Altronix WAYPOINT17AU, WAYPOINT17A8DU, WAYPOINT17A8U Installation Guide

WayPoint17A Series

AC Outdoor Power Supplies

Installation Guide

Models Include:

WayPoint17AU

- 24VAC @ 7.25A and/or 28VAC @ 6.25A.

- Two (2) fuse protected outputs.

WayPoint17A4U

- 24VAC @ 7.25A and/or 28VAC @ 6.25A.

- Four (4) fuse protected outputs.

WayPoint17A8U

- 24VAC @ 7.25A and/or 28VAC @ 6.25A.

- Eight (8) fuse protected outputs.

Rev. 091514-17A

WayPoint17ADU

- 24VAC @ 7.25A and/or 28VAC @ 6.25A.

- Two (2) PTC protected outputs.

WayPoint17A4DU

- 24VAC @ 7.25A and/or 28VAC @ 6.25A.

- Four (4) PTC protected outputs.

WayPoint17A8DU

- 24VAC @ 7.25A and/or 28VAC @ 6.25A.

- Eight (8) PTC protected outputs.

More than just power.

TM

Altronix WayPoint Outdoor Power Supplies provide 24VAC and/or 28VAC distributed via two (2), four (4) or

COM 24V 28V

COM 24V 28V

PD2WP

28V 24V COM

Input Voltage

Power Input

115V

115

230

LGN

ALTRONIX CORP.

www.altronix.com

BROOKLYN,NY 11220

eight (8) outputs for powering CCTV cameras, heaters, and other video accessories.

WayPoint17A Series AC Reference Chart:

Overview:

Altronix
Model Number Output Voltage

24VAC 7.25A

WayPoint17AU

24VAC and 28VAC 6.25A 1 of each

24VAC 7.25A

WayPoint17ADU

24VAC and 28VAC 6.25A 1 of each

WayPoint17A4U

WayPoint17A4DU

WayPoint17A8U

WayPoint17A8DU

*Lower rated fuses can be used.

24VAC 7.25A

28VAC 6.25A

24VAC 7.25A

28VAC 6.25A

24VAC 7.25A

28VAC 6.25A

24VAC 7.25A

28VAC 6.25A

Total

Output
Current
(Power)

Number

and Type

of Outputs

4 Fused

4 PTCs ----- 2.5A 5.95kg

8 Fused

8 PTCs ----- 2.5A 6.1kg

Fuse
Output
Ratings

2

5A/

32V*

2

----- 2.5A 5.95kg28VAC 6.25A

5A/

32V*

5A/

32V*

Input Current Draw

PTC

Output

115VAC

Ratings

60Hz

-----

2.0A 1A

----- 5.95kg

----- 6.1kg

230VAC

50Hz

Product

Weight

5.95kg28VAC 6.25A

Specifications:

Agency Listings:

• UL/cUL Listed:
UL 60950-1 Information Technology Equipment.
UL 60950-22 Equipment to be Installed Outdoors.

• CE European Conformity.

Input:

• Input: 115VAC, 60Hz, 2A or 230VAC, 50Hz, 1A.

Output:

• Output options:
a. 24VAC or 28VAC.
b. Both 24VAC and 28VAC
(WayPoint17AU/ADU only).

• Fuse ratings:
WayPoint17A Series incorporate 5A/32V fuses.

Visual Indicators:

• Individual power output LED indicators.

• Illuminated master power switch.

Features:

• Surge suppression.

• Spare fuses included.

Accessories:

• Optional PMK1 Pole Mount Kit simplifies
installation of outdoor units.

Enclosure:

• NEMA 4/4X, IP66-11 Rated enclosure for
outdoor use.

• Enclosure Dimensions (H x W x D approx.):

13.31” x 11.31” x 5.59”
(338.1 mm x 287.3 mm x 142 mm).

Installation Instructions:

Unit shall be installed in accordance with The National Electrical Code and all applicable Local Regulations.

1. Remove backplane from enclosure prior to mounting (do not discard hardware).

2. Mark and drill desired inlets on the enclosure to facilitate wiring (Fig. 1, pg. 4).
Note: Inlets for conduit fittings should only be made on the bottom of the enclosure.
UL Listed NEMA type 4X rated conduit connector/hubs shall be used for the appropriate size inlets.

3. Mount unit in desired location. Mark and drill holes to line up with the top and bottom holes of the
enclosure flange. Secure enclosure with appropriate fasteners (Fig. 5, pg. 7 and Fig. 11, pg. 8).

