aluratek ABHM100F Quick Start Guide

Wireless Headset with Noise Cancelling Boom Mic

Quick Start Guide

Package Contents Product Highlights

Your order has been carefully packaged and inspected. The following accessories should
be included in your package. Please inspect the contents of the package to ensure that
you have received all items and that nothing has been damaged. If you discover a problem,
please contact us immediately for assistance.

USB Charging Cable Bluetooth Dongle

Multifunction
Button (MFB)

answer / end phone
calls, pair to Bluetooth
devices, play / pause
music, power ON / OFF

Adjustable

Boom Mic

Adjustable Headband

Mute Button and
LED Indicator

aluratek.com

Operation Operation

1. Power ON: Press and hold MFB for 3 seconds to power ON the headset

2. Power OFF: Press and hold MFB for 3 seconds to power OFF the headset

3. Pairing Mode: Make sure ABHM100F is OFF. Press and hold MFB for 3-4 seconds.
The red/blue LED will flash alternately, the headset is now in pairing mode.

4. Answer a call: Press MFB

5. End a call: Press MFB

6. Reject a call: Press and hold MFB for 2 seconds and release after hearing tone.

7. Redial last outgoing call: In standby mode, rapidly press MFB twice.

8. Volume + : In conversation or music mode press “...” to increase volume

9. Volume - : In conversation or music mode press “.” to decrease volume

Operation

qsg Q10570 Copyright © 2020 Aluratek, Inc. All Rights Reserved.

10. Play/Pause: In music mode, press MFB button.

11. Forward: In music mode, press and hold “...” button

12. Backward: In music mode, press and hold “.” button

13. Mute: Press the mute button to mute the call. Repeat the procedure to cancel
mute function.

Operation Operation

model ABHM100F

Volume Control

Operation

LED Indicator Status

LED Indicator Status

ON Blue LED flashes 2 times

OFF Red LED flashes 2 times

Pairing Mode LED flashes red & blue continuously

Unconnected standby
mode

Connected standby
mode

Blue LED flashes twice every 5 seconds

Blue LED flashes once every 10 seconds

Type-C Charging Port

Pairing with a Smartphone

1. Make sure ABHM100F is OFF.

2. Press and hold MFB for 3-4 seconds until blue and red LED flashes alternately.

3. Follow the operating instructions for your smartphone and enable bluetooth
pairing mode.

4. Select ABHM100F in the list, then click Connect.

5. If asked for a password or PIN, enter 0000, and press “Yes” or “Confirm”. If the
connection is successful, a blue LED will flash every 10 seconds. If the pairing is
unsuccessful, the LED will keep flashing red & blue alternately. Try and pair again.

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by whatever measures may be
required to correct the interference.

If your computer system does not have Bluetooth, please insert the included Bluetooth
adapter before following the steps below for the pairing. Most OS will download the
driver automatically. If not, please visit www.aluratek.com product page to download
the driver.

Pairing with Window System with Bluetooth

1. Make sure ABHM100F is OFF

2. Press and hold MFB for 3-4 seconds until blue and red LED flashes alternately.

3. Go to Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other
device > Bluetooth

4. Select ABHM100F in the list, then click Connect.

5. If asked for a password or PIN, enter 0000 and press “Yes” or “Confirm”. If the
connection is successful, a blue LED will flash every 10 seconds. If the pairing is
unsuccessful, the LED will keep flashing red & blue alternately. Try and pair again.

Warranty

Aluratek warrants this product against defect in material or workmanship for 1 YEAR
from the date of purchase.

This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has
been removed or altered on the product.

This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any part of the product.
C) Damage due to improper operation or maintenance, connection to improper equipment,
or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.

IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR
IT'S DOCUMENTATION.

Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's
products, contents or use of this documentation and all accompanying software, and specifically
disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek
reserves the right to revise or update it's product, software or documentation without obligation to
notify any individual or entity.

Pairing with Mac System with Bluetooth

1. Make sure ABHM100F is OFF

2. Press and hold MFB for 3-4 seconds until blue and red LED flashes alternately.

3. Go to Apple menu > System Preferences, then select “Bluetooth”.

4. Select ABHM100F in the list, then click Connect.

5. If asked for a password or PIN, enter 0000 and press “Yes” or “Confirm”. If the
connection is successful, a blue LED will flash every 10 seconds. If the pairing is
unsuccessful, the LED will keep flashing red & blue alternately. Try and pair again.

Charging and Low Battery Warning

While charging, a red LED will be illuminated. When charging is complete, the red LED
will turn off. Low power is indicated by a red LED light flashing once every 30 seconds.
The device will need to be charged and will power off automatically after 5-10 minutes.

Technical Support

If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.

E-mail: [e-mail]
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978