Assembly Instructions for
Chair No. DC410
PART LIST
KEY QTY DESCRIPTION
1 5 Casters or Glides
1
2
3
4 1
5 1 Seat Plate
6 1 Seat
7
8
9 1
10
11
12 1
13 1
USE THIS PRODUCT ONLY FOR SEATING ONE PERSON AT A TIME.
00 NOT USE THIS CHAIR AS A STEP STOOL / LADDER.
DO NOT USE CHAIR UNLESS ALL BOLTS . SCREWS AND KNOBS ARE
TIGHT . AT LEAST EVERY SIX MONTHS . CHECK ALL BOLTS . SCREWS
AND KNOBS TO BE SURE THEY ARE TIGHT.
’ IF ANY PARTS ARE MISSING . BROKEN . DAMAGED OR WORN . STOP
USE OF THE PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY
AUTHORIZED PARTS.
' FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS
INJURY.
Base
Gas Cylinder
1
Cylider Cover
1
Backrest + Plastic Cover
1 Connector Cover
Backrest Height Adjustment Knob
Backrest Stopper
1
Seat Plate Screws
6
Footrest
Knob For Footrest
PREVENTIVE MAINTENANCE AND WARNING!
Put the plastic stopper
into the backrest post
hole, after assembling
backrest post to
Mechanism.
The Connector
plastic bellow is
(orned on the
side in order to
insert onto the
rear of
seat plate.
y
Alvin & Corrpany, Inc. Bloomfield, Ct Grand Prairie, TX www.alvinco.com
Loading...