4. Mount back plane to enclosure with hardware.

5. Set the input voltage selector switch for 115VAC or 230VAC operation (Figs. 2-4, pgs. 4-6)

6. To facilitate wire entry utilize weather-tight NEMA 4 rated connectors, bushings, and cable.

7. Set illuminated master power disconnect circuit breaker to the [OFF] position (Figs. 2-4, pgs. 4-6).

8. Connect unswitched AC power (115VAC/230VAC, 50/60 Hz) to terminals marked [L, N]
(Figs. 2-4, pgs. 4-6). Green branch wire connects to earth (safety) ground lug .
Wire gauge range of connectors is 14 AWG to 11 AWG (1.6 mm to 2.5 mm diameter).

9. Set illuminated master power disconnect circuit breaker to the [RESET/ON] position (Figs. 2-4, pgs. 4-6).

- 2 - WayPoint17A Series

10. WayPoint17A4U/A4DU, WayPoint17A8U/A8DU are factory set for 24VAC operation.
For 28VAC operation adjust unit prior to mounting and applying power as follows:
Change the wire position so that the black wire [28V] is connected to the terminal marked [P] and
the yellow wire [24V] is connected to the terminal marked [S].

11. Measure output voltage on terminals marked [COM, 24V, 28V] on WayPoint17AU or WayPoint17ADU
(Fig. 2, pg. 4) or [1-4] or [1-8 COM] on WayPoint17A4U, WayPoint17A4DU, WayPoint17A8U and
WayPoint17A8DU before connecting devices (Fig. 3, pg. 5, Fig. 4, pg. 6).
This helps avoiding potential damage.

12. Set illuminated master power disconnect circuit breaker to the [OFF] position (Figs. 2-4, pgs. 4-6).

13. Connecting devices to WayPoint17AU or WayPoint17ADU:
For 24VAC output connect devices to terminals marked [COM, 24V] (Fig. 2, pg. 4).
For 28VAC output connect devices to terminals marked [COM, 28V] (Fig. 2, pg. 4).
Connecting devices to WayPoint17A4U or WayPoint17A4DU:
Connect device to terminals marked [1-4] and [COM] (Fig. 3, pg. 5).

Connecting devices to WayPoint17A8U or WayPoint17A8DU:

Connect device to terminals marked [1-8] and [COM] (Fig. 4, pg. 6).

14. Set illuminated master power disconnect circuit breaker to the [RESET/ON] position (Figs. 2-4, pgs. 4-6).

15. LEDs will illuminate indicating each output is powered (Figs. 2-4, pgs. 4-6).

16. Upon completion of wiring secure enclosure door with latches and optional lock.
Caution: Equipment to be installed / serviced by authorized / trained personnel only.

Shut branch circuit power before installing / servicing equipment.

WARNING: When installing in a non-restricted service area use lock or other fastened means on door
latches. This installation should be made by qualified service personnel and should conform to the
National Electrical Code and all local codes.

LED Identification Chart:

ON OFF

Normal operating condition.

No AC output. Blown fuse or tripped PTC, illuminated master power disconnect
circuit breaker is tripped or OFF, AC failure.

To reset a tripped PTC turn the power off for 1 minute and then turn it back on.

Technical Specifications:

Parameter Description
Input power requirements

Indicators

Environmental Conditions

Regulatory Compliance

115VAC, 60Hz, 2A or 230VAC, 50Hz, 1A.
Individual power output LED indicators.

Illuminated master power switch.

Operating Ambient Temperature:

For 24VAC @ 4A output: - 40°C to 60°C (- 40°F to 140ºF).
For 28VAC @ 3.5A output: - 40°C to 70°C (- 40°F to 158ºF).

Relative Humidity: 85%, +/- 5%
Storage Temperature: - 40ºC to 75ºC (- 40ºF to 167ºF).
Operating Altitude: - 304.8 to 2,000m.

UL/cUL Listed for Information Technology Equipment (UL 60950-1)

Equipment to be Installed Outdoors (UL 60950-22).

CE European Conformity.

For fuse protected models:

Replace fuses with the same type and rating 5A/32V.

5A

32V

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may
be of sufficient magnitude to constitute an electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.

CAUTION: To reduce the risk of electric shock do not open
enclosure. There are no user serviceable parts inside.
Refer servicing to qualified service personnel.

WayPoint17A Series - 3 -