Amana 10M52TA, 10M52TB, 12M52TA, 12M52TB, 18M53TA Owner's Manual

...

Quiet Zone

Room Air Conditioner

Contents

Electrical Requirements........................................2

Electrical Grounding Instructions .................................. 2

Safety Features......................................................2

Compr essor Lo ckout ....................................................... 2

Low Voltage Protection .................................................... 2

Advantages of Amana’s Electronic Controls ....... 2

Operation ............................................................... 3

Vent Control ..................................................................... 3

Unit Control ...................................................................... 3

General Information .............................................. 6

Changing Air Flow Direction ........................................... 6

Air Flow Around Unit........................................................ 6

Care and Maintenance .......................................... 6

Air Filter ........................................................................... 6

Before Calling For Service ................................... 7

Fan Motor ......................................................................... 7

Slide out Chassis ............................................................ 7

Model Identification ............................................. 8

Any Questions? ......................................................8

50 Hz

Use And Care

Manual

Please read this Use and Care Manual thoroughly. This manual provides proper maintenance information for maximum benefit of the features selected.

RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION

WARNING

To avoid death, personal injury or property damage due to overheating, do not leave this room air conditioner unattended when used as cooling or life support for persons or animals unable to react to unit failure. Take precautions to warn or guard against such an occurrence.

Electrical Requirements

Electrical Grounding Instructions

This appliance is equipped with a three-prong grounding plug for protection against possible shock hazards. If a twoprong wall receptacle is encountered, the customer is required to contact a qualified electrician and have the twoprong wall receptacle replaced with a properly grounded three-prong wall receptacle in accordance with the National Electrical Code.

Room air conditioners are designed to operate according to requirements on the nameplate and as shown in Figure 1. Fuse or circuit breaker ratings must be according to the fuse instruction label and as shown in Figure 1. Do not plug models marked “Use on Single Outlet Circuit Only” into a circuit with another appliance or light fixture.

WARNING

To avoid death, personal injury or property damage due to electrical shock, this unit must be grounded. Do not under any circumstances cut or remove the round grounding prong from the plug. Do not use a two-prong adapter.

Safety Features

This room air conditioner is equipped with an electronic control to improve comfort and ensure reliability.

Compressor Lockout

To extend the life of the compressor a three minute time delay will occur when:

• Electrical power is first supplied to the unit

• The thermostat is turned down immediately after the compressor stops running.

• The Fan Control is quickly turned from FAN ONLY to COOLING mode or vice versa.

Low Voltage Protection

This unit is equipped with “brownout” protection. In case of an extreme brownout, the Amana control will interrupt power to the unit to prevent compressor failure. When the line voltage reaches at least 180 VAC, the control will reenergize your unit.

Note: A compressor lockout will occur after the unit is re-energized.

WARNING

To avoid death, personal injury or property damage due to electrical shock, do not use an extension cord. Do not pinch the power cord. Do not remove the warning tag from the power cord.

RECEPTACLE

250

- 16

Figure 1

AMP

PLUG

Advantages of Amana’s Electronic

Controls

•Digital Temperature Setting

- Temperature can be set from 16°C to 32°C in 1°C

increments

•Digital Temperature Display

- Shows indoor room temperature in FAN ONLY

mode

- Shows desired temperature setting in other modes

•Computer Memory that Remembers

- The unit remembers the last settings used when

last turned on.

•TempAsure® Thermostat

- Maintains set temperature within 1.0°C for maxi-

mum comfort

•Smart Cool

•Energy Saver with TempAsure® air sampling

•Delay Timer

Operation

Vent Control

QUIET ZONE

EXHAUST CLOSED

Open or close the vent by sliding the vent control lever to the appropriate setting.

EXHAUST - This setting opens the vent to move indoor air out.

Note: To conserve energy, the unit should be set to the FAN ONLY mode when using this setting.

CLOSED - In this position the vent is closed and room air is recirculated and filtered. This position should be used for all normal cooling operations (see underlined cooling options on control panel).

Unit Control

ENERGY SAVER (HIGH, MED and LOW) -

ENERGY SAVER mode provides the most

energy efficient use of your room air conditioner. I nENERGY SAVER mode, the fan stops when the compressor stops cooling. This feature can be used with SMART COOL or cooling with any fan speed.

Amana’s new air sampling system works to maintain set temperature within 1.5°F while in ENERGY SAVER mode. Approximately every 5 minutes the fan will turn on and “sample” the room air to determine if cooling is needed. If the room is cool enough, the fan will cycle off. If the room needs further cooling, the compressor will start along with the fan until the set temperature is reached.

ENERGY SAVER has a soft start fan feature. This feature starts the fan in low speed to reduce noise.

FAN ONLY - FAN ONLY circulates room air at the set fan speed without cooling. This

feature can be turned off by pressing the FAN ONLY, the SMART COOL, or the ENERGY SAVER button. Indoor temperature is displayed in FAN ONLY mode.

SM ART

LOW

ME D

HIGH

ENERG Y

OFF

COOL

FAN

COOLING

FAN

SAVER

FAN

ON LY

SET

Control Panel

OFF - Completely shuts off the unit.

SMART COOL - SMART COOL adjusts the

fan speed of the unit to achieve the selected temperature. The SMART COOL feature

uses computer logic to cool the room quickly and quietly. The fan speed starts on high, automatically switches to medium, and finally goes to low as the room temperature nears the set temperature.

LOW FAN, MED FAN, HIGH FAN

- These three buttons are used to

select either a low, medium or high fan speed to cool. If FAN ONLY is selected these buttons change fan speed without cooling. Selecting the fan speed starts normal cooling.

DELAY

TIMER

QUIET ZONE

EXHAUST CLOSED

SET Temperature - These key pads increase or decrease the set tempera-

ture.

DELAY TIMER - This button provides a

means of delaying the start up or shut down of the air conditioner from 1 to 24 hours from the present time. After setting the delay timer, the displayed time will countdown to unit start or stop. See next page for details.

+ 5 hidden pages