is sufficient rinse aid in the
dishwasher.
Dispenser with one lid - To add
rinse aid, turn the dispenser
cap to "Refill" and lift off. Pour
rinse aid into the opening until
the indicator level is at "Full."
Replace the dispenser cap and
turn to "Lock." Make sure cap
Refill
is fully locked.
or
Dispenser with two lids - To add rinse
aid, press the cover release button to
open the cover. Fill the dispenser with
rinse aid up to the dotted line. Close
the cover.
Lock
_turn
to lock
i
Full
Add
Select Options
You can customize your cycles by
pressing the options desired.
HI HEATED 4 HOUR
TEMP DRY DELAY
® ® ®4
Hi-Temp Wash - (use only with Heavy
and Normal wash cycles) heats the
water during the wash portions of the
cycle.
Heated Dry - (automatic with all except rinse cycle) use for best
drying results. Turn off by pressing HEATED DRY so that the light
goes off.
4-Hour Delay - (any cycle) offers the choice to start the D_o_Y_
dishwasher automatically at a later time. Select a wash
4 HOUR
cycle and options. Press START/RESUME. Close the [_[
door firmly.
Locked - (on 4-Hour Delay button) use to avoid
HO_D3s_c
TOLOC_
unintended use of your dishwasher. When Control Lock
is lit, all buttons are disabled. The dishwasher door can be opened
while the controls are locked.
To turn on Lock:
Press and hold 4-HOUR DELAY for 3 seconds. The Locked light
glows. If you press any pad while your dishwasher is locked, the
light flashes 3 times.
To turn off Lock:
Press and hold 4-HOUR DELAY for 3 seconds. The Control Lock
light turns off.
STEP4
A. Cover release button
NOTE: For most water conditions, the
factory setting of 2 will give good
results. If you have hard water or notice
rings or spots, try a higher setting. Turn
the arrow adjuster inside the dispenser
by either using your fingers or inserting
a flat-blade screwdriver into the center
of the arrow and turning.
STEP3
Select a Cycle
NOTE: Heavier cycles and options affect cycle length. Some
cycles and options will take up to 31/2hours to complete.
Heaw - Use for heavily soiled, hard-to-
clean items.
Normal - Use for normal food soil. The
energy usage label is based on this cycle.
1-Hour Wash - Use for lightly soiled items.
For fast results, 1-Hour Wash will clean using
slightly more water and energy.
HEAVY NORMAL 1HOUR
• 0 •
Start or Resume a Cycle
• Run hot water at the sink nearest your dishwasher until the
water is hot. Turn off water.
Push door firmly closed. The door latches •
automatically. Select the wash cycle and options
desired OR press START/RESUME to repeat the
same cycle and options as in the previous wash
cycle.
You can add an item anytime before the main wash starts.
Open the door slowly and add the item. Close the door firmly.
Press START/RESUME.
Cycle status indicators allow you to follow the STATUS
progress of your dishwasher cycle. Clean indicator
glows when the cycle is finished. OCLEAN
CleaningtheDishwasher
Cleantheexteriorofthedishwasherwithasoft,dampclothand
milddetergent.Ifyourdishwasherhasastainlesssteelexterior,a
stainlesssteelcleanerisrecommended-StainlessSteelCleaner
andPolishPartNumber31462.
Cleantheinteriorofthedishwasher,withapasteofpowdered
dishwasherdetergentandwateroruseliquiddishwasherdetergent
onadampspongetocleanthecooled-downinterior.
Awhitevinegarrinsemayremovewhitespotsandfilm.Vinegaris
anacid,andusingittoooftencoulddamageyourdishwasher.
Put2cups(500mL)whitevinegarinaglassordishwasher-safe
measuringcuponthebottomrack.Runthedishwasherthrougha
completewashingcycleusinganair-dryoranenergy-savingdry
option.Donotusedetergent.Vinegarwillmixwiththewashwater.
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
to possibly avoid the cost of a service call.
In the U.S.A., www.amana.com In Canada, www.amanacanada.ca
Dishwasher is not operating properly
• Dishwasher does not run or stops during a cycle
Is the door closed tightly and latched?
Is the right cycle selected?
Is there power to the dishwasher? Has a household fuse blown,
or has a circuit breaker tripped? Replace the fuse or reset the
circuit breaker. If the problem continues, call an electrician.
Has the motor stopped due to an overload? The motor
automatically resets itself within a few minutes. If it does not
restart, call for service.
Is the water shutoff valve (if installed) turned on?
It is normal for certain cycles to repeatedly pause for several
seconds during the main wash.
• Clean light is flashing
Call for service.
• Dishwasher will not fill
Is the overfill protection float able to
move up and down freely? Press down
to release.
Dishwasher seems to run too long
The dishwasher can run up to 31/2hours depending on soil
level, water temperature, cycles and options.
Is the water supplied to the dishwasher hot enough? The
dishwasher runs longer while heating water.
Is the dishwasher cycle time within the cycle times? See cycle
sections wash times. A delay automatically occurs in some
wash and rinse cycles until the water reaches the proper
temperature.
This dishwasher is equipped with an optical sensor wash that
detects water temperature, soil and detergent amount. Wash
cycles are adjusted based on what is sensed.
IMPORTANT: The very first wash cycle after installation in your
home will be adjusted to include an additional 2 rinses. This
cycle must not be interrupted for proper sensor adjustment. If
this adjustment cycle is canceled or stopped before the Clean
light comes on at the end of the cycle, the next wash cycle will
repeat this sensor adjustment.
• Water remains in the dishwasher
Is the cycle complete?
Ifyouhaveadrainairgap,
checkandcleanitifthe
dishwasherisn'tdraining
well.
Storing the Dishwasher
If you will not be using the dishwasher during the summer months,
turn off the water and power supply to the dishwasher. In the
winter, if the dishwasher could be exposed to near freezing
temperatures or is left in a seasonal dwelling such as a second
home or vacation home, avoid water damage by having your
dishwasher winterized by authorized service personnel.
• Detergent remains in the covered section of the dispenser
Is the cycle complete?
Is the detergent lump-free? Replace detergent if necessary.
Is the dispenser door blocked by dishes or cookware when the
dishwasher door is closed?
• White residue on the front of the access panel
Was too much detergent used?
Is the brand of detergent making excess foam? Try a different
brand to reduce foaming and eliminate buildup.
• Odor in the dishwasher
Are dishes washed only every 2 or 3 days? Run a rinse cycle
once or twice a day until you have a full load.
Does the dishwasher have a new plastic smell? Run a vinegar
rinse as described in "Dishwasher Care."
• Condensation on the kitchen counter (built-in models)
Is the dishwasher aligned with the countertop? Moisture from
the vent in the dishwasher console can form on the counter.
Refer to the Installation Instructions for more information.
Dishes/silverware do not dry completely
• Dishes do not dry completely
Did you use a rinse aid? Your dishwasher is designed to use
rinse aid for good drying performance. Without rinse aid your
dishes and dishwasher interior will have excessive moisture.
The heat dry option will not perform as well without rinse aid.
• Dishes are not dry
Did you load your dishwasher to allow proper water drainage?
Do not overload. Use a liquid rinse aid to speed drying.
Are the plastics wet? Plastics often need towel drying.
Is the rinse aid dispenser empty?
Did you use an air-dry or energy-saving dry option? Use a
heated drying option for dryer dishes.
• Try adding the "Hi Temp" option for further improved
drying performance.
• Use a more aggressive cycle, such as "Heavy" cycle, for
improved drying performance.
Loading...