Aluratek ABDS02F User Manual

DYNAMITE Dual Bluetooth® Streaming Stereo Speakers
Quick Start Guide
Package Contents Product Highlights Operation
Your order has been carefully packaged and inspected. The following accessories should be included in your package. Please inspect the contents of the package to ensure that you have received all items and that nothing has been damaged. If you discover a problem, please contact us immediately for assistance.
Speaker
Microphone
Power Button
Control Functions
Function Operation
Power ON
Power OFF
Pairing When ON, the LED flashes blue
When OFF, press and hold the Button for 3 seconds until the blue LED flashes
When ON, press and hold the Button for 4 seconds until the blue LED turns off
model ABDS02F
aluratek.com
qsg Q10455 Copyright © 2017 Aluratek, Inc. All Rights Reserved.
LED Indicators
LED Indicator Status
Solid Red LED Charging
LED OFF
Flashing Blue rapidly Pairing mode
Solid Blue LED
Power OFF / Fully charged if connected to a power source
Paired and connected
Low battery
Pairing
Stereo Mode: Stream to both speakers.
1. Power on both speakers by pressing the button for 3 seconds
2. Press the button twice on one of the speakers
3. The speakers will connect to each other automatically confirmed by a sound prompt. After the initial pairing, the two speakers will connect to each other automatically when they are both powered on.
4. Activate your device’s Bluetooth function and set your device to search for Bluetooth device. Select ABDS02F when it is found.
5. After connecting successfully, the blue LED will flash on one speaker and stay on for the second speaker
When ABDS02F is connected to a smartphone, the button will default to music playback mode where you can press the button once to Play or Pause music. You can switch to Selfie mode for the button by pressing the button twice. Under selfie mode with the camera app active on the smartphone, press the button to take the picture.
USB Charging Cable
Registration Card
Micro USB Charging Port
LED Indicator
Operation
Charging The Battery
The battery is not fully charged and it is highly recommended that you charge ABDS02F before you begin using it.
Note: Using ABDS02F “out of the box” will not harm the device. You will experience reduced battery life as the unit will not be fully charged.
Connect the larger USB end of the cable provided to your PC or USB power adapter (not included). Plug the smaller Micro USB to the charging port of ABDS02F. The red LED will be on while charging. Please charge the battery for a minimum of 2 hours. When charging is complete, the red LED will turn OFF.
Play / Pause
Accept / Disconnect Call
Press the once to play / pause music
Press the once to play / pause music
Press the once to accept / disconnect phone calls
Radio and TV interference Statement
WARNING!!! This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by whatever measures may be required to correct the interference.
Warranty
Aluratek warrants this product against defect in material or workmanship for 1 YEAR from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has been removed or altered on the product.
This warranty does not cover: A) Cosmetic damage or damage due to acts of God B) Accident, misuse, abuse, negligence or modification of any part of the product. C) Damage due to improper operation or maintenance, connection to improper equipment, or attempted repair by anyone other than Aluratek. D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR IT'S DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's products, contents or use of this documentation and all accompanying software, and specifically disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek reserves the right to revise or update it's product, software or documentation without obligation to notify any individual or entity.
Technical Support
If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.
E-mail: support@aluratek.com Web: www.aluratek.com/helpdesk Local (Irvine, CA): 714-586-8730 Toll free: 1-866-580-1978
Loading...